mirror of https://lore.kernel.org/lkml/
 help / color / mirror / Atom feed
From: Imran Khan <imran.f.khan@oracle.com>
To: paulmck@kernel.org
Cc: Peter Zijlstra <peterz@infradead.org>,
	Valentin Schneider <vschneid@redhat.com>,
	Juergen Gross <jgross@suse.com>,
	Leonardo Bras <leobras@redhat.com>,
	Kernel Mailing List <linux-kernel@vger.kernel.org>
Subject: Re: [PATCH smp,csd] Throw an error if a CSD lock is stuck for too long
Date: Tue, 10 Oct 2023 15:58:43 +1100	[thread overview]
Message-ID: <89062478-fa97-c265-3b18-de55eeae3c1f@oracle.com> (raw)
In-Reply-To: <a77da319-3161-4e42-894e-521d29fa8348@paulmck-laptop>

Hello Paul,

On 10/10/2023 3:39 am, Paul E. McKenney wrote:
> On Fri, Oct 06, 2023 at 10:32:07AM +1100, Imran Khan wrote:
>> Hello Paul,
>>
>> On 6/10/2023 3:48 am, Paul E. McKenney wrote:
>>> The CSD lock seems to get stuck in 2 "modes". When it gets stuck
>>> temporarily, it usually gets released in a few seconds, and sometimes
>>> up to one or two minutes.
>>>
>>> If the CSD lock stays stuck for more than several minutes, it never
>>> seems to get unstuck, and gradually more and more things in the system
>>> end up also getting stuck.
>>>
>>> In the latter case, we should just give up, so the system can dump out
>>> a little more information about what went wrong, and, with panic_on_oops
>>> and a kdump kernel loaded, dump a whole bunch more information about
>>> what might have gone wrong.
>>>
>>> Question: should this have its own panic_on_ipistall switch in
>>> /proc/sys/kernel, or maybe piggyback on panic_on_oops in a different
>>> way than via BUG_ON?
>>>
>> panic_on_ipistall (set to 1 by default) looks better option to me. For systems
>> where such delay is acceptable and system can eventually get back to sane state,
>> this option (set to 0 after boot) would prevent crashing the system for
>> apparently benign CSD hangs of long duration.
> 
> Good point!  How about like the following?
> 

Yes, this looks good.
Just realized that keeping panic_on_ipistall set by default(as suggested earlier
by me) would not follow convention of other similar switches like
hard/softlockup_panic etc. which are 0 by deafault.
So default value of 0 looks better choice for panic_on_ipistall as well.

> 							Thanx, Paul
> 
> ------------------------------------------------------------------------
> 
> commit 6bcf3786291b86f13b3e13d51e998737a8009ec3
> Author: Rik van Riel <riel@surriel.com>
> Date:   Mon Aug 21 16:04:09 2023 -0400
> 
>     smp,csd: Throw an error if a CSD lock is stuck for too long
>     
>     The CSD lock seems to get stuck in 2 "modes". When it gets stuck
>     temporarily, it usually gets released in a few seconds, and sometimes
>     up to one or two minutes.
>     
>     If the CSD lock stays stuck for more than several minutes, it never
>     seems to get unstuck, and gradually more and more things in the system
>     end up also getting stuck.
>     
>     In the latter case, we should just give up, so the system can dump out
>     a little more information about what went wrong, and, with panic_on_oops
>     and a kdump kernel loaded, dump a whole bunch more information about what
>     might have gone wrong.  In addition, there is an smp.panic_on_ipistall
>     kernel boot parameter that by default retains the old behavior, but when
>     set enables the panic after the CSD lock has been stuck for more than
>     five minutes.
>     
>     [ paulmck: Apply Imran Khan feedback. ]
>     
>     Link: https://urldefense.com/v3/__https://lore.kernel.org/lkml/bc7cc8b0-f587-4451-8bcd-0daae627bcc7@paulmck-laptop/__;!!ACWV5N9M2RV99hQ!PDFpjgGTCPjxqCyusua5IZWkvdWEMf51igFDc-yb9cVK9PYr7FpEE1oGpWp09YK4lc15C2taMdcuEOqyH8k$ 
>     Signed-off-by: Rik van Riel <riel@surriel.com>
>     Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
>     Cc: Peter Zijlstra <peterz@infradead.org>
>     Cc: Valentin Schneider <vschneid@redhat.com>
>     Cc: Juergen Gross <jgross@suse.com>
>     Cc: Jonathan Corbet <corbet@lwn.net>
>     Cc: Randy Dunlap <rdunlap@infradead.org>
>
Reviewed-by: Imran Khan <imran.f.khan@oracle.com>

