From: Alexandre Mergnat <amergnat@baylibre.com>
To: "Bernhard Rosenkränzer" <bero@baylibre.com>,
linux-mediatek@lists.infradead.org, devicetree@vger.kernel.org,
linux-kernel@vger.kernel.org, linux-gpio@vger.kernel.org,
linux-arm-kernel@lists.infradead.org,
linux-serial@vger.kernel.org, linux-usb@vger.kernel.org,
robh+dt@kernel.org, krzysztof.kozlowski+dt@linaro.org,
tglx@linutronix.de, maz@kernel.org, lee@kernel.org,
linus.walleij@linaro.org, matthias.bgg@gmail.com,
gregkh@linuxfoundation.org, daniel.lezcano@linaro.org,
chunfeng.yun@mediatek.com,
angelogioacchino.delregno@collabora.com, nfraprado@collabora.com,
allen-kh.cheng@mediatek.com, sean.wang@mediatek.com,
zhiyong.tao@mediatek.com, khilman@baylibre.com
Subject: Re: [PATCH v9 9/9] arm64: dts: mediatek: Initial mt8365-evk support
Date: Wed, 22 Feb 2023 09:17:39 +0100 [thread overview]
Message-ID: <8c348b39-67f3-9210-1929-8b2f093be24c@baylibre.com> (raw)
In-Reply-To: <20230125143503.1015424-10-bero@baylibre.com>
Hi Matthias,
This is a gentle ping to know if you can take this patch please.
Sorry for the double mail, I screwed up the first send.
Best regards,
Alex
On 25/01/2023 15:35, Bernhard Rosenkränzer wrote:
> From: Fabien Parent <fparent@baylibre.com>
>
> This adds minimal support for the Mediatek 8365 SOC and the EVK reference
> board, allowing the board to boot to initramfs with serial port I/O.
>
> Signed-off-by: Fabien Parent <fparent@baylibre.com>
> [bero@baylibre.com: Removed parts depending on drivers that aren't upstream yet, cleanups, add CPU cache layout, add systimer, fix GIC]
> Signed-off-by: Bernhard Rosenkränzer <bero@baylibre.com>
> Tested-by: Kevin Hilman <khilman@baylibre.com>
> Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
> ---
> arch/arm64/boot/dts/mediatek/Makefile | 1 +
> arch/arm64/boot/dts/mediatek/mt8365-evk.dts | 168 +++++++++
> arch/arm64/boot/dts/mediatek/mt8365.dtsi | 377 ++++++++++++++++++++
> 3 files changed, 546 insertions(+)
> create mode 100644 arch/arm64/boot/dts/mediatek/mt8365-evk.dts
> create mode 100644 arch/arm64/boot/dts/mediatek/mt8365.dtsi
>
> diff --git a/arch/arm64/boot/dts/mediatek/Makefile b/arch/arm64/boot/dts/mediatek/Makefile
> index 813e735c5b96d..d78523c5a7dd6 100644
> --- a/arch/arm64/boot/dts/mediatek/Makefile
> +++ b/arch/arm64/boot/dts/mediatek/Makefile
> @@ -47,4 +47,5 @@ dtb-$(CONFIG_ARCH_MEDIATEK) += mt8195-cherry-tomato-r2.dtb
> dtb-$(CONFIG_ARCH_MEDIATEK) += mt8195-cherry-tomato-r3.dtb
> dtb-$(CONFIG_ARCH_MEDIATEK) += mt8195-demo.dtb
> dtb-$(CONFIG_ARCH_MEDIATEK) += mt8195-evb.dtb
> +dtb-$(CONFIG_ARCH_MEDIATEK) += mt8365-evk.dtb
> dtb-$(CONFIG_ARCH_MEDIATEK) += mt8516-pumpkin.dtb
> diff --git a/arch/arm64/boot/dts/mediatek/mt8365-evk.dts b/arch/arm64/boot/dts/mediatek/mt8365-evk.dts
> new file mode 100644
> index 0000000000000..4683704ea2355
> --- /dev/null
> +++ b/arch/arm64/boot/dts/mediatek/mt8365-evk.dts
> @@ -0,0 +1,168 @@
> +// SPDX-License-Identifier: GPL-2.0
> +/*
> + * Copyright (c) 2021-2022 BayLibre, SAS.
