Re: [PATCH v2 0/3] platform/x86: simatic-ipc: add another model and hwmon module loading

[Hans de Goede <hdegoede@redhat.com>]

Hi Henning,

On 7/13/23 16:48, Henning Schild wrote:
> cahnged since v1:
>  - switch to using a list of modules per device
>  - add p3 and make the watchdog module load code use what p2 created
> 
> The first patch just adds a device that is pretty similar to another one
> we already had here.
> 
> The second patch loads modules for hwmon support, should they be
> available. That will save users the need to detect and manually load
> those modules after a machine has been clearly identified by its Siemens
> Simatic IPC station id.
> 
> And finally p3 changes another request_module call to use the mechanism
> introduced in p2.
> 
> Henning Schild (3):
>   platform/x86: simatic-ipc: add another model
>   platform/x86: simatic-ipc: add auto-loading of hwmon modules
>   platform/x86: simatic-ipc: use extra module loading for watchdog
> 
>  drivers/platform/x86/simatic-ipc.c            | 74 ++++++++++++++-----
>  include/linux/platform_data/x86/simatic-ipc.h |  1 +
>  2 files changed, 57 insertions(+), 18 deletions(-)

p.s.

Looking at the latest simatic pdx86 code:

https://git.kernel.org/pub/scm/linux/kernel/git/pdx86/platform-drivers-x86.git/log/?h=platform-drivers-x86-simatic-ipc

I see 5 Kconfig options and 5 .c files directly under

drivers/platform/x86/

at this point I think it would be nice to move this into its
own simatic subdir: drivers/platform/x86/simatic

with its own Makefile and Kconfig to avoid cluttering the main
drivers/platform/x86 dir and Kconfig too much.

Can you prepare a patch for this on top of:

https://git.kernel.org/pub/scm/linux/kernel/git/pdx86/platform-drivers-x86.git/log/?h=platform-drivers-x86-simatic-ipc

?

See:

https://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git/commit/?id=f1e1ea516721d1ea0b21327ff9e6cb2c2bb86e28

For an example of a similar move done for Dell.

Note this example also adds

"default m"

to all options except for the main X86_PLATFORM_DRIVERS_DELL (X86_PLATFORM_DRIVERS_SIMATIC in this case) so that on interactive make config only the X86_PLATFORM_DRIVERS_SIMATIC will gets asked about and then the rest will automatically get enabled as modules.

Regards,

Hans