From: Paul Cercueil <paul@crapouillou.net>
To: 周琰杰 <zhouyanjie@wanyeetech.com>
Cc: daniel.lezcano@linaro.org, tglx@linutronix.de,
linux-mips@vger.kernel.org, linux-kernel@vger.kernel.org,
dongsheng.qiu@ingenic.com, aric.pzqi@ingenic.com,
rick.tyliu@ingenic.com, sihui.liu@ingenic.com,
jun.jiang@ingenic.com, sernia.zhou@foxmail.com
Subject: Re: [PATCH v2] clocksource: Ingenic: Improve the code.
Date: Fri, 30 Jul 2021 20:00:08 +0100 [thread overview]
Message-ID: <8GN2XQ.MOCZ4R16ZTRH1@crapouillou.net> (raw)
In-Reply-To: <1627638188-116163-1-git-send-email-zhouyanjie@wanyeetech.com>
Hi,
Le ven., juil. 30 2021 at 17:43:08 +0800, 周琰杰 (Zhou Yanjie)
<zhouyanjie@wanyeetech.com> a écrit :
> Use "FIELD_GET()" and "FIELD_PREP()" to simplify the code.
>
> Signed-off-by: 周琰杰 (Zhou Yanjie) <zhouyanjie@wanyeetech.com>
Reviewed-by: Paul Cercueil <paul@crapouillou.net>
Thanks!
-Paul
> ---
>
> Notes:
> v1->v2:
> Split "val = (val & ~OSTCCR_PRESCALEx_MASK) |
> FIELD_PREP(OSTCCR_PRESCALEx_MASK, prescale)"
> into "val &= ~OSTCCR_PRESCALEx_MASK" and "val |=
> FIELD_PREP(OSTCCR_PRESCALEx_MASK, prescale)"
> as Paul Cercueil's suggestion.
>
> drivers/clocksource/ingenic-sysost.c | 13 +++++++------
> 1 file changed, 7 insertions(+), 6 deletions(-)
>
> diff --git a/drivers/clocksource/ingenic-sysost.c
> b/drivers/clocksource/ingenic-sysost.c
> index a129840..cb6fc2f 100644
> --- a/drivers/clocksource/ingenic-sysost.c
> +++ b/drivers/clocksource/ingenic-sysost.c
> @@ -4,6 +4,7 @@
> * Copyright (c) 2020 周琰杰 (Zhou Yanjie)
> <zhouyanjie@wanyeetech.com>
> */
>
> +#include <linux/bitfield.h>
> #include <linux/bitops.h>
> #include <linux/clk.h>
> #include <linux/clk-provider.h>
> @@ -34,8 +35,6 @@
> /* bits within the OSTCCR register */
> #define OSTCCR_PRESCALE1_MASK 0x3
> #define OSTCCR_PRESCALE2_MASK 0xc
> -#define OSTCCR_PRESCALE1_LSB 0
> -#define OSTCCR_PRESCALE2_LSB 2
>
> /* bits within the OSTCR register */
> #define OSTCR_OST1CLR BIT(0)
> @@ -98,7 +97,7 @@ static unsigned long
> ingenic_ost_percpu_timer_recalc_rate(struct clk_hw *hw,
>
> prescale = readl(ost_clk->ost->base + info->ostccr_reg);
>
> - prescale = (prescale & OSTCCR_PRESCALE1_MASK) >>
> OSTCCR_PRESCALE1_LSB;
> + prescale = FIELD_GET(OSTCCR_PRESCALE1_MASK, prescale);
>
> return parent_rate >> (prescale * 2);
> }
> @@ -112,7 +111,7 @@ static unsigned long
> ingenic_ost_global_timer_recalc_rate(struct clk_hw *hw,
>
> prescale = readl(ost_clk->ost->base + info->ostccr_reg);
>
> - prescale = (prescale & OSTCCR_PRESCALE2_MASK) >>
> OSTCCR_PRESCALE2_LSB;
> + prescale = FIELD_GET(OSTCCR_PRESCALE2_MASK, prescale);
>
> return parent_rate >> (prescale * 2);
> }
> @@ -151,7 +150,8 @@ static int
> ingenic_ost_percpu_timer_set_rate(struct clk_hw *hw, unsigned long re
> int val;
>
> val = readl(ost_clk->ost->base + info->ostccr_reg);
> - val = (val & ~OSTCCR_PRESCALE1_MASK) | (prescale <<
> OSTCCR_PRESCALE1_LSB);
> + val &= ~OSTCCR_PRESCALE1_MASK;
> + val |= FIELD_PREP(OSTCCR_PRESCALE1_MASK, prescale);
> writel(val, ost_clk->ost->base + info->ostccr_reg);
>
> return 0;
> @@ -166,7 +166,8 @@ static int
> ingenic_ost_global_timer_set_rate(struct clk_hw *hw, unsigned long re
> int val;
>
> val = readl(ost_clk->ost->base + info->ostccr_reg);
> - val = (val & ~OSTCCR_PRESCALE2_MASK) | (prescale <<
> OSTCCR_PRESCALE2_LSB);
> + val &= ~OSTCCR_PRESCALE2_MASK;
> + val |= FIELD_PREP(OSTCCR_PRESCALE2_MASK, prescale);
> writel(val, ost_clk->ost->base + info->ostccr_reg);
>
> return 0;
> --
> 2.7.4
>
next prev parent reply other threads:[~2021-07-30 19:00 UTC|newest]
Thread overview: 3+ messages / expand[flat|nested] mbox.gz Atom feed top
2021-07-30 9:43 周琰杰 (Zhou Yanjie)
2021-07-30 19:00 ` Paul Cercueil [this message]
2021-08-26 16:25 ` [tip: timers/core] clocksource/drivers/ingenic: Use bitfield macro helpers tip-bot2 for 周琰杰
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=8GN2XQ.MOCZ4R16ZTRH1@crapouillou.net \
--to=paul@crapouillou.net \
--cc=aric.pzqi@ingenic.com \
--cc=daniel.lezcano@linaro.org \
--cc=dongsheng.qiu@ingenic.com \
--cc=jun.jiang@ingenic.com \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-mips@vger.kernel.org \
--cc=rick.tyliu@ingenic.com \
--cc=sernia.zhou@foxmail.com \
--cc=sihui.liu@ingenic.com \
--cc=tglx@linutronix.de \
--cc=zhouyanjie@wanyeetech.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox
all inboxes | Powered by JetHome®