From: "Bryan O'Sullivan" <bos@pathscale.com>
To: rdreier@cisco.com
Cc: openib-general@openib.org, linux-kernel@vger.kernel.org
Subject: [PATCH 13 of 13] ipath - tidy up white space in a few files
Date: Mon, 24 Apr 2006 14:23:09 -0700 [thread overview]
Message-ID: <895650567032e5b48153.1145913789@eng-12.pathscale.com> (raw)
In-Reply-To: <patchbomb.1145913776@eng-12.pathscale.com>
Signed-off-by: Bryan O'Sullivan <bos@pathscale.com>
diff -r e3f1bfd7ce46 -r 895650567032 drivers/infiniband/hw/ipath/ipath_debug.h
--- a/drivers/infiniband/hw/ipath/ipath_debug.h Mon Apr 24 14:21:04 2006 -0700
+++ b/drivers/infiniband/hw/ipath/ipath_debug.h Mon Apr 24 14:21:04 2006 -0700
@@ -60,11 +60,11 @@
#define __IPATH_KERNEL_SEND 0x2000 /* use kernel mode send */
#define __IPATH_EPKTDBG 0x4000 /* print ethernet packet data */
#define __IPATH_SMADBG 0x8000 /* sma packet debug */
-#define __IPATH_IPATHDBG 0x10000 /* Ethernet (IPATH) general debug on */
-#define __IPATH_IPATHWARN 0x20000 /* Ethernet (IPATH) warnings on */
-#define __IPATH_IPATHERR 0x40000 /* Ethernet (IPATH) errors on */
-#define __IPATH_IPATHPD 0x80000 /* Ethernet (IPATH) packet dump on */
-#define __IPATH_IPATHTABLE 0x100000 /* Ethernet (IPATH) table dump on */
+#define __IPATH_IPATHDBG 0x10000 /* Ethernet (IPATH) gen debug */
+#define __IPATH_IPATHWARN 0x20000 /* Ethernet (IPATH) warnings */
+#define __IPATH_IPATHERR 0x40000 /* Ethernet (IPATH) errors */
+#define __IPATH_IPATHPD 0x80000 /* Ethernet (IPATH) packet dump */
+#define __IPATH_IPATHTABLE 0x100000 /* Ethernet (IPATH) table dump */
#else /* _IPATH_DEBUGGING */
@@ -79,11 +79,12 @@
#define __IPATH_TRSAMPLE 0x0 /* generate trace buffer sample entries */
#define __IPATH_VERBDBG 0x0 /* very verbose debug */
#define __IPATH_PKTDBG 0x0 /* print packet data */
-#define __IPATH_PROCDBG 0x0 /* print process startup (init)/exit messages */
+#define __IPATH_PROCDBG 0x0 /* process startup (init)/exit messages */
/* print mmap/nopage stuff, not using VDBG any more */
#define __IPATH_MMDBG 0x0
#define __IPATH_EPKTDBG 0x0 /* print ethernet packet data */
-#define __IPATH_SMADBG 0x0 /* print process startup (init)/exit messages */#define __IPATH_IPATHDBG 0x0 /* Ethernet (IPATH) table dump on */
+#define __IPATH_SMADBG 0x0 /* process startup (init)/exit messages */
+#define __IPATH_IPATHDBG 0x0 /* Ethernet (IPATH) table dump on */
#define __IPATH_IPATHWARN 0x0 /* Ethernet (IPATH) warnings on */
#define __IPATH_IPATHERR 0x0 /* Ethernet (IPATH) errors on */
#define __IPATH_IPATHPD 0x0 /* Ethernet (IPATH) packet dump on */
diff -r e3f1bfd7ce46 -r 895650567032 drivers/infiniband/hw/ipath/ipath_registers.h
--- a/drivers/infiniband/hw/ipath/ipath_registers.h Mon Apr 24 14:21:04 2006 -0700
+++ b/drivers/infiniband/hw/ipath/ipath_registers.h Mon Apr 24 14:21:04 2006 -0700
@@ -34,8 +34,9 @@
#define _IPATH_REGISTERS_H
/*
- * This file should only be included by kernel source, and by the diags.
- * It defines the registers, and their contents, for the InfiniPath HT-400 chip
+ * This file should only be included by kernel source, and by the diags. It
+ * defines the registers, and their contents, for the InfiniPath HT-400
+ * chip.
