Re: [PATCH net 0/2] net: ethernet: qualcomm: ppe: Fix queue access and port validation

[Til Kaiser <mail@tk154.de>]

On 10/16/26 5:09 PM, netdev-bot+sinfo@kernel.org wrote:
> Hi!
> 
> This is an automated message. This series looks like a fix, but its
> commit messages seem to be missing some information:
> 
>  - Whether the issue was actually triggered, or is only theoretical
>    (e.g. found by code inspection). If it was triggered please include
>    the symptoms, like the stack trace or error messages.
> 
>  - What hardware the change was tested on. For driver fixes please
>    mention the device (and if relevant firmware version) used for
>    testing, or say that the change was not tested on real hardware.
> 
> Please do not repost the series just to address the above. Instead,
> reply to this email with the missing information, so that reviewers
> can take it into account. If the series needs another revision for
> other reasons, please include the information in the commit messages
> then.
> 
> The evaluation is done by an LLM so it may be wrong, if you think
> that is the case please reply and explain.

Hi,

The multicast indexing issue was reported by Sashiko. The oversized
bulk access was found during follow-up code inspection. These issues
were identified through review, rather than an observed hardware
failure. The register layout was checked against Qualcomm’s QSDK.

The binding issue was reproduced with compiled example DTBs and
dt-validate. I tested the fixes on the Ubiquiti UniFi 7 Pro XGS
access point (IPQ5332).

Thanks,
Til