mirror of https://lore.kernel.org/lkml/
 help / color / mirror / Atom feed
From: "Adrian McMenamin" <lkmladrian@gmail.com>
To: alsa-devel@alsa-project.org
Cc: linux-kernel@vger.kernel.org, linuxsh-dev@lists.sourceforge.net
Subject: [PATCH] ALSA - protect Dreamcast PCM driver (AICA) from G2 bus effects
Date: Wed, 17 Oct 2007 21:30:28 +0100	[thread overview]
Message-ID: <8b67d60710171330n55b9b575k949f3d239b380165@mail.gmail.com> (raw)

The G2 bus on the SEGA Dreamcast connects both the maple peripheral
bus and the AICA sound memory. DMA requests on one can cause the other
to timeout on memory operations.

This patch prevents maple interrupts from causing hiccoughs in the
AICA sound (maple bus code will land in 2.6.24).

There are other cleanups for this (AICA) code - but this is in effect
a regression fix rather than a cleanup.

Signed-off-by: Adrian McMenamin <adrian@mcmen.demon.co.uk>

diff --git a/sound/sh/aica.c b/sound/sh/aica.c
index 7397865..407981d 100644
--- a/sound/sh/aica.c
+++ b/sound/sh/aica.c
@@ -106,11 +106,14 @@ static void spu_write_wait(void)
 static void spu_memset(u32 toi, u32 what, int length)
 {
 	int i;
+	unsigned long flags;
 	snd_assert(length % 4 == 0, return);
 	for (i = 0; i < length; i++) {
 		if (!(i % 8))
 			spu_write_wait();
+		local_irq_save(flags);
 		writel(what, toi + SPU_MEMORY_BASE);
+		local_irq_restore(flags);
 		toi++;
 	}
 }
@@ -118,6 +121,7 @@ static void spu_memset(u32 toi, u32 what, int length)
 /* spu_memload - write to SPU address space */
 static void spu_memload(u32 toi, void *from, int length)
 {
+	unsigned long flags;
 	u32 *froml = from;
 	u32 __iomem *to = (u32 __iomem *) (SPU_MEMORY_BASE + toi);
 	int i;
@@ -128,7 +132,9 @@ static void spu_memload(u32 toi, void *from, int length)
 		if (!(i % 8))
 			spu_write_wait();
 		val = *froml;
+		local_irq_save(flags);
 		writel(val, to);
+		local_irq_restore(flags);
 		froml++;
 		to++;
 	}
@@ -138,28 +144,36 @@ static void spu_memload(u32 toi, void *from, int length)
 static void spu_disable(void)
 {
 	int i;
+	unsigned long flags;
 	u32 regval;
 	spu_write_wait();
 	regval = readl(ARM_RESET_REGISTER);
 	regval |= 1;
 	spu_write_wait();
+	local_irq_save(flags);
 	writel(regval, ARM_RESET_REGISTER);
+	local_irq_restore(flags);
 	for (i = 0; i < 64; i++) {
 		spu_write_wait();
 		regval = readl(SPU_REGISTER_BASE + (i * 0x80));
 		regval = (regval & ~0x4000) | 0x8000;
 		spu_write_wait();
+		local_irq_save(flags);
 		writel(regval, SPU_REGISTER_BASE + (i * 0x80));
+		local_irq_restore(flags);
 	}
 }

 /* spu_enable - set spu registers to enable sound output */
 static void spu_enable(void)
 {
+	unsigned long flags;
 	u32 regval = readl(ARM_RESET_REGISTER);
 	regval &= ~1;
 	spu_write_wait();
+	local_irq_save(flags);
 	writel(regval, ARM_RESET_REGISTER);
+	local_irq_restore(flags);
 }

 /*
@@ -168,25 +182,34 @@ static void spu_enable(void)
 */
 static void spu_reset(void)
 {
+	unsigned long flags;
 	spu_disable();
 	spu_memset(0, 0, 0x200000 / 4);
 	/* Put ARM7 in endless loop */
+	local_irq_save(flags);
 	ctrl_outl(0xea000002, SPU_MEMORY_BASE);
+	local_irq_restore(flags);
 	spu_enable();
 }

 /* aica_chn_start - write to spu to start playback */
 static void aica_chn_start(void)
 {
+	unsigned long flags;
 	spu_write_wait();
+	local_irq_save(flags);
 	writel(AICA_CMD_KICK | AICA_CMD_START, (u32 *) AICA_CONTROL_POINT);
+	local_irq_restore(flags);
 }

 /* aica_chn_halt - write to spu to halt playback */
 static void aica_chn_halt(void)
 {
+	unsigned long flags;
 	spu_write_wait();
+	local_irq_save(flags);
 	writel(AICA_CMD_KICK | AICA_CMD_STOP, (u32 *) AICA_CONTROL_POINT);
+	local_irq_restore(flags);
 }

 /* ALSA code below */
@@ -213,12 +236,13 @@ static int aica_dma_transfer(int channels, int
buffer_size,
 	int q, err, period_offset;
 	struct snd_card_aica *dreamcastcard;
 	struct snd_pcm_runtime *runtime;
-	err = 0;
+	unsigned long flags;
 	dreamcastcard = substream->pcm->private_data;
 	period_offset = dreamcastcard->clicks;
 	period_offset %= (AICA_PERIOD_NUMBER / channels);
 	runtime = substream->runtime;
 	for (q = 0; q < channels; q++) {
+		local_irq_save(flags);
 		err = dma_xfer(AICA_DMA_CHANNEL,
 			       (unsigned long) (runtime->dma_area +
 						(AICA_BUFFER_SIZE * q) /
@@ -228,9 +252,12 @@ static int aica_dma_transfer(int channels, int buffer_size,
 			       AICA_CHANNEL0_OFFSET + q * CHANNEL_OFFSET +
 			       AICA_PERIOD_SIZE * period_offset,
 			       buffer_size / channels, AICA_DMA_MODE);
-		if (unlikely(err < 0))
+		if (unlikely(err < 0)) {
+			local_irq_restore(flags);
 			break;
+		}
 		dma_wait_for_completion(AICA_DMA_CHANNEL);
+		local_irq_restore(flags);
 	}
 	return err;
 }

             reply	other threads:[~2007-10-17 20:30 UTC|newest]

Thread overview: 2+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2007-10-17 20:30 Adrian McMenamin [this message]
2007-10-18  8:18 ` [alsa-devel] " Takashi Iwai

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=8b67d60710171330n55b9b575k949f3d239b380165@mail.gmail.com \
    --to=lkmladrian@gmail.com \
    --cc=alsa-devel@alsa-project.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linuxsh-dev@lists.sourceforge.net \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox

all inboxes | Powered by JetHome®