From: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
To: "Krzysztof Kozlowski" <krzysztof.kozlowski@linaro.org>,
"James Schulman" <james.schulman@cirrus.com>,
"David Rhodes" <david.rhodes@cirrus.com>,
"Richard Fitzgerald" <rf@opensource.cirrus.com>,
"Jaroslav Kysela" <perex@perex.cz>,
"Takashi Iwai" <tiwai@suse.com>,
"Liam Girdwood" <lgirdwood@gmail.com>,
"Mark Brown" <broonie@kernel.org>,
"Lars-Peter Clausen" <lars@metafoo.de>,
"Nuno Sá" <nuno.sa@analog.com>,
"Banajit Goswami" <bgoswami@quicinc.com>
Cc: alsa-devel@alsa-project.org, patches@opensource.cirrus.com,
linux-sound@vger.kernel.org, linux-kernel@vger.kernel.org
Subject: Re: [PATCH 2/4] ASoC: qcom: q6dsp: Implement proper channel mapping in Audioreach
Date: Tue, 7 May 2024 14:25:31 +0100 [thread overview]
Message-ID: <89cf75d8-1f85-43d8-9c33-377a04b36121@linaro.org> (raw)
In-Reply-To: <20240507-asoc-x1e80100-4-channel-mapping-v1-2-b12c13e0a55d@linaro.org>
On 07/05/2024 11:27, Krzysztof Kozlowski wrote:
> Instead of relying on default channel mapping in all Audioreach
> platforms, implement set_channel_map() callback to allow sound cards
> customize the mapping depending on needs.
>
> The channel mapping is set on frontend DAIs coming from the topology,
> not DTS, thus need to add DAI ops in topology dai_load() callback.
>
> Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
> ---
> sound/soc/qcom/qdsp6/audioreach.c | 2 +-
> sound/soc/qcom/qdsp6/audioreach.h | 1 +
> sound/soc/qcom/qdsp6/q6apm.c | 28 +++++++++++++++++++++++++++-
> sound/soc/qcom/qdsp6/q6apm.h | 8 ++++++++
> sound/soc/qcom/qdsp6/topology.c | 12 ++++++++++++
> 5 files changed, 49 insertions(+), 2 deletions(-)
Please use the existing q6dma_set_channel_map() and set the channel map
for the backend dai from machine driver, this should work.
setting channels on FE is not a scalable one.
Please take a look at some of the patches that I shared privately.
--srini
>
> diff --git a/sound/soc/qcom/qdsp6/audioreach.c b/sound/soc/qcom/qdsp6/audioreach.c
> index c655f0213723..8175678d8843 100644
> --- a/sound/soc/qcom/qdsp6/audioreach.c
> +++ b/sound/soc/qcom/qdsp6/audioreach.c
> @@ -267,7 +267,7 @@ void *audioreach_alloc_apm_cmd_pkt(int pkt_size, uint32_t opcode, uint32_t token
> }
> EXPORT_SYMBOL_GPL(audioreach_alloc_apm_cmd_pkt);
>
> -static void audioreach_set_channel_mapping(u8 *ch_map, int num_channels)
> +void audioreach_set_channel_mapping(u8 *ch_map, int num_channels)
> {
> if (num_channels == 1) {
> ch_map[0] = PCM_CHANNEL_FL;
> diff --git a/sound/soc/qcom/qdsp6/audioreach.h b/sound/soc/qcom/qdsp6/audioreach.h
> index 2c82917b7162..cef9a9015dcc 100644
> --- a/sound/soc/qcom/qdsp6/audioreach.h
> +++ b/sound/soc/qcom/qdsp6/audioreach.h
> @@ -767,6 +767,7 @@ struct audioreach_module_config {
> /* Packet Allocation routines */
> void *audioreach_alloc_apm_cmd_pkt(int pkt_size, uint32_t opcode, uint32_t
> token);
> +void audioreach_set_channel_mapping(u8 *ch_map, int num_channels);
> void *audioreach_alloc_cmd_pkt(int payload_size, uint32_t opcode,
> uint32_t token, uint32_t src_port,
> uint32_t dest_port);
> diff --git a/sound/soc/qcom/qdsp6/q6apm.c b/sound/soc/qcom/qdsp6/q6apm.c
> index 2a2a5bd98110..c29a2dd36992 100644
> --- a/sound/soc/qcom/qdsp6/q6apm.c
> +++ b/sound/soc/qcom/qdsp6/q6apm.c
> @@ -13,6 +13,7 @@
> #include <linux/soc/qcom/apr.h>
> #include <linux/wait.h>
> #include <sound/soc.h>
> +#include <sound/soc-dai.h>
> #include <sound/soc-dapm.h>
> #include <sound/pcm.h>
> #include "audioreach.h"
> @@ -29,6 +30,29 @@ struct apm_graph_mgmt_cmd {
>
> static struct q6apm *g_apm;
>
> +static int q6apm_dai_set_channel_map(struct snd_soc_dai *dai,
> + unsigned int tx_num,
> + const unsigned int *tx_ch_mask,
> + unsigned int rx_num,
> + const unsigned int *rx_ch_mask)
> +{
> + struct q6apm *apm = dev_get_drvdata(dai->dev);
> + int i;
> +
> + if (dai->id >= ARRAY_SIZE(apm->dai_config))
> + return -EINVAL;
> +
> + apm->dai_config[dai->id].num_channels = rx_num;
> + for (i = 0; i < rx_num; i++)
> + apm->dai_config[dai->id].channel_map[i] = rx_ch_mask[i];
> +
> + return 0;
> +}
> +
> +const struct snd_soc_dai_ops q6apm_dai_ops = {
> + .set_channel_map = q6apm_dai_set_channel_map,
> +};
> +
