mirror of https://lore.kernel.org/lkml/
 help / color / mirror / Atom feed
From: Tessolve Upstream <tessolveupstream@gmail.com>
To: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
Cc: konradybcio@kernel.org, andersson@kernel.org, robh@kernel.org,
	krzk+dt@kernel.org, conor+dt@kernel.org,
	linux-arm-msm@vger.kernel.org, devicetree@vger.kernel.org,
	linux-kernel@vger.kernel.org, tingweiz@qti.qualcomm.com
Subject: Re: [PATCH 2/2] arm64: dts: qcom: Add support for QCS615 talos evk board
Date: Mon, 15 Sep 2025 17:41:05 +0530	[thread overview]
Message-ID: <887a6141-34a1-4a26-bc97-0bf16738442b@gmail.com> (raw)
In-Reply-To: <5oytapnerwmttc62q7s2vxlrtmcfg3bhiycpw4enak6zyaioyh@s4drz5x7hoi4>



On 09/09/25 19:32, Dmitry Baryshkov wrote:
> On Tue, Sep 09, 2025 at 06:22:55PM +0530, Sudarshan Shetty wrote:
>> Introduce the device tree support for the QCS615-based talos-evk
>> platform, which follows the SMARC (Smart Mobility ARChitecture)
>> standard. The platform is composed of two main hardware
>> components: the IQ-QCS615-SOM and the talos-evk carrier board.
>>
>> The IQ-QCS615-SOM is a compact System on Module that integrates the
>> QCS615 SoC, PMIC, and essential GPIO connectivity. It follows the
>> SMARC standard, which defines a modular form factor allowing the SoM
>> to be paired with different carrier boards for varied applications.
>>
>> The talos-evk is one such carrier board, designed for evaluation
>> and development purposes. It provides additional peripherals
>> such as UART, USB, and other interfaces to enable rapid
>> prototyping and hardware bring-up.
>>
>> This initial device tree provides the basic configuration needed
>> to boot the platform to a UART shell. Further patches will extend
>> support for additional peripherals and subsystems.
>>
>> The initial device tree includes basic support for:
>>
>> - CPU and memory
>>
>> - UART
>>
>> - GPIOs
>>
>> - Regulators
>>
>> - PMIC
>>
>> - Early console
>>
>> - AT24MAC602 EEPROM
>>
>> - MCP2515 SPI to CAN
>>
>> Signed-off-by: Sudarshan Shetty <tessolveupstream@gmail.com>
>> ---
>>
>> This series depend on the below patch changes
>> https://lore.kernel.org/linux-arm-msm/20250625063213.1416442-1-quic_ziyuzhan@quicinc.com/T/#t
>> https://lore.kernel.org/all/20241224-fix-board-clocks-v3-0-e9b08fbeadd3@linaro.org/
>> https://lore.kernel.org/linux-arm-msm/20250604-qcs615-sm6150-v1-0-2f01fd46c365@oss.qualcomm.com/T/#t
>> ---
>>  arch/arm64/boot/dts/qcom/Makefile        |   1 +
>>  arch/arm64/boot/dts/qcom/qcs615-som.dtsi | 414 +++++++++++++++++++++++
>>  arch/arm64/boot/dts/qcom/talos-evk.dts   |  42 +++
>>  3 files changed, 457 insertions(+)
>>  create mode 100644 arch/arm64/boot/dts/qcom/qcs615-som.dtsi
>>  create mode 100644 arch/arm64/boot/dts/qcom/talos-evk.dts
>>
>> diff --git a/arch/arm64/boot/dts/qcom/Makefile b/arch/arm64/boot/dts/qcom/Makefile
>> index 4bfa926b6a08..588dc55995c5 100644
>> --- a/arch/arm64/boot/dts/qcom/Makefile
>> +++ b/arch/arm64/boot/dts/qcom/Makefile
>> @@ -117,6 +117,7 @@ dtb-$(CONFIG_ARCH_QCOM)	+= qcm6490-shift-otter.dtb
>>  dtb-$(CONFIG_ARCH_QCOM)	+= qcs404-evb-1000.dtb
>>  dtb-$(CONFIG_ARCH_QCOM)	+= qcs404-evb-4000.dtb
>>  dtb-$(CONFIG_ARCH_QCOM)	+= qcs615-ride.dtb
>> +dtb-$(CONFIG_ARCH_QCOM)	+= talos-evk.dtb
>>  dtb-$(CONFIG_ARCH_QCOM)	+= qcs6490-rb3gen2.dtb
> 
> BTW, 'talos' > 'qsc6490'. I think the list is expected to be sorted.
Yes it is, Will sort it in v2 patch. Thanks
> 


  parent reply	other threads:[~2025-09-15 12:11 UTC|newest]

Thread overview: 28+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2025-09-09 12:52 [PATCH 1/2] dt-bindings: arm: qcom: add bindings " Sudarshan Shetty
2025-09-09 12:52 ` [PATCH 2/2] arm64: dts: qcom: Add support " Sudarshan Shetty
2025-09-09 13:58   ` Dmitry Baryshkov
2025-09-16  5:52     ` Tessolve Upstream
2025-09-16 10:25       ` Dmitry Baryshkov
2025-09-17  5:30         ` Tessolve Upstream
2025-09-17 13:38           ` Dmitry Baryshkov
2025-09-18  5:23             ` Sudarshan Shetty
2025-09-09 14:02   ` Dmitry Baryshkov
2025-09-09 14:05     ` Krzysztof Kozlowski
2025-09-15 12:23       ` Tessolve Upstream
2025-09-15 12:11     ` Tessolve Upstream [this message]
2025-09-09 14:26   ` Bjorn Andersson
2025-09-16  5:47     ` Tessolve Upstream
2025-09-16 10:29       ` Dmitry Baryshkov
2025-09-22  8:54         ` Tessolve Upstream
2025-09-09 13:50 ` [PATCH 1/2] dt-bindings: arm: qcom: add bindings " Dmitry Baryshkov
2025-09-15  5:51   ` Tessolve Upstream
2025-09-09 13:57 ` Krzysztof Kozlowski
2025-09-15  5:53   ` Tessolve Upstream
2025-09-09 14:27 ` Bjorn Andersson
2025-09-15  5:54   ` Tessolve Upstream
2025-10-10 11:47   ` [PATCH v2 1/2] dt-bindings: arm: qcom: Add QCS615 Talos EVK SMARC platform Sudarshan Shetty
2025-10-10 11:47     ` [PATCH v2 2/2] arm64: dts: qcom: Add support for QCS615 talos evk board Sudarshan Shetty
2025-10-10 12:19       ` Dmitry Baryshkov
2025-10-13  9:04         ` Tessolve Upstream
2025-10-13  9:42           ` Dmitry Baryshkov
2025-10-10 12:13     ` [PATCH v2 1/2] dt-bindings: arm: qcom: Add QCS615 Talos EVK SMARC platform Dmitry Baryshkov

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=887a6141-34a1-4a26-bc97-0bf16738442b@gmail.com \
    --to=tessolveupstream@gmail.com \
    --cc=andersson@kernel.org \
    --cc=conor+dt@kernel.org \
    --cc=devicetree@vger.kernel.org \
    --cc=dmitry.baryshkov@oss.qualcomm.com \
    --cc=konradybcio@kernel.org \
    --cc=krzk+dt@kernel.org \
    --cc=linux-arm-msm@vger.kernel.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=robh@kernel.org \
    --cc=tingweiz@qti.qualcomm.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox

all inboxes | Powered by JetHome®