> + * Authors:
> + * Fabien Parent <fparent@baylibre.com>
> + * Bernhard Rosenkränzer <bero@baylibre.com>
> + */
> +
> +/dts-v1/;
> +
> +#include <dt-bindings/gpio/gpio.h>
> +#include <dt-bindings/input/input.h>
> +#include <dt-bindings/pinctrl/mt8365-pinfunc.h>
> +#include "mt8365.dtsi"
> +
> +/ {
> + model = "MediaTek MT8365 Open Platform EVK";
> + compatible = "mediatek,mt8365-evk", "mediatek,mt8365";
> +
> + aliases {
> + serial0 = &uart0;
> + };
> +
> + chosen {
> + stdout-path = "serial0:921600n8";
> + };
> +
> + firmware {
> + optee {
> + compatible = "linaro,optee-tz";
> + method = "smc";
> + };
> + };
> +
> + gpio-keys {
> + compatible = "gpio-keys";
> + pinctrl-names = "default";
> + pinctrl-0 = <&gpio_keys>;
> +
> + key-volume-up {
> + gpios = <&pio 24 GPIO_ACTIVE_LOW>;
> + label = "volume_up";
> + linux,code = <KEY_VOLUMEUP>;
> + wakeup-source;
> + debounce-interval = <15>;
> + };
> + };
> +
> + memory@40000000 {
> + device_type = "memory";
> + reg = <0 0x40000000 0 0xc0000000>;
> + };
> +
> + usb_otg_vbus: regulator-0 {
> + compatible = "regulator-fixed";
> + regulator-name = "otg_vbus";
> + regulator-min-microvolt = <5000000>;
> + regulator-max-microvolt = <5000000>;
> + gpio = <&pio 16 GPIO_ACTIVE_HIGH>;
> + enable-active-high;
> + };
> +
> + reserved-memory {
> + #address-cells = <2>;
> + #size-cells = <2>;
> + ranges;
> +
> + /* 128 KiB reserved for ARM Trusted Firmware (BL31) */
> + bl31_secmon_reserved: secmon@43000000 {
> + no-map;
> + reg = <0 0x43000000 0 0x20000>;
> + };
> +
> + /* 12 MiB reserved for OP-TEE (BL32)
> + * +-----------------------+ 0x43e0_0000
> + * | SHMEM 2MiB |
> + * +-----------------------+ 0x43c0_0000
> + * | | TA_RAM 8MiB |
> + * + TZDRAM +--------------+ 0x4340_0000
> + * | | TEE_RAM 2MiB |
> + * +-----------------------+ 0x4320_0000
> + */
> + optee_reserved: optee@43200000 {
> + no-map;
> + reg = <0 0x43200000 0 0x00c00000>;
> + };
> + };
> +};
> +
> +&pio {
> + gpio_keys: gpio-keys-pins {
> + pins {
> + pinmux = <MT8365_PIN_24_KPCOL0__FUNC_KPCOL0>;
> + bias-pull-up;
> + input-enable;
> + };
> + };
> +
> + uart0_pins: uart0-pins {
> + pins {
> + pinmux = <MT8365_PIN_35_URXD0__FUNC_URXD0>,
> + <MT8365_PIN_36_UTXD0__FUNC_UTXD0>;
> + };
> + };
> +
> + uart1_pins: uart1-pins {
> + pins {
> + pinmux = <MT8365_PIN_37_URXD1__FUNC_URXD1>,
> + <MT8365_PIN_38_UTXD1__FUNC_UTXD1>;
> + };
> + };
> +
> + uart2_pins: uart2-pins {
> + pins {
> + pinmux = <MT8365_PIN_39_URXD2__FUNC_URXD2>,
> + <MT8365_PIN_40_UTXD2__FUNC_UTXD2>;
> + };
> + };
> +
> + usb_pins: usb-pins {
> + id-pins {
> + pinmux = <MT8365_PIN_17_GPIO17__FUNC_GPIO17>;
> + input-enable;
> + bias-pull-up;
> + };
> +
> + usb0-vbus-pins {
> + pinmux = <MT8365_PIN_16_GPIO16__FUNC_USB_DRVVBUS>;
> + output-high;
> + };
> +
