From: Niklas Cassel <niklas.cassel@axis.com>
To: Joao Pinto <Joao.Pinto@synopsys.com>,
David Miller <davem@davemloft.net>, <pavel@ucw.cz>
Cc: <LinoSanfilippo@gmx.de>, <peppe.cavallaro@st.com>,
<alexandre.torgue@st.com>, <linux-kernel@vger.kernel.org>,
<netdev@vger.kernel.org>
Subject: Re: [PATCH] stmmac: fix memory barriers
Date: Mon, 19 Dec 2016 18:19:14 +0100 [thread overview]
Message-ID: <886b24a5-6d54-4bd5-2143-d8f2cbe6c746@axis.com> (raw)
In-Reply-To: <79efbe1a-bdc3-2aca-88a2-42a1b29f292d@synopsys.com>
On 12/19/2016 06:10 PM, Joao Pinto wrote:
> Hi,
>
> I am trying to built net-next git tree and it is failing:
>
> CC drivers/pnp/card.o
> drivers/net/ethernet/stmicro/stmmac/stmmac_main.c: In function
> ‘stmmac_hw_fix_mac_speed’:
> drivers/net/ethernet/stmicro/stmmac/stmmac_main.c:224:34: error: ‘struct
> stmmac_priv’ has no member named ‘phydev’
> struct phy_device *phydev = priv->phydev;
Are you really building net-next?
http://git.kernel.org/cgit/linux/kernel/git/davem/net-next.git/tree/drivers/net/ethernet/stmicro/stmmac/stmmac_main.c#n224
The phy_device initializer does not appear to match your output.
> ^
> drivers/net/ethernet/stmicro/stmmac/stmmac_main.c: In function ‘stmmac_eee_init’:
> drivers/net/ethernet/stmicro/stmmac/stmmac_main.c:298:24: error: ‘struct
> stmmac_priv’ has no member named ‘phydev’
> if (phy_init_eee(priv->phydev, 1)) {
> ^
> drivers/net/ethernet/stmicro/stmmac/stmmac_main.c:330:44: error: ‘struct
> stmmac_priv’ has no member named ‘phydev’
> priv->hw->mac->set_eee_pls(priv->hw, priv->phydev->link);
> ^
> drivers/net/ethernet/stmicro/stmmac/stmmac_main.c: In function ‘stmmac_init_ptp’:
> drivers/net/ethernet/stmicro/stmmac/stmmac_main.c:672:2: error: void value not
> ignored as it ought to be
> return stmmac_ptp_register(priv);
> ^
> drivers/net/ethernet/stmicro/stmmac/stmmac_main.c: In function ‘stmmac_adjust_link’:
> drivers/net/ethernet/stmicro/stmmac/stmmac_main.c:694:34: error: ‘struct
> stmmac_priv’ has no member named ‘phydev’
> struct phy_device *phydev = priv->phydev;
> ^
> drivers/net/ethernet/stmicro/stmmac/stmmac_main.c: In function ‘stmmac_init_phy’:
> drivers/net/ethernet/stmicro/stmmac/stmmac_main.c:884:6: error: ‘struct
> stmmac_priv’ has no member named ‘phydev’
> priv->phydev = phydev;
> ^
> drivers/net/ethernet/stmicro/stmmac/stmmac_main.c: In function ‘stmmac_open’:
> drivers/net/ethernet/stmicro/stmmac/stmmac_main.c:1810:10: error: ‘struct
> stmmac_priv’ has no member named ‘phydev’
> if (priv->phydev)
> ^
> drivers/net/ethernet/stmicro/stmmac/stmmac_main.c:1811:17: error: ‘struct
> stmmac_priv’ has no member named ‘phydev’
> phy_start(priv->phydev);
> ^
> drivers/net/ethernet/stmicro/stmmac/stmmac_main.c:1858:10: error: ‘struct
> stmmac_priv’ has no member named ‘phydev’
> if (priv->phydev)
> ^
> drivers/net/ethernet/stmicro/stmmac/stmmac_main.c:1859:22: error: ‘struct
> stmmac_priv’ has no member named ‘phydev’
> phy_disconnect(priv->phydev);
> ^
> drivers/net/ethernet/stmicro/stmmac/stmmac_main.c: In function ‘stmmac_release’:
> drivers/net/ethernet/stmicro/stmmac/stmmac_main.c:1878:10: error: ‘struct
> stmmac_priv’ has no member named ‘phydev’
> if (priv->phydev) {
> ^
> drivers/net/ethernet/stmicro/stmmac/stmmac_main.c:1879:16: error: ‘struct
