Re: [PATCH 1/5] PCI: Reject negative resource alignment order

["Ilpo Järvinen" <ilpo.jarvinen@linux.intel.com>]

On Sat, 7 Nov 2026, shao.mingyin@zte.com.cn wrote:

> From: Shao Mingyin <shao.mingyin@zte.com.cn>
> 
> pci_specified_resource_alignment() parses the pci=resource_alignment=
> boot parameter with sscanf("%d%n", &align_order, ...) and rejects only
> orders above 63.  A negative order, e.g. "pci=resource_alignment=-5@...",
> passes that check and later reaches "align = 1ULL << align_order" with a
> negative shift count, which is undefined behavior; on x86 the 64-bit
> shift count is masked to six bits, silently producing a 2^59-byte
> alignment that mis-aligns (or fails to align) the affected IOV resources.
> 
> Reject any order outside the valid [0, 63] range and fall back to the
> default page-size alignment, matching the existing handling of
> out-of-range positive orders.
> 
> Fixes: 6534aac198b5 ("PCI: Bounds-check command-line resource alignment requests")
> Cc: stable@vger.kernel.org
> Signed-off-by: Shao Mingyin <shao.mingyin@zte.com.cn>
> ---
> Tested on 7.3.0-next-20261030 (QEMU/TCG guest) with the
> pci=resource_alignment= boot parameter and a QEMU e1000 NIC; no extra
> hardware is needed.
> 
> Booting with pci=resource_alignment=-5@pci:8086:100e parses a negative
> order that the "> 63" check lets through, so "align = 1ULL << align_order"
> shifts by -5 (masked to 2^59 on x86-64); the e1000 BAR is resized to
> 2^59 bytes, which cannot be assigned, and the e1000 fails to probe:
> 
>   unpatched                            patched
>   requesting alignment to              PCI: Invalid requested alignment
>   0x800000000000000                    (order -5)
>   e1000 probe failed, no eth0          e1000 eth0 probes
> 
> diff --git a/drivers/pci/pci.c b/drivers/pci/pci.c
> index bca3a5d84cd9..c2260ee1f956 100644
> --- a/drivers/pci/pci.c
> +++ b/drivers/pci/pci.c
> @@ -6605,7 +6605,7 @@ static resource_size_t pci_specified_resource_alignment(struct pci_dev *dev,
>  		if (sscanf(p, "%d%n", &align_order, &count) == 1 &&
>  		    p[count] == '@') {
>  			p += count + 1;
> -			if (align_order > 63) {
> +			if (align_order < 0 || align_order > 63) {

Wouldn't it be better to use %u ?

>  				pr_err("PCI: Invalid requested alignment (order %d)\n",
>  				       align_order);
>  				align_order = PAGE_SHIFT;
> 

-- 
 i.