> + usb1-vbus-pins {
> + pinmux = <MT8365_PIN_18_GPIO18__FUNC_GPIO18>;
> + output-high;
> + };
> + };
> +
> + pwm_pins: pwm-pins {
> + pins {
> + pinmux = <MT8365_PIN_19_DISP_PWM__FUNC_PWM_A>,
> + <MT8365_PIN_116_I2S_BCK__FUNC_PWM_C>;
> + };
> + };
> +};
> +
> +&pwm {
> + pinctrl-0 = <&pwm_pins>;
> + pinctrl-names = "default";
> + status = "okay";
> +};
> +
> +&uart0 {
> + pinctrl-0 = <&uart0_pins>;
> + pinctrl-names = "default";
> + status = "okay";
> +};
> +
> +&uart1 {
> + pinctrl-0 = <&uart1_pins>;
> + pinctrl-names = "default";
> + status = "okay";
> +};
> +
> +&uart2 {
> + pinctrl-0 = <&uart2_pins>;
> + pinctrl-names = "default";
> + status = "okay";
> +};
> diff --git a/arch/arm64/boot/dts/mediatek/mt8365.dtsi b/arch/arm64/boot/dts/mediatek/mt8365.dtsi
> new file mode 100644
> index 0000000000000..15ac4c1f09661
> --- /dev/null
> +++ b/arch/arm64/boot/dts/mediatek/mt8365.dtsi
> @@ -0,0 +1,377 @@
> +// SPDX-License-Identifier: (GPL-2.0 OR MIT)
> +/*
> + * (C) 2018 MediaTek Inc.
> + * Copyright (C) 2022 BayLibre SAS
> + * Fabien Parent <fparent@baylibre.com>
> + * Bernhard Rosenkränzer <bero@baylibre.com>
> + */
> +#include <dt-bindings/clock/mediatek,mt8365-clk.h>
> +#include <dt-bindings/interrupt-controller/arm-gic.h>
> +#include <dt-bindings/interrupt-controller/irq.h>
> +#include <dt-bindings/phy/phy.h>
> +
> +/ {
> + compatible = "mediatek,mt8365";
> + interrupt-parent = <&sysirq>;
> + #address-cells = <2>;
> + #size-cells = <2>;
> +
> + cpus {
> + #address-cells = <1>;
> + #size-cells = <0>;
> +
> + cpu-map {
> + cluster0 {
> + core0 {
> + cpu = <&cpu0>;
> + };
> + core1 {
> + cpu = <&cpu1>;
> + };
> + core2 {
> + cpu = <&cpu2>;
> + };
> + core3 {
> + cpu = <&cpu3>;
> + };
> + };
> + };
> +
> + cpu0: cpu@0 {
> + device_type = "cpu";
> + compatible = "arm,cortex-a53";
> + reg = <0x0>;
> + #cooling-cells = <2>;
> + enable-method = "psci";
> + i-cache-size = <0x8000>;
> + i-cache-line-size = <64>;
> + i-cache-sets = <256>;
> + d-cache-size = <0x8000>;
> + d-cache-line-size = <64>;
> + d-cache-sets = <256>;
> + next-level-cache = <&l2>;
> + };
> +
> + cpu1: cpu@1 {
> + device_type = "cpu";
> + compatible = "arm,cortex-a53";
> + reg = <0x1>;
> + #cooling-cells = <2>;
> + enable-method = "psci";
> + i-cache-size = <0x8000>;
> + i-cache-line-size = <64>;
> + i-cache-sets = <256>;
> + d-cache-size = <0x8000>;
> + d-cache-line-size = <64>;
> + d-cache-sets = <256>;
> + next-level-cache = <&l2>;
> + };
> +
> + cpu2: cpu@2 {
> + device_type = "cpu";
> + compatible = "arm,cortex-a53";
> + reg = <0x2>;
> + #cooling-cells = <2>;
> + enable-method = "psci";
> + i-cache-size = <0x8000>;
> + i-cache-line-size = <64>;
> + i-cache-sets = <256>;
> + d-cache-size = <0x8000>;
> + d-cache-line-size = <64>;
> + d-cache-sets = <256>;
