From: Lian Wang <lianux.mm@gmail.com>
To: linux-mm@kvack.org
Cc: linux-kernel@vger.kernel.org,
Andrew Morton <akpm@linux-foundation.org>,
Chris Li <chrisl@kernel.org>, Nhat Pham <nphamcs@gmail.com>,
Baoquan He <baoquan.he@linux.dev>, Barry Song <baohua@kernel.org>,
Youngjun Park <youngjun.park@lge.com>,
Kemeng Shi <shikemeng@huaweicloud.com>,
Kairui Song <kasong@tencent.com>, Jihan LIN <linjh22s@gmail.com>,
Kunwu Chan <kunwu.chan@linux.dev>, Kees Cook <kees@kernel.org>,
"Gustavo A. R. Silva" <gustavoars@kernel.org>,
Thomas Gleixner <tglx@kernel.org>,
linux-hardening@vger.kernel.org
Subject: [RFC PATCH v4 09/18] mm/swap: avoid direct reclaim when populating swap cluster metadata
Date: Sat, 14 Nov 2026 22:50:40 +0800 [thread overview]
Message-ID: <88057ceeb0228fd33f42637a3c9647eea74d5d95.1794666741.git.lianux.mm@gmail.com> (raw)
In-Reply-To: <cover.1794666741.git.lianux.mm@gmail.com>
Swap cluster population is entered from swap allocation and may itself
need memory for slot metadata. Its fallback drops the device and cluster
locks before allocating with GFP_KERNEL, which can reenter swap
allocation through direct reclaim.
Make this allocation boundary explicitly non-reclaiming so callers can
retain outer synchronization without a recursive swap allocation.
Clear __GFP_DIRECT_RECLAIM from the fallback request while retaining
__GFP_HIGH and __GFP_NOMEMALLOC. The retry can still wake kswapd, but
fails without direct reclaim when memory is unavailable.
This can make metadata allocation fail earlier under memory pressure.
Keep the existing isolated-cluster rollback and restrict this request
without adding a task-wide PF_MEMALLOC scope.
Signed-off-by: Lian Wang <lianux.mm@gmail.com>
---
mm/swapfile.c | 23 +++++++++++++----------
1 file changed, 13 insertions(+), 10 deletions(-)
diff --git a/mm/swapfile.c b/mm/swapfile.c
index c46b43414bf4..fae862fc873c 100644
--- a/mm/swapfile.c
+++ b/mm/swapfile.c
@@ -586,13 +586,14 @@ static void swap_cluster_assert_empty(struct swap_cluster_info *ci,
}
/*
- * Allocate swap table for one cluster. Attempt an atomic allocation first,
- * then fallback to sleeping allocation.
+ * Allocate swap table for one cluster. Attempt allocation under the locks
+ * first, then retry with the locks dropped without entering direct reclaim.
*/
static struct swap_cluster_info *
swap_cluster_populate(struct swap_info_struct *si,
struct swap_cluster_info *ci)
{
+ gfp_t gfp;
int ret;
/*
@@ -610,9 +611,11 @@ swap_cluster_populate(struct swap_info_struct *si,
return ci;
/*
- * Try a sleep allocation. Each isolated free cluster may cause
- * a sleep allocation, but there is a limited number of them, so
- * the potential recursive allocation is limited.
+ * Drop the device and cluster locks before retrying. Metadata allocation
+ * must not recurse into swap allocation through direct reclaim: callers
+ * can retain outer synchronization across cluster population. Restrict
+ * this request instead of granting the task PF_MEMALLOC, which could
+ * give allocator hooks and failure cleanup reserve access.
*/
spin_unlock(&ci->lock);
if (si->flags & SWP_SOLIDSTATE)
@@ -620,8 +623,9 @@ swap_cluster_populate(struct swap_info_struct *si,
else
spin_unlock(&si->global_cluster->lock);
- ret = swap_cluster_alloc_table(si, ci, __GFP_HIGH | __GFP_NOMEMALLOC |
- GFP_KERNEL, false);
+ gfp = (GFP_KERNEL | __GFP_HIGH | __GFP_NOMEMALLOC) &
+ ~__GFP_DIRECT_RECLAIM;
+ ret = swap_cluster_alloc_table(si, ci, gfp, false);
/*
* Back to atomic context. We might have migrated to a new CPU with a
@@ -3160,9 +3164,8 @@ static int swap_device_disable(struct address_space *mapping,
return err;
/*
- * The swap allocator doesn't take swapon_rwsem. Looping through every
- * cluster lock after clearing SWP_WRITEOK ensures that allocators see
- * the updated flag and that no allocation remains in flight.
