Re: [PATCH] platform/x86: thinkpad_acpi: Fix lkp-tests warnings for platform profiles

[Hans de Goede <hdegoede@redhat.com>]

Hi,

On 6/6/23 17:18, Mark Pearson wrote:
> Fix issues identified in dytc_profile_refresh identified by lkp-tests.
> drivers/platform/x86/thinkpad_acpi.c:10538
> 	dytc_profile_refresh() error: uninitialized symbol 'funcmode'.
> drivers/platform/x86/thinkpad_acpi.c:10531
> 	dytc_profile_refresh() error: uninitialized symbol 'output'.
> drivers/platform/x86/thinkpad_acpi.c:10537
> 	dytc_profile_refresh() error: uninitialized symbol 'output'.
> 
> These issues should not lead to real problems in the field as the refresh
> function should only be called if MMC or PSC mode enabled. But good to fix.
> 
> Thanks to Dan Carpenter and the lkp-tests project for flagging these.
> 
> Reported-by: kernel test robot <lkp@intel.com>
> Reported-by: Dan Carpenter <error27@gmail.com>
> Closes: https://lore.kernel.org/r/202306011202.1hbgLRD4-lkp@intel.com/
> Fixes: 1bc5d819f0b9 ("platform/x86: thinkpad_acpi: Fix profile modes on Intel platforms")
> Signed-off-by: Mark Pearson <mpearson-lenovo@squebb.ca>

Thank you for your patch, I've applied this patch to my review-hans 
branch:
https://git.kernel.org/pub/scm/linux/kernel/git/pdx86/platform-drivers-x86.git/log/?h=review-hans

Note it will show up in my review-hans branch once I've pushed my
local branch there, which might take a while.

Once I've run some tests on this branch the patches there will be
added to the platform-drivers-x86/for-next branch and eventually
will be included in the pdx86 pull-request to Linus for the next
merge-window.

Regards,

Hans




> ---
>  drivers/platform/x86/thinkpad_acpi.c | 4 +++-
>  1 file changed, 3 insertions(+), 1 deletion(-)
> 
> diff --git a/drivers/platform/x86/thinkpad_acpi.c b/drivers/platform/x86/thinkpad_acpi.c
> index b3808ad77278..4b89f42de723 100644
> --- a/drivers/platform/x86/thinkpad_acpi.c
> +++ b/drivers/platform/x86/thinkpad_acpi.c
> @@ -10524,7 +10524,7 @@ static int dytc_profile_set(struct platform_profile_handler *pprof,
>  static void dytc_profile_refresh(void)
>  {
>  	enum platform_profile_option profile;
> -	int output, err = 0;
> +	int output = 0, err = 0;
>  	int perfmode, funcmode;
>  
>  	mutex_lock(&dytc_mutex);
> @@ -10538,6 +10538,8 @@ static void dytc_profile_refresh(void)
>  		err = dytc_command(DYTC_CMD_GET, &output);
>  		/* Check if we are PSC mode, or have AMT enabled */
>  		funcmode = (output >> DYTC_GET_FUNCTION_BIT) & 0xF;
> +	} else { /* Unknown profile mode */
> +		err = -ENODEV;
>  	}
>  	mutex_unlock(&dytc_mutex);
>  	if (err)