> + next-level-cache = <&l2>;
> + };
> +
> + cpu3: cpu@3 {
> + device_type = "cpu";
> + compatible = "arm,cortex-a53";
> + reg = <0x3>;
> + #cooling-cells = <2>;
> + enable-method = "psci";
> + i-cache-size = <0x8000>;
> + i-cache-line-size = <64>;
> + i-cache-sets = <256>;
> + d-cache-size = <0x8000>;
> + d-cache-line-size = <64>;
> + d-cache-sets = <256>;
> + next-level-cache = <&l2>;
> + };
> +
> + l2: l2-cache {
> + compatible = "cache";
> + cache-level = <2>;
> + cache-size = <0x80000>;
> + cache-line-size = <64>;
> + cache-sets = <512>;
> + cache-unified;
> + };
> + };
> +
> + clk26m: oscillator {
> + compatible = "fixed-clock";
> + #clock-cells = <0>;
> + clock-frequency = <26000000>;
> + clock-output-names = "clk26m";
> + };
> +
> + psci {
> + compatible = "arm,psci-1.0";
> + method = "smc";
> + };
> +
> + soc {
> + #address-cells = <2>;
> + #size-cells = <2>;
> + compatible = "simple-bus";
> + ranges;
> +
> + gic: interrupt-controller@c000000 {
> + compatible = "arm,gic-v3";
> + #interrupt-cells = <3>;
> + interrupt-parent = <&gic>;
> + interrupt-controller;
> + reg = <0 0x0c000000 0 0x10000>, /* GICD */
> + <0 0x0c080000 0 0x80000>, /* GICR */
> + <0 0x0c400000 0 0x2000>, /* GICC */
> + <0 0x0c410000 0 0x1000>, /* GICH */
> + <0 0x0c420000 0 0x2000>; /* GICV */
> +
> + interrupts = <GIC_PPI 9 IRQ_TYPE_LEVEL_HIGH>;
> + };
> +
> + topckgen: syscon@10000000 {
> + compatible = "mediatek,mt8365-topckgen", "syscon";
> + reg = <0 0x10000000 0 0x1000>;
> + #clock-cells = <1>;
> + };
> +
> + infracfg: syscon@10001000 {
> + compatible = "mediatek,mt8365-infracfg", "syscon";
> + reg = <0 0x10001000 0 0x1000>;
> + #clock-cells = <1>;
> + };
> +
> + pericfg: syscon@10003000 {
> + compatible = "mediatek,mt8365-pericfg", "syscon";
> + reg = <0 0x10003000 0 0x1000>;
> + #clock-cells = <1>;
> + };
> +
> + syscfg_pctl: syscfg-pctl@10005000 {
> + compatible = "mediatek,mt8365-syscfg", "syscon";
> + reg = <0 0x10005000 0 0x1000>;
> + };
> +
> + pio: pinctrl@1000b000 {
> + compatible = "mediatek,mt8365-pinctrl";
> + reg = <0 0x1000b000 0 0x1000>;
> + mediatek,pctl-regmap = <&syscfg_pctl>;
> + gpio-controller;
> + #gpio-cells = <2>;
> + interrupt-controller;
> + #interrupt-cells = <2>;
> + interrupts = <GIC_SPI 115 IRQ_TYPE_LEVEL_HIGH>;
> + };
> +
> + apmixedsys: syscon@1000c000 {
> + compatible = "mediatek,mt8365-apmixedsys", "syscon";
> + reg = <0 0x1000c000 0 0x1000>;
> + #clock-cells = <1>;
> + };
> +
> + keypad: keypad@10010000 {
> + compatible = "mediatek,mt6779-keypad";
> + reg = <0 0x10010000 0 0x1000>;
> + wakeup-source;
> + interrupts = <GIC_SPI 124 IRQ_TYPE_EDGE_FALLING>;
> + clocks = <&clk26m>;
> + clock-names = "kpd";
> + status = "disabled";
> + };
> +
> + mcucfg: syscon@10200000 {
> + compatible = "mediatek,mt8365-mcucfg", "syscon";
