From: Jishnu Prakash <jishnu.prakash@oss.qualcomm.com>
To: Pankaj Patil <pankaj.patil@oss.qualcomm.com>
Cc: mfd@lists.linux.dev, linux-arm-msm@vger.kernel.org,
linux-kernel@vger.kernel.org,
Sibi Sankar <sibi.sankar@oss.qualcomm.com>,
Rajendra Nayak <rajendra.nayak@oss.qualcomm.com>,
Lee Jones <lee@kernel.org>,
Kamal Wadhwa <kamal.wadhwa@oss.qualcomm.com>
Subject: Re: [BUG] qcom-spmi-adc-tm5: lockdep reports invalid wait context in IRQ handler
Date: Mon, 16 Nov 2026 13:18:15 +0530 [thread overview]
Message-ID: <8abf16ac-7906-4ff6-ba4c-4e3f2c00b214@oss.qualcomm.com> (raw)
In-Reply-To: <1cb6d902-73f3-4d65-96f4-4b3c5217253c@oss.qualcomm.com>
Hi Pankaj,
On 11/6/2026 11:37 AM, Pankaj Patil wrote:
> Hello,
>
> I am seeing the following lockdep warning on Linux v7.4-rc1 when
> CONFIG_PROVE_LOCKING is enabled. I can reproduce it on a Qualcomm Glymur
> CRD and so far I have only observed from v7.4-rc1 and only when
> CONFIG_PROVE_LOCKING is enabled.
>
> The warning is triggered from the Qualcomm SPMI ADC TM5 Gen3 interrupt
> path while adc5_gen3_read() performs a regmap read:
>
I have pushed a fix for this lock warning here:
https://lore.kernel.org/all/20261113-adctm5_gen3_hardirq_removal-v2-1-a0c9c4800941@oss.qualcomm.com/.
The issue happens due to taking a spinlock in a regmap read during the
primary IRQ handler. The fix moves all the actions of the primary handler
into the threaded handler as having a separate primary hardirq handler
is not strictly necessary.
Thanks,
Jishnu
> swapper/0/0 is trying to lock:
> ffff000b67201018
> (qcom_spmi_pmic:259:(&spmi_regmap_config)->lock){....}-{3:3}, at:
> regmap_lock_spinlock+0x20/0x40
> other info that might help us debug this:
> context-{2:2}
> locks held by swapper/0/0: 0, last CPU#0
> stack backtrace:
>
> CPU: 0 UID: 0 PID: 0 Comm: swapper/0 Not tainted 7.4.0-rc1 #1 PREEMPT(full)
>
> Call trace:
> check_wait_context.isra.0+0x2d8/0x380
> __lock_acquire+0x2ec/0x840
> lock_acquire.part.0+0xe0/0x250
> lock_acquire+0x8c/0x1e0
> _raw_spin_lock_irqsave+0x6c/0xd8
> regmap_lock_spinlock+0x20/0x40
> regmap_raw_read+0x88/0x328
> regmap_bulk_read+0x10c/0x340
> adc5_gen3_read+0x38/0x50 [qcom_spmi_adc5_gen3]
> adctm5_gen3_isr+0x90/0x130 [qcom_spmi_adc_tm5_gen3]
>
> There is also an ADC timeout around the same time:
>
> qcom-spmi-adc5-gen3 c42d000.spmi:pmic@0:adc@9000:
> Reading ADC channel pm8550_gpio_02 timed out
>
> Kernel/platform details:
>
> Kernel: 7.4.0-rc1 #1, PREEMPT(full), not tainted
> Platform: Qualcomm Glymur CRD
> Firmware: 6.0.260410.BOOT.MXF.2.4-00601-HAMOA-1 (04/10/2026)
> Config: CONFIG_PROVE_LOCKING=y
>
> The full backtrace is:
>
> [ 12.924146] 7.4.0-rc1 #1 Not tainted
> [ 12.927848] -----------------------------
> [ 12.931982] swapper/0/0 is trying to lock:
> [ 12.936217] ffff000b67201018
> (qcom_spmi_pmic:259:(&spmi_regmap_config)->lock){....}-{3:3}, at:
> regmap_lock_spinlock+0x20/0x40
> [ 12.947855] other info that might help us debug this:
