From: Joseph Qi <joseph.qi@linux.alibaba.com>
To: Heming Zhao <heming.zhao@suse.com>,
mark@fasheh.com, jlbec@evilplan.org,
akpm <akpm@linux-foundation.org>
Cc: ocfs2-devel@lists.linux.dev, linux-kernel@vger.kernel.org,
glass.su@suse.com
Subject: Re: [PATCH v6 2/2] ocfs2: detect released suballocator BG for fh_to_[dentry|parent]
Date: Fri, 12 Dec 2025 15:59:19 +0800 [thread overview]
Message-ID: <8aa6a061-0441-43db-84d7-2cc19b269193@linux.alibaba.com> (raw)
In-Reply-To: <20251212074505.25962-3-heming.zhao@suse.com>
On 2025/12/12 15:45, Heming Zhao wrote:
> After ocfs2 gained the ability to reclaim suballocator free block
> group (BGs), a suballocator block group may be released. This change
> causes the xfstest case generic/426 to fail.
>
> generic/426 expects return value -ENOENT or -ESTALE, but the current
> code triggers -EROFS.
>
> Call stack before ocfs2 gained the ability to reclaim bg:
>
> ocfs2_fh_to_dentry //or ocfs2_fh_to_parent
> ocfs2_get_dentry
> + ocfs2_test_inode_bit
> | ocfs2_test_suballoc_bit
> | + ocfs2_read_group_descriptor //Since ocfs2 never releases the bg,
> | | //the bg block was always found.
> | + *res = ocfs2_test_bit //unlink was called, and the bit is zero
> |
> + if (!set) //because the above *res is 0
> status = -ESTALE //the generic/426 expected return value
>
> Current call stack that triggers -EROFS:
>
> ocfs2_get_dentry
> ocfs2_test_inode_bit
> ocfs2_test_suballoc_bit
> ocfs2_read_group_descriptor
> + if reading a released bg, validation fails and triggers -EROFS
>
> How to fix:
> Since the read BG is already released, we must avoid triggering -EROFS.
> With this commit, we use ocfs2_read_hint_group_descriptor() to detect
> the released BG block. This approach quietly handles this type of error
> and returns -EINVAL, which triggers the caller's existing conversion
> path to -ESTALE.
>
> Signed-off-by: Heming Zhao <heming.zhao@suse.com>
> Reviewed-by: Su Yue <glass.su@suse.com>
Looks good.
Reviewed-by: Joseph Qi <joseph.qi@linux.alibaba.com>
> ---
> fs/ocfs2/export.c | 6 ++++--
> fs/ocfs2/suballoc.c | 26 +++++++++++++++++---------
> 2 files changed, 21 insertions(+), 11 deletions(-)
>
> diff --git a/fs/ocfs2/export.c b/fs/ocfs2/export.c
> index b95724b767e1..9c2665dd24e2 100644
> --- a/fs/ocfs2/export.c
> +++ b/fs/ocfs2/export.c
> @@ -74,8 +74,9 @@ static struct dentry *ocfs2_get_dentry(struct super_block *sb,
> * nice
> */
> status = -ESTALE;
> - } else
> + } else if (status != -ESTALE) {
> mlog(ML_ERROR, "test inode bit failed %d\n", status);
> + }
> goto unlock_nfs_sync;
> }
>
> @@ -162,8 +163,9 @@ static struct dentry *ocfs2_get_parent(struct dentry *child)
> if (status < 0) {
> if (status == -EINVAL) {
> status = -ESTALE;
> - } else
> + } else if (status != -ESTALE) {
> mlog(ML_ERROR, "test inode bit failed %d\n", status);
> + }
> parent = ERR_PTR(status);
> goto bail_unlock;
> }
> diff --git a/fs/ocfs2/suballoc.c b/fs/ocfs2/suballoc.c
> index 9a19f5230c8c..9b0ae1bc445b 100644
> --- a/fs/ocfs2/suballoc.c
> +++ b/fs/ocfs2/suballoc.c