> + reg = <0 0x10200000 0 0x2000>;
> + #clock-cells = <1>;
> + };
> +
> + sysirq: interrupt-controller@10200a80 {
> + compatible = "mediatek,mt8365-sysirq", "mediatek,mt6577-sysirq";
> + interrupt-controller;
> + #interrupt-cells = <3>;
> + interrupt-parent = <&gic>;
> + reg = <0 0x10200a80 0 0x20>;
> + };
> +
> + infracfg_nao: infracfg@1020e000 {
> + compatible = "mediatek,mt8365-infracfg", "syscon";
> + reg = <0 0x1020e000 0 0x1000>;
> + #clock-cells = <1>;
> + };
> +
> + rng: rng@1020f000 {
> + compatible = "mediatek,mt8365-rng", "mediatek,mt7623-rng";
> + reg = <0 0x1020f000 0 0x100>;
> + clocks = <&infracfg CLK_IFR_TRNG>;
> + clock-names = "rng";
> + };
> +
> + apdma: dma-controller@11000280 {
> + compatible = "mediatek,mt8365-uart-dma", "mediatek,mt6577-uart-dma";
> + reg = <0 0x11000280 0 0x80>,
> + <0 0x11000300 0 0x80>,
> + <0 0x11000380 0 0x80>,
> + <0 0x11000400 0 0x80>,
> + <0 0x11000580 0 0x80>,
> + <0 0x11000600 0 0x80>;
> + interrupts = <GIC_SPI 45 IRQ_TYPE_LEVEL_LOW>,
> + <GIC_SPI 46 IRQ_TYPE_LEVEL_LOW>,
> + <GIC_SPI 47 IRQ_TYPE_LEVEL_LOW>,
> + <GIC_SPI 48 IRQ_TYPE_LEVEL_LOW>,
> + <GIC_SPI 51 IRQ_TYPE_LEVEL_LOW>,
> + <GIC_SPI 52 IRQ_TYPE_LEVEL_LOW>;
> + dma-requests = <6>;
> + clocks = <&infracfg CLK_IFR_AP_DMA>;
> + clock-names = "apdma";
> + #dma-cells = <1>;
> + };
> +
> + uart0: serial@11002000 {
> + compatible = "mediatek,mt8365-uart", "mediatek,mt6577-uart";
> + reg = <0 0x11002000 0 0x1000>;
> + interrupts = <GIC_SPI 35 IRQ_TYPE_LEVEL_LOW>;
> + clocks = <&clk26m>, <&infracfg CLK_IFR_UART0>;
> + clock-names = "baud", "bus";
> + dmas = <&apdma 0>, <&apdma 1>;
> + dma-names = "tx", "rx";
> + status = "disabled";
> + };
> +
> + uart1: serial@11003000 {
> + compatible = "mediatek,mt8365-uart", "mediatek,mt6577-uart";
> + reg = <0 0x11003000 0 0x1000>;
> + interrupts = <GIC_SPI 36 IRQ_TYPE_LEVEL_LOW>;
> + clocks = <&clk26m>, <&infracfg CLK_IFR_UART1>;
> + clock-names = "baud", "bus";
> + dmas = <&apdma 2>, <&apdma 3>;
> + dma-names = "tx", "rx";
> + status = "disabled";
> + };
> +
> + uart2: serial@11004000 {
> + compatible = "mediatek,mt8365-uart", "mediatek,mt6577-uart";
> + reg = <0 0x11004000 0 0x1000>;
> + interrupts = <GIC_SPI 37 IRQ_TYPE_LEVEL_LOW>;
> + clocks = <&clk26m>, <&infracfg CLK_IFR_UART2>;
> + clock-names = "baud", "bus";
> + dmas = <&apdma 4>, <&apdma 5>;
> + dma-names = "tx", "rx";
> + status = "disabled";
> + };
> +
> + pwm: pwm@11006000 {
> + compatible = "mediatek,mt8365-pwm";
> + reg = <0 0x11006000 0 0x1000>;
> + #pwm-cells = <2>;
> + interrupts = <GIC_SPI 76 IRQ_TYPE_LEVEL_LOW>;
> + clocks = <&infracfg CLK_IFR_PWM_HCLK>,
> + <&infracfg CLK_IFR_PWM>,
> + <&infracfg CLK_IFR_PWM1>,
> + <&infracfg CLK_IFR_PWM2>,
> + <&infracfg CLK_IFR_PWM3>;