> diff --git a/Documentation/admin-guide/kernel-parameters.txt b/Documentation/admin-guide/kernel-parameters.txt
> index 0a1731a0f0ef..592935267ce2 100644
> --- a/Documentation/admin-guide/kernel-parameters.txt
> +++ b/Documentation/admin-guide/kernel-parameters.txt
> @@ -5858,6 +5858,11 @@
>  			This feature may be more efficiently disabled
>  			using the csdlock_debug- kernel parameter.
>  
> +	smp.panic_on_ipistall= [KNL]
> +			If a csd_lock_timeout extends for more than
> +			five minutes, panic the system.  By default, let
> +			CSD-lock acquisition take as long as they take.
> +
>  	smsc-ircc2.nopnp	[HW] Don't use PNP to discover SMC devices
>  	smsc-ircc2.ircc_cfg=	[HW] Device configuration I/O port
>  	smsc-ircc2.ircc_sir=	[HW] SIR base I/O port
> diff --git a/kernel/smp.c b/kernel/smp.c
> index 8455a53465af..b6a0773a7015 100644
> --- a/kernel/smp.c
> +++ b/kernel/smp.c
> @@ -170,6 +170,8 @@ static DEFINE_PER_CPU(void *, cur_csd_info);
>  
>  static ulong csd_lock_timeout = 5000;  /* CSD lock timeout in milliseconds. */
>  module_param(csd_lock_timeout, ulong, 0444);
> +static bool panic_on_ipistall;
> +module_param(panic_on_ipistall, bool, 0444);
>  
>  static atomic_t csd_bug_count = ATOMIC_INIT(0);
>  
> @@ -230,6 +232,7 @@ static bool csd_lock_wait_toolong(struct __call_single_data *csd, u64 ts0, u64 *
>  	}
>  
>  	ts2 = sched_clock();
> +	/* How long since we last checked for a stuck CSD lock.*/
>  	ts_delta = ts2 - *ts1;
>  	if (likely(ts_delta <= csd_lock_timeout_ns || csd_lock_timeout_ns == 0))
>  		return false;
> @@ -243,9 +246,17 @@ static bool csd_lock_wait_toolong(struct __call_single_data *csd, u64 ts0, u64 *
>  	else
>  		cpux = cpu;
>  	cpu_cur_csd = smp_load_acquire(&per_cpu(cur_csd, cpux)); /* Before func and info. */
> +	/* How long since this CSD lock was stuck. */
> +	ts_delta = ts2 - ts0;
>  	pr_alert("csd: %s non-responsive CSD lock (#%d) on CPU#%d, waiting %llu ns for CPU#%02d %pS(%ps).\n",
> -		 firsttime ? "Detected" : "Continued", *bug_id, raw_smp_processor_id(), ts2 - ts0,
> +		 firsttime ? "Detected" : "Continued", *bug_id, raw_smp_processor_id(), ts_delta,
>  		 cpu, csd->func, csd->info);
> +	/*
> +	 * If the CSD lock is still stuck after 5 minutes, it is unlikely
> +	 * to become unstuck. Use a signed comparison to avoid triggering
> +	 * on underflows when the TSC is out of sync between sockets.
> +	 */
> +	BUG_ON(panic_on_ipistall && (s64)ts_delta > 300000000000LL);
>  	if (cpu_cur_csd && csd != cpu_cur_csd) {
>  		pr_alert("\tcsd: CSD lock (#%d) handling prior %pS(%ps) request.\n",
>  			 *bug_id, READ_ONCE(per_cpu(cur_csd_func, cpux)),

  reply	other threads:[~2023-10-10  4:59 UTC|newest]

Thread overview: 13+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2023-10-05 16:48 Paul E. McKenney
2023-10-05 23:32 ` Imran Khan
2023-10-09 16:39   ` Paul E. McKenney
2023-10-10  4:58     ` Imran Khan [this message]
2023-10-10 13:47       ` Paul E. McKenney
2023-10-13 15:26     ` Leonardo Bras
2023-10-16 18:27       ` Paul E. McKenney
2023-10-16 20:52         ` Leonardo Bras
2023-10-16 20:58           ` Leonardo Bras
2023-10-16 21:37             ` Paul E. McKenney
2023-10-16 22:15               ` Leonardo Bras
2023-10-06 18:48 ` Jonas Oberhauser
2023-10-06 20:26   ` Paul E. McKenney

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=89062478-fa97-c265-3b18-de55eeae3c1f@oracle.com \
    --to=imran.f.khan@oracle.com \
    --cc=jgross@suse.com \
    --cc=leobras@redhat.com \
    --cc=linux-kernel@vger.kernel.org \
    --cc=paulmck@kernel.org \
    --cc=peterz@infradead.org \
    --cc=vschneid@redhat.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox

all inboxes | Powered by JetHome®