Re: [PATCH v2 1/3] clk: bcm2835: Add bindings for the auxiliary peripheral clock gates.

[Eric Anholt <eric@anholt.net>]

[-- Attachment #1: Type: text/plain, Size: 1196 bytes --]

Michael Turquette <mturquette@baylibre.com> writes:

> On Fri, Dec 18, 2015 at 8:19 PM, Rob Herring <robh@kernel.org> wrote:
>> On Tue, Dec 15, 2015 at 03:35:57PM -0800, Eric Anholt wrote:
>>> These will be used for enabling UART1, SPI1, and SPI2.
>>>
>>> Signed-off-by: Eric Anholt <eric@anholt.net>
>>> ---
>>>
>>> v2: Make the binding cover both the IRQ and clock enable registers.
>>>
>>>  .../bindings/clock/brcm,bcm2835-aux-clock.txt      | 31 ++++++++++++++++++++++
>>>  include/dt-bindings/clock/bcm2835-aux.h            | 17 ++++++++++++
>>>  2 files changed, 48 insertions(+)
>>>  create mode 100644 Documentation/devicetree/bindings/clock/brcm,bcm2835-aux-clock.txt
>>>  create mode 100644 include/dt-bindings/clock/bcm2835-aux.h
>>
>> Acked-by: Rob Herring <robh@kernel.org>
>
> Applied to clk-next.
>
> Next time if you put the header into the clk driver patch then we can
> send the binding description through the DT tree and take the header
> and C file through the clk tree in one patch.

I would *love* to do that, but I've previously been told that having the
bindings patch reference a header file not present as of the bindings
patch is not acceptable and made to change it.

[-- Attachment #2: signature.asc --]
[-- Type: application/pgp-signature, Size: 818 bytes --]