> + clock-names = "top", "main", "pwm1", "pwm2", "pwm3";
> + };
> +
> + spi: spi@1100a000 {
> + compatible = "mediatek,mt8365-spi", "mediatek,mt7622-spi";
> + reg = <0 0x1100a000 0 0x100>;
> + #address-cells = <1>;
> + #size-cells = <0>;
> + interrupts = <GIC_SPI 62 IRQ_TYPE_LEVEL_LOW>;
> + clocks = <&topckgen CLK_TOP_UNIVPLL2_D4>,
> + <&topckgen CLK_TOP_SPI_SEL>,
> + <&infracfg CLK_IFR_SPI0>;
> + clock-names = "parent-clk", "sel-clk", "spi-clk";
> + status = "disabled";
> + };
> +
> + ssusb: usb@11201000 {
> + compatible = "mediatek,mt8365-mtu3", "mediatek,mtu3";
> + reg = <0 0x11201000 0 0x2e00>, <0 0x11203e00 0 0x0100>;
> + reg-names = "mac", "ippc";
> + interrupts = <GIC_SPI 16 IRQ_TYPE_LEVEL_LOW>;
> + phys = <&u2port0 PHY_TYPE_USB2>,
> + <&u2port1 PHY_TYPE_USB2>;
> + clocks = <&topckgen CLK_TOP_SSUSB_TOP_CK_EN>,
> + <&infracfg CLK_IFR_SSUSB_REF>,
> + <&infracfg CLK_IFR_SSUSB_SYS>,
> + <&infracfg CLK_IFR_ICUSB>;
> + clock-names = "sys_ck", "ref_ck", "mcu_ck", "dma_ck";
> + #address-cells = <2>;
> + #size-cells = <2>;
> + ranges;
> + status = "disabled";
> +
> + usb_host: usb@11200000 {
> + compatible = "mediatek,mt8365-xhci", "mediatek,mtk-xhci";
> + reg = <0 0x11200000 0 0x1000>;
> + reg-names = "mac";
> + interrupts = <GIC_SPI 67 IRQ_TYPE_LEVEL_LOW>;
> + clocks = <&topckgen CLK_TOP_SSUSB_TOP_CK_EN>,
> + <&infracfg CLK_IFR_SSUSB_REF>,
> + <&infracfg CLK_IFR_SSUSB_SYS>,
> + <&infracfg CLK_IFR_ICUSB>,
> + <&infracfg CLK_IFR_SSUSB_XHCI>;
> + clock-names = "sys_ck", "ref_ck", "mcu_ck",
> + "dma_ck", "xhci_ck";
> + status = "disabled";
> + };
> + };
> +
> + u3phy: t-phy@11cc0000 {
> + compatible = "mediatek,mt8365-tphy", "mediatek,generic-tphy-v2";
> + #address-cells = <1>;
> + #size-cells = <1>;
> + ranges = <0 0 0x11cc0000 0x9000>;
> +
> + u2port0: usb-phy@0 {
> + reg = <0x0 0x400>;
> + clocks = <&topckgen CLK_TOP_SSUSB_PHY_CK_EN>,
> + <&topckgen CLK_TOP_USB20_48M_EN>;
> + clock-names = "ref", "da_ref";
> + #phy-cells = <1>;
> + };
> +
> + u2port1: usb-phy@1000 {
> + reg = <0x1000 0x400>;
> + clocks = <&topckgen CLK_TOP_SSUSB_PHY_CK_EN>,
> + <&topckgen CLK_TOP_USB20_48M_EN>;
> + clock-names = "ref", "da_ref";
> + #phy-cells = <1>;
> + };
> + };
> + };
> +
> + timer {
> + compatible = "arm,armv8-timer";
> + interrupt-parent = <&gic>;
> + interrupts = <GIC_PPI 13 IRQ_TYPE_LEVEL_LOW>,
> + <GIC_PPI 14 IRQ_TYPE_LEVEL_LOW>,
> + <GIC_PPI 11 IRQ_TYPE_LEVEL_LOW>,
> + <GIC_PPI 10 IRQ_TYPE_LEVEL_LOW>;
> + };
> +
> + system_clk: dummy13m {
> + compatible = "fixed-clock";
> + clock-frequency = <13000000>;
> + #clock-cells = <0>;
> + };
> +
> + systimer: timer@10017000 {
> + compatible = "mediatek,mt8365-systimer", "mediatek,mt6795-systimer";
> + reg = <0 0x10017000 0 0x10>;
> + interrupts = <GIC_SPI 138 IRQ_TYPE_LEVEL_LOW>;