> stmmac_priv’ has no member named ‘phydev’
> phy_stop(priv->phydev);
> ^
> drivers/net/ethernet/stmicro/stmmac/stmmac_main.c:1880:22: error: ‘struct
> stmmac_priv’ has no member named ‘phydev’
> phy_disconnect(priv->phydev);
> ^
> drivers/net/ethernet/stmicro/stmmac/stmmac_main.c:1881:7: error: ‘struct
> stmmac_priv’ has no member named ‘phydev’
> priv->phydev = NULL;
> ^
> drivers/net/ethernet/stmicro/stmmac/stmmac_main.c: In function ‘stmmac_ioctl’:
> drivers/net/ethernet/stmicro/stmmac/stmmac_main.c:2883:12: error: ‘struct
> stmmac_priv’ has no member named ‘phydev’
> if (!priv->phydev)
> ^
> drivers/net/ethernet/stmicro/stmmac/stmmac_main.c:2885:27: error: ‘struct
> stmmac_priv’ has no member named ‘phydev’
> ret = phy_mii_ioctl(priv->phydev, rq, cmd);
> ^
> drivers/net/ethernet/stmicro/stmmac/stmmac_main.c: In function ‘stmmac_suspend’:
> drivers/net/ethernet/stmicro/stmmac/stmmac_main.c:3438:10: error: ‘struct
> stmmac_priv’ has no member named ‘phydev’
> if (priv->phydev)
> ^
> drivers/net/ethernet/stmicro/stmmac/stmmac_main.c:3439:16: error: ‘struct
> stmmac_priv’ has no member named ‘phydev’
> phy_stop(priv->phydev);
> ^
> drivers/net/ethernet/stmicro/stmmac/stmmac_main.c: In function ‘stmmac_resume’:
> drivers/net/ethernet/stmicro/stmmac/stmmac_main.c:3533:10: error: ‘struct
> stmmac_priv’ has no member named ‘phydev’
> if (priv->phydev)
> ^
> drivers/net/ethernet/stmicro/stmmac/stmmac_main.c:3534:17: error: ‘struct
> stmmac_priv’ has no member named ‘phydev’
> phy_start(priv->phydev);
> ^
> drivers/net/ethernet/stmicro/stmmac/stmmac_main.c: In function ‘stmmac_init_ptp’:
> drivers/net/ethernet/stmicro/stmmac/stmmac_main.c:673:1: warning: control
> reaches end of non-void function [-Wreturn-type]
> }
> ^
> CC drivers/pnp/driver.o
> make[5]: *** [drivers/net/ethernet/stmicro/stmmac/stmmac_main.o] Error 1
> make[4]: *** [drivers/net/ethernet/stmicro/stmmac] Error 2
> make[3]: *** [drivers/net/ethernet/stmicro] Error 2
> make[3]: *** Waiting for unfinished jobs....
> CC drivers/pnp/resource.o
>
> Thanks,
> Joao
>
> Às 4:06 PM de 12/19/2016, David Miller escreveu:
>> From: Pavel Machek <pavel@ucw.cz>
>> Date: Sun, 18 Dec 2016 21:38:12 +0100
>>
>>> Fix up memory barriers in stmmac driver. They are meant to protect
>>> against DMA engine, so smp_ variants are certainly wrong, and dma_
>>> variants are preferable.
>>>
>>> Signed-off-by: Pavel Machek <pavel@denx.de>
>> Applied.
>>
next prev parent reply other threads:[~2016-12-19 17:19 UTC|newest]
Thread overview: 7+ messages / expand[flat|nested] mbox.gz Atom feed top
2016-12-18 20:38 Pavel Machek
2016-12-19 15:08 ` Niklas Cassel
2016-12-19 15:36 ` Giuseppe CAVALLARO
2016-12-19 16:06 ` David Miller
2016-12-19 17:10 ` Joao Pinto
2016-12-19 17:19 ` Niklas Cassel [this message]
2016-12-19 17:25 ` Joao Pinto
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=886b24a5-6d54-4bd5-2143-d8f2cbe6c746@axis.com \
--to=niklas.cassel@axis.com \
--cc=Joao.Pinto@synopsys.com \
--cc=LinoSanfilippo@gmx.de \
--cc=alexandre.torgue@st.com \
--cc=davem@davemloft.net \
--cc=linux-kernel@vger.kernel.org \
--cc=netdev@vger.kernel.org \
--cc=pavel@ucw.cz \
--cc=peppe.cavallaro@st.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox
all inboxes | Powered by JetHome®