Re: [PATCH v2 1/3] dt-bindings: display: panel: Add Samsung S6D7AA0 LCD panel controller

[Artur Weber <aweber.kernel@gmail.com>]

On 16/04/2023 15:07, Artur Weber wrote:
> Add bindings for the S6D7AA0 LCD panel controller, including the
> S6D7AA0-LSL080AL02 panel used in the Samsung Galaxy Tab 3 8.0 family
> of tablets.
> 
> Signed-off-by: Artur Weber <aweber.kernel@gmail.com>
> ---
> Changed in v2:
>    - Updated commit message
>    - Applied suggestions from Krzysztof Kozlowski
> ---
>   .../display/panel/samsung,s6d7aa0.yaml        | 51 +++++++++++++++++++
>   1 file changed, 51 insertions(+)
>   create mode 100644 Documentation/devicetree/bindings/display/panel/samsung,s6d7aa0.yaml
> 
> diff --git a/Documentation/devicetree/bindings/display/panel/samsung,s6d7aa0.yaml b/Documentation/devicetree/bindings/display/panel/samsung,s6d7aa0.yaml
> new file mode 100644
> index 000000000000..969cef7738b8
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/display/panel/samsung,s6d7aa0.yaml
> @@ -0,0 +1,51 @@
> +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
> +%YAML 1.2
> +---
> +$id: http://devicetree.org/schemas/display/panel/samsung,s6d7aa0.yaml#
> +$schema: http://devicetree.org/meta-schemas/core.yaml#
> +
> +title: Samsung S6D7AA0 MIPI-DSI LCD panel controller
> +
> +maintainers:
> +  - Artur Weber <aweber.kernel@gmail.com>
> +
> +allOf:
> +  - $ref: panel-common.yaml#
> +
> +properties:
> +  compatible:
> +    const: samsung,s6d7aa0-lsl080al02
> +
> +  reg: true
> +  reset-gpios: true
> +  backlight: true
> +
> +  enable-supply:
> +    description: Enable supply
> +
> +required:
> +  - compatible
> +  - reset-gpios
> +  - enable-supply
> +  - backlight
> +
> +additionalProperties: false
> +
> +examples:
> +  - |
> +    #include <dt-bindings/gpio/gpio.h>
> +
> +    dsi {
> +        #address-cells = <1>;
> +        #size-cells = <0>;
> +
> +        panel@0 {
> +            compatible = "samsung,s6d7aa0-lsl080al02";
> +            reg = <0>;
> +            enable-supply = <&lcd_enable_supply>;
> +            reset-gpios = <&gpf0 4 GPIO_ACTIVE_LOW>;
> +            backlight = <&backlight>;
> +        };
> +    };
> +
> +...

Wrong patch file, please ignore. Will re-send in a second.