> + clocks = <&system_clk>;
> + clock-names = "clk13m";
> + };
> +};
next prev parent reply other threads:[~2023-02-22 8:17 UTC|newest]
Thread overview: 24+ messages / expand[flat|nested] mbox.gz Atom feed top
2023-01-25 14:34 [PATCH v9 0/9] Add minimal MT8365 and MT8365-EVK support Bernhard Rosenkränzer
2023-01-25 14:34 ` [PATCH v9 1/9] dt-bindings: arm64: dts: mediatek: Add mt8365-evk board Bernhard Rosenkränzer
2023-01-25 14:34 ` [PATCH v9 2/9] dt-bindings: irq: mtk, sysirq: add support for mt8365 Bernhard Rosenkränzer
2023-01-25 14:34 ` [PATCH v9 3/9] dt-bindings: mfd: syscon: Add mt8365-syscfg Bernhard Rosenkränzer
2023-01-26 14:38 ` Lee Jones
2023-01-25 14:34 ` [PATCH v9 4/9] dt-bindings: pinctrl: add bindings for Mediatek MT8365 SoC Bernhard Rosenkränzer
2023-01-26 13:53 ` Linus Walleij
2023-01-25 14:34 ` [PATCH v9 5/9] dt-bindings: usb: mediatek,mtu3: add MT8365 SoC bindings Bernhard Rosenkränzer
2023-01-31 9:00 ` Chunfeng Yun (云春峰)
2023-01-25 14:35 ` [PATCH v9 6/9] dt-bindings: usb: mediatek,mtk-xhci: " Bernhard Rosenkränzer
2023-01-31 9:01 ` Chunfeng Yun (云春峰)
2023-01-25 14:35 ` [PATCH v9 7/9] dt-bindings: timer: mediatek,mtk-timer: add MT8365 Bernhard Rosenkränzer
2023-01-26 15:04 ` Daniel Lezcano
2023-02-13 18:26 ` [tip: timers/core] " tip-bot2 for Bernhard Rosenkränzer
2023-01-25 14:35 ` [PATCH v9 8/9] dt-bindings: serial: mediatek,uart: " Bernhard Rosenkränzer
2023-01-30 11:38 ` Matthias Brugger
2023-03-07 19:40 ` Kevin Hilman
2023-01-25 14:35 ` [PATCH v9 9/9] arm64: dts: mediatek: Initial mt8365-evk support Bernhard Rosenkränzer
2023-02-16 8:52 ` Alexandre Mergnat
2023-02-22 8:17 ` Alexandre Mergnat [this message]
2023-02-22 9:21 ` Greg KH
2023-02-22 9:58 ` Alexandre Mergnat
2023-03-06 5:02 ` Bernhard Rosenkränzer
2023-03-06 5:40 ` Greg KH
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=8c348b39-67f3-9210-1929-8b2f093be24c@baylibre.com \
--to=amergnat@baylibre.com \
--cc=allen-kh.cheng@mediatek.com \
--cc=angelogioacchino.delregno@collabora.com \
--cc=bero@baylibre.com \
--cc=chunfeng.yun@mediatek.com \
--cc=daniel.lezcano@linaro.org \
--cc=devicetree@vger.kernel.org \
--cc=gregkh@linuxfoundation.org \
--cc=khilman@baylibre.com \
--cc=krzysztof.kozlowski+dt@linaro.org \
--cc=lee@kernel.org \
--cc=linus.walleij@linaro.org \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-gpio@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-mediatek@lists.infradead.org \
--cc=linux-serial@vger.kernel.org \
--cc=linux-usb@vger.kernel.org \
--cc=matthias.bgg@gmail.com \
--cc=maz@kernel.org \
--cc=nfraprado@collabora.com \
--cc=robh+dt@kernel.org \
--cc=sean.wang@mediatek.com \
--cc=tglx@linutronix.de \
--cc=zhiyong.tao@mediatek.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox
all inboxes | Powered by JetHome®