> int q6apm_send_cmd_sync(struct q6apm *apm, struct gpr_pkt *pkt, uint32_t rsp_opcode)
> {
> gpr_device_t *gdev = apm->gdev;
> @@ -722,7 +746,7 @@ static int apm_probe(gpr_device_t *gdev)
> {
> struct device *dev = &gdev->dev;
> struct q6apm *apm;
> - int ret;
> + int ret, i;
>
> apm = devm_kzalloc(dev, sizeof(*apm), GFP_KERNEL);
> if (!apm)
> @@ -733,6 +757,8 @@ static int apm_probe(gpr_device_t *gdev)
> mutex_init(&apm->lock);
> apm->dev = dev;
> apm->gdev = gdev;
> + for (i = 0; i < ARRAY_SIZE(apm->dai_config); i++)
> + audioreach_set_channel_mapping(apm->dai_config[i].channel_map, 4);
> init_waitqueue_head(&apm->wait);
>
> INIT_LIST_HEAD(&apm->widget_list);
> diff --git a/sound/soc/qcom/qdsp6/q6apm.h b/sound/soc/qcom/qdsp6/q6apm.h
> index c248c8d2b1ab..0e2e7b6cd6c1 100644
> --- a/sound/soc/qcom/qdsp6/q6apm.h
> +++ b/sound/soc/qcom/qdsp6/q6apm.h
> @@ -47,6 +47,11 @@
> #define APM_LAST_BUFFER_FLAG BIT(30)
> #define NO_TIMESTAMP 0xFF00
>
> +struct q6apm_dai_config {
> + unsigned int num_channels;
> + u8 channel_map[AR_PCM_MAX_NUM_CHANNEL];
> +};
> +
> struct q6apm {
> struct device *dev;
> gpr_port_t *port;
> @@ -65,6 +70,7 @@ struct q6apm {
> struct idr sub_graphs_idr;
> struct idr containers_idr;
> struct idr modules_idr;
> + struct q6apm_dai_config dai_config[4];
> };
>
> struct audio_buffer {
> @@ -108,6 +114,8 @@ struct q6apm_graph {
> struct audioreach_graph_info *info;
> };
>
> +extern const struct snd_soc_dai_ops q6apm_dai_ops;
> +
> /* Graph Operations */
> struct q6apm_graph *q6apm_graph_open(struct device *dev, q6apm_cb cb,
> void *priv, int graph_id);
> diff --git a/sound/soc/qcom/qdsp6/topology.c b/sound/soc/qcom/qdsp6/topology.c
> index 70572c83e101..9708d200568d 100644
> --- a/sound/soc/qcom/qdsp6/topology.c
> +++ b/sound/soc/qcom/qdsp6/topology.c
> @@ -1034,6 +1034,17 @@ static int audioreach_tplg_complete(struct snd_soc_component *component)
> return 0;
> }
>
> +static int audioreach_dai_load(struct snd_soc_component *cmp, int index,
> + struct snd_soc_dai_driver *dai_drv,
> + struct snd_soc_tplg_pcm *pcm,
> + struct snd_soc_dai *dai)
> +{
> + if (pcm)
> + dai_drv->ops = &q6apm_dai_ops;
> +
> + return 0;
> +}
> +
> /* DAI link - used for any driver specific init */
> static int audioreach_link_load(struct snd_soc_component *component, int index,
> struct snd_soc_dai_link *link,
> @@ -1251,6 +1262,7 @@ static struct snd_soc_tplg_ops audioreach_tplg_ops = {
> .widget_unload = audioreach_widget_unload,
>
> .complete = audioreach_tplg_complete,
> + .dai_load = audioreach_dai_load,
> .link_load = audioreach_link_load,
>
> .dapm_route_load = audioreach_route_load,
>
next prev parent reply other threads:[~2024-05-07 13:25 UTC|newest]
Thread overview: 10+ messages / expand[flat|nested] mbox.gz Atom feed top
2024-05-07 10:27 [PATCH 0/4] ASoC: qcom: x1e80100: Correct channel mapping Krzysztof Kozlowski
2024-05-07 10:27 ` [PATCH 1/4] ASoC: Constify channel mapping array arguments in set_channel_map() Krzysztof Kozlowski
2024-05-07 11:57 ` Charles Keepax
2024-05-07 10:27 ` [PATCH 2/4] ASoC: qcom: q6dsp: Implement proper channel mapping in Audioreach Krzysztof Kozlowski
2024-05-07 13:25 ` Srinivas Kandagatla [this message]
2024-05-07 18:16 ` Krzysztof Kozlowski
2024-05-07 10:27 ` [PATCH 3/4] ASoC: qcom: q6dsp: Set channel mapping instead of fixed defaults Krzysztof Kozlowski
2024-05-07 10:27 ` [PATCH 4/4] ASoC: qcom: x1e80100: Correct channel mapping Krzysztof Kozlowski
2024-05-07 13:20 ` Srinivas Kandagatla
2024-05-07 18:15 ` Krzysztof Kozlowski
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=89cf75d8-1f85-43d8-9c33-377a04b36121@linaro.org \
--to=srinivas.kandagatla@linaro.org \
--cc=alsa-devel@alsa-project.org \
--cc=bgoswami@quicinc.com \
--cc=broonie@kernel.org \
--cc=david.rhodes@cirrus.com \
--cc=james.schulman@cirrus.com \
--cc=krzysztof.kozlowski@linaro.org \
--cc=lars@metafoo.de \
--cc=lgirdwood@gmail.com \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-sound@vger.kernel.org \
--cc=nuno.sa@analog.com \
--cc=patches@opensource.cirrus.com \
--cc=perex@perex.cz \
--cc=rf@opensource.cirrus.com \
--cc=tiwai@suse.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox
all inboxes | Powered by JetHome®