Re: [PATCH v2 1/7] media: camss: ispif: Correctly reset based on the VFE ID

[Vladimir Zapolskiy <vladimir.zapolskiy@linaro.org>]

On 10/22/20 20:47, kholk11@gmail.com wrote:
> From: AngeloGioacchino Del Regno <kholk11@gmail.com>
> 
> Resetting the ISPIF VFE0 context is wrong if we are using the VFE1
> for dual-camera or simply because a secondary camera is connected
> to it: in this case the reset will always happen on the VFE0 ctx
> of the ISPIF, which is .. useless.
> 
> Fix this usecase by adding the ISPIF_RST_CMD_1 address and choose
> where to do the (or what to) reset based on the VFE line id.
> 
> Signed-off-by: AngeloGioacchino Del Regno <kholk11@gmail.com>
> Reviewed-by: Robert Foss <robert.foss@linaro.org>
> ---
>   .../media/platform/qcom/camss/camss-ispif.c   | 85 ++++++++++++-------
>   .../media/platform/qcom/camss/camss-ispif.h   |  2 +-
>   2 files changed, 56 insertions(+), 31 deletions(-)
> 
> diff --git a/drivers/media/platform/qcom/camss/camss-ispif.c b/drivers/media/platform/qcom/camss/camss-ispif.c
> index db94cfd6c508..754f0d044c38 100644
> --- a/drivers/media/platform/qcom/camss/camss-ispif.c
> +++ b/drivers/media/platform/qcom/camss/camss-ispif.c
> @@ -26,6 +26,7 @@
>   #define MSM_ISPIF_NAME "msm_ispif"
>   
>   #define ISPIF_RST_CMD_0			0x008
> +#define ISPIF_RST_CMD_1			0x00c
>   #define ISPIF_RST_CMD_0_STROBED_RST_EN		(1 << 0)
>   #define ISPIF_RST_CMD_0_MISC_LOGIC_RST		(1 << 1)
>   #define ISPIF_RST_CMD_0_SW_REG_RST		(1 << 2)
> @@ -179,7 +180,10 @@ static irqreturn_t ispif_isr_8x96(int irq, void *dev)
>   	writel(0x1, ispif->base + ISPIF_IRQ_GLOBAL_CLEAR_CMD);
>   
>   	if ((value0 >> 27) & 0x1)
> -		complete(&ispif->reset_complete);
> +		complete(&ispif->reset_complete[0]);
> +
> +	if ((value3 >> 27) & 0x1)
> +		complete(&ispif->reset_complete[1]);
>   
>   	if (unlikely(value0 & ISPIF_VFE_m_IRQ_STATUS_0_PIX0_OVERFLOW))
>   		dev_err_ratelimited(to_device(ispif), "VFE0 pix0 overflow\n");
> @@ -237,7 +241,7 @@ static irqreturn_t ispif_isr_8x16(int irq, void *dev)
>   	writel(0x1, ispif->base + ISPIF_IRQ_GLOBAL_CLEAR_CMD);
>   
>   	if ((value0 >> 27) & 0x1)
> -		complete(&ispif->reset_complete);
> +		complete(&ispif->reset_complete[0]);
>   
>   	if (unlikely(value0 & ISPIF_VFE_m_IRQ_STATUS_0_PIX0_OVERFLOW))
>   		dev_err_ratelimited(to_device(ispif), "VFE0 pix0 overflow\n");
> @@ -257,33 +261,18 @@ static irqreturn_t ispif_isr_8x16(int irq, void *dev)
>   	return IRQ_HANDLED;
>   }
>   
> -/*
> - * ispif_reset - Trigger reset on ISPIF module and wait to complete
> - * @ispif: ISPIF device
> - *
> - * Return 0 on success or a negative error code otherwise
> - */
> -static int ispif_reset(struct ispif_device *ispif)
> +static int ispif_vfe_reset(struct ispif_device *ispif, u8 vfe_id)
>   {
>   	unsigned long time;
>   	u32 val;
> -	int ret;
> -
> -	ret = camss_pm_domain_on(to_camss(ispif), PM_DOMAIN_VFE0);
> -	if (ret < 0)
> -		return ret;
>   
> -	ret = camss_pm_domain_on(to_camss(ispif), PM_DOMAIN_VFE1);
> -	if (ret < 0)
> -		return ret;
> -
> -	ret = camss_enable_clocks(ispif->nclocks_for_reset,
> -				  ispif->clock_for_reset,
> -				  to_device(ispif));
> -	if (ret < 0)
> -		return ret;
> +	if (vfe_id > (to_camss(ispif)->vfe_num - 1)) {
> +		dev_err(to_device(ispif),
> +			"Error: asked reset for invalid VFE%d\n", vfe_id);
> +		return -ENOENT;
> +	}

