Hi Fan,

On 10/17/2024 11:34 AM, Fan Ni wrote:
> On Tue, Oct 08, 2024 at 05:16:42PM -0500, Terry Bowman wrote:
>> This is a continuation of the CXL port error handling RFC from earlier.[1]
>> The RFC resulted in the decision to add CXL PCIe port error handling to
>> the existing RCH downstream port handling. This patchset adds the CXL PCIe
>> port handling and logging.
>>
>> The first 7 patches update the existing AER service driver to support CXL
>> PCIe port protocol error handling and reporting. This includes AER service
>> driver changes for adding correctable and uncorrectable error support, CXL
>> specific recovery handling, and addition of CXL driver callback handlers.
>>
>> The following 8 patches address CXL driver support for CXL PCIe port
>> protocol errors. This includes the following changes to the CXL drivers:
>> mapping CXL port and downstream port RAS registers, interface updates for
>> common RCH and VH, adding port specific error handlers, and protocol error
>> logging.
>>
>> [1] - https://lore.kernel.org/linux-cxl/20240617200411.1426554
>> -1-terry.bowman@amd.com/
>>
>> Testing:
>>
>> Below are test results for this patchset. This is using Qemu with a root
>> port (0c:00.0), upstream switch port (0d:00.0),and downstream switch port
>> (0e:00.0).
>>
>> This was tested using aer-inject updated to support CE and UCE internal
>> error injection. CXL RAS was set using a test patch (not upstreamed).
> 
> Hi Terry,
> Can you share the aer-inject repo for the testing or the test patch?
> 
> Fan

Sure, but, its easiest to attach the patch here.

Origin was https://github.com/jderrick/aer-inject.git
Base is 81701cbb30e35a1a76c3876f55692f91bdb9751b

Regards,
Terry