mirror of https://lore.kernel.org/lkml/
 help / color / mirror / Atom feed
From: Krzysztof Kozlowski <krzk@kernel.org>
To: Jonathan Brophy <professorjonny98@gmail.com>,
	lee Jones <lee@kernel.org>, Pavel Machek <pavel@kernel.org>,
	Jonathan Brophy <professor_jonny@hotmail.com>,
	Rob Herring <robh@kernel.org>,
	Krzysztof Kozlowski <krzk+dt@kernel.org>,
	Conor Dooley <conor+dt@kernel.org>,
	Radoslav Tsvetkov <rtsvetkov@gradotech.eu>
Cc: devicetree@vger.kernel.org, linux-kernel@vger.kernel.org,
	linux-leds@vger.kernel.org
Subject: Re: [PATCH v2 1/4] dt-bindings: leds: Add YAML bindings for Virtual Color LED Group driver
Date: Tue, 14 Oct 2025 01:41:47 +0200	[thread overview]
Message-ID: <8c3796eb-63d0-4650-b296-60894461a806@kernel.org> (raw)
In-Reply-To: <20251013120955.227572-2-professorjonny98@gmail.com>

On 13/10/2025 14:09, Jonathan Brophy wrote:
> From: Jonathan Brophy <professor_jonny@hotmail.com>
> 
> Document Virtual Color device tree bindings.

I don't see how you answered my comment about missing justification.

Rob's questions also were not answered.

Few minor things follow up, but considering missing reasoning I did not
perform full review.

A nit, subject: drop second/last, redundant "YAML bindings for". The
"dt-bindings" prefix is already stating that these are bindings.
See also:
https://elixir.bootlin.com/linux/v6.17-rc3/source/Documentation/devicetree/bindings/submitting-patches.rst#L18

... and driver. Again - explain the hardware. Bindings are not for driver.

> 
> Co-developed-by: Radoslav Tsvetkov <rtsvetkov@gradotech.eu>
> Signed-off-by: Radoslav Tsvetkov <rtsvetkov@gradotech.eu>
> Signed-off-by: Jonathan Brophy <professor_jonny@hotmail.com>
> ---
>  .../leds/leds-group-virtualcolor.yaml         | 100 ++++++++++++++++++
>  1 file changed, 100 insertions(+)
>  create mode 100644 Documentation/devicetree/bindings/leds/leds-group-virtualcolor.yaml
> 
> diff --git a/Documentation/devicetree/bindings/leds/leds-group-virtualcolor.yaml b/Documentation/devicetree/bindings/leds/leds-group-virtualcolor.yaml
> new file mode 100644
> index 000000000000..bafdd8fb9557
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/leds/leds-group-virtualcolor.yaml
> @@ -0,0 +1,100 @@
> +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
> +%YAML 1.2
> +---
> +$id: http://devicetree.org/schemas/leds/leds-group-virtualcolor.yaml#
> +$schema: http://devicetree.org/meta-schemas/core.yaml#
> +
> +title: Common properties for virtualcolor led class
> +
> +maintainers:
> +  - Radoslav Tsvetkov <rtsvetkov@gradotech.eu>
> +
> +description: |
> +  Bindings to show how to achieve logically grouped virtual LEDs.
> +  The nodes and properties defined in this document are unique to the
> +  virtualcolor LED class.

That's completely redundant statement.

> +  Common LED nodes and properties are inherited from the common.yaml
> +  within this documentation directory

As well drop. Your description is pretty obvious and does not help at all.

> +
> +allOf:
> +  - $ref: common.yaml#
> +
> +properties:
> +  compatible:
> +    const: leds-group-virtualcolor
> +
> +  '#address-cells':
> +    const: 1
> +
> +  '#size-cells':
> +    const: 0
> +
> +required:
> +  - compatible
> +
> +patternProperties:
> +  '^led@[0-9a-f]$':
> +    type: object
> +    $ref: common.yaml#

Missing unevaluatedProperties: false.

> +    properties:
> +      reg:
> +        maxItems: 1
> +        description: Virtual LED number
> +
> +      leds:
> +        $ref: /schemas/types.yaml#/definitions/phandle-array
> +        description: List of phandles to the monochromatic LEDs to group
> +
> +      function:
> +        description: |
> +          For virtualcolor LEDs this property should be defined as
> +          LED_FUNCTION_VIRTUAL_STATUS as outlined in:
> +          include/dt-bindings/leds/common.h.
> +
> +      priority:
> +        $ref: /schemas/types.yaml#/definitions/uint32
> +        description: Priority level for LED activation
> +          (higher value means higher priority)
> +
> +      blink-delay-on:
> +        $ref: /schemas/types.yaml#/definitions/uint32
> +        description: Time in milliseconds the LED is on during blink
> +
> +      blink-delay-off:
> +        $ref: /schemas/types.yaml#/definitions/uint32
> +        description: Time in milliseconds the LED is off during blink
> +        note: Setting just one of the blink delays to a valid value while
> +          setting the other to null will cause the LED to operate with a one-shot
> +          on or off delay instead of a repeat cycle.


And drop all above, except reg and leds. If these are new properties,
then you need to use proper unit suffixes.

https://github.com/devicetree-org/dt-schema/blob/main/dtschema/schemas/property-units.yaml

Best regards,
Krzysztof

  reply	other threads:[~2025-10-13 23:41 UTC|newest]

Thread overview: 11+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2025-10-13 12:09 [PATCH v2 0/4] leds: Add a virtual LED driver for groups of Jonathan Brophy
2025-10-13 12:09 ` [PATCH v2 1/4] dt-bindings: leds: Add YAML bindings for Virtual Color LED Group driver Jonathan Brophy
2025-10-13 23:41   ` Krzysztof Kozlowski [this message]
2025-10-14  3:08     ` Jonathan Brophy
2025-10-14  8:19       ` Krzysztof Kozlowski
2025-10-14 16:35   ` Rob Herring (Arm)
2025-10-13 12:09 ` [PATCH v2 2/4] ABI: sysfs-class-leds-virtualcolor: Document sysfs Jonathan Brophy
2025-10-13 12:09 ` [PATCH v2 3/4] dt-bindings: led: add virtual LED bindings Jonathan Brophy
2025-10-13 12:09 ` [PATCH v2 4/4] leds: Add Virtual Color LED Group driver Jonathan Brophy
2025-10-13 15:39   ` Thomas Weißschuh
2025-10-23 14:48   ` Dan Carpenter

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=8c3796eb-63d0-4650-b296-60894461a806@kernel.org \
    --to=krzk@kernel.org \
    --cc=conor+dt@kernel.org \
    --cc=devicetree@vger.kernel.org \
    --cc=krzk+dt@kernel.org \
    --cc=lee@kernel.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-leds@vger.kernel.org \
    --cc=pavel@kernel.org \
    --cc=professor_jonny@hotmail.com \
    --cc=professorjonny98@gmail.com \
    --cc=robh@kernel.org \
    --cc=rtsvetkov@gradotech.eu \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox

all inboxes | Powered by JetHome®