I was stumbled upon this "vfe_num" usage, which seems unnecessary...

>   
> -	reinit_completion(&ispif->reset_complete);
> +	reinit_completion(&ispif->reset_complete[vfe_id]);
>   
>   	val = ISPIF_RST_CMD_0_STROBED_RST_EN |
>   		ISPIF_RST_CMD_0_MISC_LOGIC_RST |
> @@ -303,15 +292,50 @@ static int ispif_reset(struct ispif_device *ispif)
>   		ISPIF_RST_CMD_0_RDI_OUTPUT_1_MISR_RST |
>   		ISPIF_RST_CMD_0_RDI_OUTPUT_2_MISR_RST;
>   
> -	writel_relaxed(val, ispif->base + ISPIF_RST_CMD_0);
> +	if (vfe_id == 1)
> +		writel_relaxed(val, ispif->base + ISPIF_RST_CMD_1);
> +	else
> +		writel_relaxed(val, ispif->base + ISPIF_RST_CMD_0);
>   
> -	time = wait_for_completion_timeout(&ispif->reset_complete,
> +	time = wait_for_completion_timeout(&ispif->reset_complete[vfe_id],
>   		msecs_to_jiffies(ISPIF_RESET_TIMEOUT_MS));
>   	if (!time) {
> -		dev_err(to_device(ispif), "ISPIF reset timeout\n");
> -		ret = -EIO;
> +		dev_err(to_device(ispif),
> +			"ISPIF for VFE%d reset timeout\n", vfe_id);
> +		return -EIO;
>   	}
>   
> +	return 0;
> +}
> +
> +/*
> + * ispif_reset - Trigger reset on ISPIF module and wait to complete
> + * @ispif: ISPIF device
> + *
> + * Return 0 on success or a negative error code otherwise
> + */
> +static int ispif_reset(struct ispif_device *ispif, u8 vfe_id)
> +{
> +	int ret;
> +
> +	ret = camss_pm_domain_on(to_camss(ispif), PM_DOMAIN_VFE0);
> +	if (ret < 0)
> +		return ret;
> +
> +	ret = camss_pm_domain_on(to_camss(ispif), PM_DOMAIN_VFE1);
> +	if (ret < 0)
> +		return ret;
> +
> +	ret = camss_enable_clocks(ispif->nclocks_for_reset,
> +				  ispif->clock_for_reset,
> +				  to_device(ispif));
> +	if (ret < 0)
> +		return ret;
> +
> +	ret = ispif_vfe_reset(ispif, vfe_id);
> +	if (ret)
> +		dev_dbg(to_device(ispif), "ISPIF Reset failed\n");
> +
>   	camss_disable_clocks(ispif->nclocks_for_reset, ispif->clock_for_reset);
>   
>   	camss_pm_domain_off(to_camss(ispif), PM_DOMAIN_VFE0);
> @@ -355,7 +379,7 @@ static int ispif_set_power(struct v4l2_subdev *sd, int on)
>   			goto exit;
>   		}
>   
> -		ret = ispif_reset(ispif);
> +		ret = ispif_reset(ispif, line->vfe_id);

But in fact here is an error.

line->vfe_id is never set.

I'm unable to test any fix, since I don't have a correspondent hardware,
but I can write a fix for someone's testing.

--
Best wishes,
Vladimir