+ * Drain cluster-lock users after clearing SWP_WRITEOK, so swapoff
+ * does not race with operations that started before the transition.
*/
for (offset = 0; offset < end; offset += SWAPFILE_CLUSTER) {
ci = swap_cluster_lock(si, offset);
next prev parent reply other threads:[~2026-11-14 14:50 UTC|newest]
Thread overview: 19+ messages / expand[flat|nested] mbox.gz Atom feed top
2026-11-14 14:47 [RFC PATCH v4 00/18] mm/swap: introduce priority queues for swap device allocation Lian Wang
2026-11-14 14:48 ` [RFC PATCH v4 01/18] mm/swap: remove unused parameter for reading swap header Lian Wang
2026-11-14 14:49 ` [RFC PATCH v4 02/18] mm/swap: clean up hibernation error handling Lian Wang
2026-11-14 14:49 ` [RFC PATCH v4 03/18] mm/swap: cleanup and document swap device availability flag usage Lian Wang
2026-11-14 14:49 ` [RFC PATCH v4 04/18] mm/swap: introduce swap device iteration helper Lian Wang
2026-11-14 14:49 ` [RFC PATCH v4 05/18] mm/swap: change the swapon lock into a percpu rwsem Lian Wang
2026-11-14 14:49 ` [RFC PATCH v4 06/18] mm/swap: serialize swap publication before removing swapon mutex Lian Wang
2026-11-14 14:50 ` [RFC PATCH v4 07/18] mm/swap: consolidate swap inuse accounting helpers Lian Wang
2026-11-14 14:50 ` [RFC PATCH v4 08/18] mm/swap: change back to use each swap device's percpu cluster Lian Wang
2026-11-14 14:50 ` Lian Wang [this message]
2026-11-14 14:50 ` [RFC PATCH v4 10/18] mm/swap: add priority queue for swap device allocation Lian Wang
2026-11-14 14:51 ` [RFC PATCH v4 11/18] mm/swap: remove available list Lian Wang
2026-11-14 14:51 ` [RFC PATCH v4 12/18] mm/swap: bound synchronous discard outside the allocation reader Lian Wang
2026-11-14 14:51 ` [RFC PATCH v4 13/18] mm/swap: drop swap active plist Lian Wang
2026-11-14 14:51 ` [RFC PATCH v4 14/18] lib/plist.c: remove requeue function Lian Wang
2026-11-14 14:52 ` [RFC PATCH v4 15/18] mm/swap: reuse per-CPU queue readers across priority changes Lian Wang
2026-11-14 14:52 ` [RFC PATCH v4 16/18] mm/swap: advance the global queue cursor directly between priority rings Lian Wang
2026-11-14 14:52 ` [RFC PATCH v4 17/18] mm/swap: skip reader rotation for single-device " Lian Wang
2026-11-14 14:52 ` [RFC PATCH v4 18/18] mm/swap: redistribute queue readers after membership changes Lian Wang
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=88057ceeb0228fd33f42637a3c9647eea74d5d95.1794666741.git.lianux.mm@gmail.com \
--to=lianux.mm@gmail.com \
--cc=akpm@linux-foundation.org \
--cc=baohua@kernel.org \
--cc=baoquan.he@linux.dev \
--cc=chrisl@kernel.org \
--cc=gustavoars@kernel.org \
--cc=kasong@tencent.com \
--cc=kees@kernel.org \
--cc=kunwu.chan@linux.dev \
--cc=linjh22s@gmail.com \
--cc=linux-hardening@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-mm@kvack.org \
--cc=nphamcs@gmail.com \
--cc=shikemeng@huaweicloud.com \
--cc=tglx@kernel.org \
--cc=youngjun.park@lge.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox
all inboxes | Powered by JetHome®