RE: aic7xxx (and sym53c8xx) plans

[Nathan Black <NBlack@md.aacisd.com>]

I must say, after I saw this post, I tried out the latest driver for my own
purposes. 

This really improved the performance of my dual PIII-866 w/512MB Ram and
AIC7899 scsi.
I have a couple of cheetah drives that I am writing data that I get off of
an ATM card.(about 12-14 MB/sec rate).

This has significantly lowered the number of dropped packets on the ATM
read. 

I would suggest, if at all possible, putting this in the 2.4.2 kernel.

Nathan

-----Original Message-----
From: Chip Salzenberg [mailto:chip@valinux.com]
Sent: Wednesday, February 14, 2001 9:20 PM
To: Matthew Jacob
Cc: Wakko Warner; Alan Cox; J . A . Magallon; linux-kernel
Subject: Re: aic7xxx (and sym53c8xx) plans


According to Matthew Jacob:
> See http://www.freebsd.org/~gibbs/linux.

Here at VA we're already using Jason's driver -- it works on the Intel
STL2 motherboard, while Doug's driver doesn't (or didn't, a month ago).

While we're discussing SCSI drivers, I'd also like to put in a good
word for the Sym-2 Symbios/NCR drivers from Gerard Roudier:

    ftp://ftp.tux.org/roudier/drivers/portable/sym-2.1.x/

Joe-Bob says: "Check it out."
-- 
Chip Salzenberg            - a.k.a. -            <chip@valinux.com>
   "Give me immortality, or give me death!"  // Firesign Theatre
-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/