*/
/*
@@ -156,8 +157,10 @@
#define INFINIPATH_IBCC_FLOWCTRLWATERMARK_SHIFT 8
#define INFINIPATH_IBCC_LINKINITCMD_MASK 0x3ULL
#define INFINIPATH_IBCC_LINKINITCMD_DISABLE 1
-#define INFINIPATH_IBCC_LINKINITCMD_POLL 2 /* cycle through TS1/TS2 till OK */
-#define INFINIPATH_IBCC_LINKINITCMD_SLEEP 3 /* wait for TS1, then go on */
+/* cycle through TS1/TS2 till OK */
+#define INFINIPATH_IBCC_LINKINITCMD_POLL 2
+/* wait for TS1, then go on */
+#define INFINIPATH_IBCC_LINKINITCMD_SLEEP 3
#define INFINIPATH_IBCC_LINKINITCMD_SHIFT 16
#define INFINIPATH_IBCC_LINKCMD_MASK 0x3ULL
#define INFINIPATH_IBCC_LINKCMD_INIT 1 /* move to 0x11 */
@@ -182,7 +185,8 @@
#define INFINIPATH_IBCS_LINKSTATE_SHIFT 4
#define INFINIPATH_IBCS_TXREADY 0x40000000
#define INFINIPATH_IBCS_TXCREDITOK 0x80000000
-/* link training states (shift by INFINIPATH_IBCS_LINKTRAININGSTATE_SHIFT) */
+/* link training states (shift by
+ INFINIPATH_IBCS_LINKTRAININGSTATE_SHIFT) */
#define INFINIPATH_IBCS_LT_STATE_DISABLED 0x00
#define INFINIPATH_IBCS_LT_STATE_LINKUP 0x01
#define INFINIPATH_IBCS_LT_STATE_POLLACTIVE 0x02
@@ -267,10 +271,12 @@
/* kr_serdesconfig0 bits */
#define INFINIPATH_SERDC0_RESET_MASK 0xfULL /* overal reset bits */
#define INFINIPATH_SERDC0_RESET_PLL 0x10000000ULL /* pll reset */
-#define INFINIPATH_SERDC0_TXIDLE 0xF000ULL /* tx idle enables (per lane) */
-#define INFINIPATH_SERDC0_RXDETECT_EN 0xF0000ULL /* rx detect enables (per lane) */
-#define INFINIPATH_SERDC0_L1PWR_DN 0xF0ULL /* L1 Power down; use with RXDETECT,
- Otherwise not used on IB side */
+/* tx idle enables (per lane) */
+#define INFINIPATH_SERDC0_TXIDLE 0xF000ULL
+/* rx detect enables (per lane) */
+#define INFINIPATH_SERDC0_RXDETECT_EN 0xF0000ULL
+/* L1 Power down; use with RXDETECT, Otherwise not used on IB side */
+#define INFINIPATH_SERDC0_L1PWR_DN 0xF0ULL
/* kr_xgxsconfig bits */
#define INFINIPATH_XGXS_RESET 0x7ULL
@@ -390,12 +396,13 @@ struct ipath_kregs {
ipath_kreg kr_txintmemsize;
ipath_kreg kr_xgxsconfig;
ipath_kreg kr_ibpllcfg;
- /* use these two (and the following N ports) only with ipath_k*_kreg64_port();
- * not *kreg64() */
+ /* use these two (and the following N ports) only with
+ * ipath_k*_kreg64_port(); not *kreg64() */
ipath_kreg kr_rcvhdraddr;
ipath_kreg kr_rcvhdrtailaddr;
- /* remaining registers are not present on all types of infinipath chips */
+ /* remaining registers are not present on all types of infinipath
+ chips */
ipath_kreg kr_rcvpktledcnt;
ipath_kreg kr_pcierbuftestreg0;
ipath_kreg kr_pcierbuftestreg1;
diff -r e3f1bfd7ce46 -r 895650567032 drivers/infiniband/hw/ipath/ipath_ud.c
--- a/drivers/infiniband/hw/ipath/ipath_ud.c Mon Apr 24 14:21:04 2006 -0700
+++ b/drivers/infiniband/hw/ipath/ipath_ud.c Mon Apr 24 14:21:04 2006 -0700
@@ -46,8 +46,10 @@
* This is called from ipath_post_ud_send() to forward a WQE addressed
* to the same HCA.