> [ 12.953060] context-{2:2}
> [ 12.955773] locks held by swapper/0/0: 0, last CPU#0
> [ 12.960896] stack backtrace:
> [ 12.963889] CPU: 0 UID: 0 PID: 0 Comm: swapper/0 Not tainted
> 7.4.0-rc1 #1 PREEMPT(full)
> [ 12.972208] Hardware name: Qualcomm CRD, BIOS
> 6.0.260410.BOOT.MXF.2.4-00601-HAMOA-1 04/10/2026
> [ 12.981070] Call trace:
> [ 12.983606] show_stack+0x20/0x38 (C)
> [ 12.987398] dump_stack_lvl+0x7c/0xb0
> [ 12.991180] dump_stack+0x18/0x24
> [ 12.994610] check_wait_context.isra.0+0x2d8/0x380
> [ 12.999552] __lock_acquire+0x2ec/0x840
> [ 13.003514] lock_acquire.part.0+0xe0/0x250
> [ 13.007837] lock_acquire+0x8c/0x1e0
> [ 13.011530] _raw_spin_lock_irqsave+0x6c/0xd8
> [ 13.013256] qcom-spmi-adc5-gen3 c42d000.spmi:pmic@0:adc@9000: Reading
> ADC channel pm8550_gpio_02 timed out
> [ 13.025949] regmap_lock_spinlock+0x20/0x40
> [ 13.030264] regmap_raw_read+0x88/0x328
> [ 13.034227] regmap_bulk_read+0x10c/0x340
> [ 13.038368] adc5_gen3_read+0x38/0x50 [qcom_spmi_adc5_gen3]
> [ 13.044118] adctm5_gen3_isr+0x90/0x130 [qcom_spmi_adc_tm5_gen3]
> [ 13.050313] __handle_irq_event_percpu+0xac/0x4c8
> [ 13.055170] handle_irq_event+0x54/0x120
> [ 13.059218] handle_edge_irq+0x104/0x1d0
> [ 13.063272] handle_irq_desc+0x3c/0x68
> [ 13.067152] generic_handle_irq+0x28/0x40
> [ 13.071289] periph_interrupt+0xe8/0x1c0
> [ 13.075353] pmic_arb_chained_irq+0x148/0x380
> [ 13.079860] handle_irq_desc+0x3c/0x68
> [ 13.083730] generic_handle_domain_irq+0x20/0x40
> [ 13.088503] __gic_handle_irq.isra.0+0x58/0x108
> [ 13.093179] gic_handle_irq+0x1c/0x40
> [ 13.096976] call_on_irq_stack+0x30/0x48
> [ 13.101024] do_interrupt_handler+0x88/0x98
> [ 13.105342] el1_interrupt+0x3c/0x60
> [ 13.109035] el1h_64_irq_handler+0x18/0x30
> [ 13.113268] el1h_64_irq+0x78/0x80
> [ 13.116791] cpuidle_enter_state+0x13c/0xa10 (P)
> [ 13.121552] cpuidle_enter+0x40/0x60
> [ 13.125251] cpuidle_idle_call+0x184/0x270
> [ 13.129483] do_idle+0xac/0x150
> [ 13.132729] cpu_startup_entry+0x40/0x58
> [ 13.136786] rest_init+0x214/0x220
> [ 13.140309] start_kernel+0x4c4/0x4d0
> [ 13.144097] __primary_switched+0x88/0x98
>
> Please let me know if additional logs, the kernel config, or testing of
> a proposed fix would be useful.
>
> Thanks,
> Pankaj
prev parent reply other threads:[~2026-11-16 7:48 UTC|newest]
Thread overview: 2+ messages / expand[flat|nested] mbox.gz Atom feed top
2026-11-06 6:07 Pankaj Patil
2026-11-16 7:48 ` Jishnu Prakash [this message]
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=8abf16ac-7906-4ff6-ba4c-4e3f2c00b214@oss.qualcomm.com \
--to=jishnu.prakash@oss.qualcomm.com \
--cc=kamal.wadhwa@oss.qualcomm.com \
--cc=lee@kernel.org \
--cc=linux-arm-msm@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=mfd@lists.linux.dev \
--cc=pankaj.patil@oss.qualcomm.com \
--cc=rajendra.nayak@oss.qualcomm.com \
--cc=sibi.sankar@oss.qualcomm.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox
all inboxes | Powered by JetHome®