> @@ -3152,7 +3152,7 @@ static int ocfs2_test_suballoc_bit(struct ocfs2_super *osb,
> struct ocfs2_group_desc *group;
> struct buffer_head *group_bh = NULL;
> u64 bg_blkno;
> - int status;
> + int status, quiet = 0, released;
>
> trace_ocfs2_test_suballoc_bit((unsigned long long)blkno,
> (unsigned int)bit);
> @@ -3168,9 +3168,13 @@ static int ocfs2_test_suballoc_bit(struct ocfs2_super *osb,
>
> bg_blkno = group_blkno ? group_blkno :
> ocfs2_which_suballoc_group(blkno, bit);
> - status = ocfs2_read_group_descriptor(suballoc, alloc_di, bg_blkno,
> - &group_bh);
> - if (status < 0) {
> + status = ocfs2_read_hint_group_descriptor(suballoc, alloc_di, bg_blkno,
> + &group_bh, &released);
> + if (released) {
> + quiet = 1;
> + status = -ESTALE;
> + goto bail;
> + } else if (status < 0) {
> mlog(ML_ERROR, "read group %llu failed %d\n",
> (unsigned long long)bg_blkno, status);
> goto bail;
> @@ -3182,7 +3186,7 @@ static int ocfs2_test_suballoc_bit(struct ocfs2_super *osb,
> bail:
> brelse(group_bh);
>
> - if (status)
> + if (status && !quiet)
> mlog_errno(status);
> return status;
> }
> @@ -3202,7 +3206,7 @@ static int ocfs2_test_suballoc_bit(struct ocfs2_super *osb,
> */
> int ocfs2_test_inode_bit(struct ocfs2_super *osb, u64 blkno, int *res)
> {
> - int status;
> + int status, quiet = 0;
> u64 group_blkno = 0;
> u16 suballoc_bit = 0, suballoc_slot = 0;
> struct inode *inode_alloc_inode;
> @@ -3244,8 +3248,12 @@ int ocfs2_test_inode_bit(struct ocfs2_super *osb, u64 blkno, int *res)
>
> status = ocfs2_test_suballoc_bit(osb, inode_alloc_inode, alloc_bh,
> group_blkno, blkno, suballoc_bit, res);
> - if (status < 0)
> - mlog(ML_ERROR, "test suballoc bit failed %d\n", status);
> + if (status < 0) {
> + if (status == -ESTALE)
> + quiet = 1;
> + else
> + mlog(ML_ERROR, "test suballoc bit failed %d\n", status);
> + }
>
> ocfs2_inode_unlock(inode_alloc_inode, 0);
> inode_unlock(inode_alloc_inode);
> @@ -3253,7 +3261,7 @@ int ocfs2_test_inode_bit(struct ocfs2_super *osb, u64 blkno, int *res)
> iput(inode_alloc_inode);
> brelse(alloc_bh);
> bail:
> - if (status)
> + if (status && !quiet)
> mlog_errno(status);
> return status;
> }
prev parent reply other threads:[~2025-12-12 7:59 UTC|newest]
Thread overview: 5+ messages / expand[flat|nested] mbox.gz Atom feed top
2025-12-12 7:45 [PATCH v6 0/2] ocfs2: give ocfs2 the ability to reclaim suballocator free bg Heming Zhao
2025-12-12 7:45 ` [PATCH v6 1/2] " Heming Zhao
2025-12-12 7:58 ` Joseph Qi
2025-12-12 7:45 ` [PATCH v6 2/2] ocfs2: detect released suballocator BG for fh_to_[dentry|parent] Heming Zhao
2025-12-12 7:59 ` Joseph Qi [this message]
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=8aa6a061-0441-43db-84d7-2cc19b269193@linux.alibaba.com \
--to=joseph.qi@linux.alibaba.com \
--cc=akpm@linux-foundation.org \
--cc=glass.su@suse.com \
--cc=heming.zhao@suse.com \
--cc=jlbec@evilplan.org \
--cc=linux-kernel@vger.kernel.org \
--cc=mark@fasheh.com \
--cc=ocfs2-devel@lists.linux.dev \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox
all inboxes | Powered by JetHome®