*/
-static void ipath_ud_loopback(struct ipath_qp *sqp, struct ipath_sge_state *ss,
- u32 length, struct ib_send_wr *wr, struct ib_wc *wc)
+static void ipath_ud_loopback(struct ipath_qp *sqp,
+ struct ipath_sge_state *ss,
+ u32 length, struct ib_send_wr *wr,
+ struct ib_wc *wc)
{
struct ipath_ibdev *dev = to_idev(sqp->ibqp.device);
struct ipath_qp *qp;
next prev parent reply other threads:[~2006-04-24 21:25 UTC|newest]
Thread overview: 37+ messages / expand[flat|nested] mbox.gz Atom feed top
2006-04-24 21:22 [PATCH 0 of 13] ipath - various fixes and cleanups Bryan O'Sullivan
2006-04-24 21:22 ` [PATCH 1 of 13] ipath - fix race with exposing reset file Bryan O'Sullivan
2006-04-24 21:22 ` [PATCH 2 of 13] ipath - set up 32-bit DMA mask if 64-bit setup fails Bryan O'Sullivan
2006-05-01 18:47 ` Roland Dreier
2006-05-01 19:56 ` Segher Boessenkool
2006-05-01 21:41 ` Roland Dreier
2006-05-01 23:13 ` Segher Boessenkool
2006-05-01 23:27 ` [openib-general] " Roland Dreier
2006-05-02 0:13 ` Segher Boessenkool
2006-05-02 0:18 ` Roland Dreier
2006-04-24 21:22 ` [PATCH 3 of 13] ipath - iterate over correct number of ports during reset Bryan O'Sullivan
2006-04-24 21:23 ` [PATCH 4 of 13] ipath - change handling of PIO buffers Bryan O'Sullivan
2006-04-25 9:32 ` Segher Boessenkool
2006-04-24 21:23 ` [PATCH 5 of 13] ipath - use proper address translation routine Bryan O'Sullivan
2006-05-01 18:50 ` Roland Dreier
2006-05-01 18:54 ` Arjan van de Ven
2006-05-01 19:00 ` Roland Dreier
2006-05-01 19:20 ` Arjan van de Ven
2006-05-01 19:28 ` Roland Dreier
2006-05-02 13:35 ` Christoph Hellwig
2006-05-02 14:24 ` Roland Dreier
2006-05-02 14:27 ` Christoph Hellwig
2006-05-02 14:55 ` Alan Cox
2006-05-02 14:58 ` Roland Dreier
2006-05-01 19:03 ` Bryan O'Sullivan
2006-04-24 21:23 ` [PATCH 6 of 13] ipath - fix verbs registration Bryan O'Sullivan
2006-04-24 21:23 ` [PATCH 7 of 13] ipath - prevent hardware from being accessed during reset Bryan O'Sullivan
2006-04-24 21:23 ` [PATCH 8 of 13] ipath - fix a number of RC protocol bugs Bryan O'Sullivan
2006-04-25 7:56 ` Andrew Morton
2006-05-01 17:22 ` Roland Dreier
2006-05-01 17:34 ` Bryan O'Sullivan
2006-04-24 21:23 ` [PATCH 9 of 13] ipath - simplify RC send posting Bryan O'Sullivan
2006-04-24 21:23 ` [PATCH 10 of 13] ipath - simplify IB timer usage Bryan O'Sullivan
2006-04-24 21:23 ` [PATCH 11 of 13] ipath - improve sparse annotation Bryan O'Sullivan
2006-04-24 21:23 ` [PATCH 12 of 13] ipath - fix label name in interrupt handler Bryan O'Sullivan
2006-04-24 21:23 ` Bryan O'Sullivan [this message]
2006-05-01 19:17 ` [PATCH 13 of 13] ipath - tidy up white space in a few files Roland Dreier
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=895650567032e5b48153.1145913789@eng-12.pathscale.com \
--to=bos@pathscale.com \
--cc=linux-kernel@vger.kernel.org \
--cc=openib-general@openib.org \
--cc=rdreier@cisco.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox
all inboxes | Powered by JetHome®