From: Minda Chen <minda.chen@starfivetech.com>
To: "Conor Dooley" <conor@kernel.org>,
"Krzysztof Wilczyński" <kw@linux.com>,
"Rob Herring" <robh+dt@kernel.org>,
"Bjorn Helgaas" <bhelgaas@google.com>,
"Lorenzo Pieralisi" <lpieralisi@kernel.org>,
"Daire McNamara" <daire.mcnamara@microchip.com>,
"Emil Renner Berthing" <emil.renner.berthing@canonical.com>,
"Krzysztof Kozlowski" <krzysztof.kozlowski+dt@linaro.org>
Cc: <devicetree@vger.kernel.org>, <linux-kernel@vger.kernel.org>,
<linux-riscv@lists.infradead.org>, <linux-pci@vger.kernel.org>,
Paul Walmsley <paul.walmsley@sifive.com>,
Palmer Dabbelt <palmer@dabbelt.com>,
Albert Ou <aou@eecs.berkeley.edu>,
Philipp Zabel <p.zabel@pengutronix.de>,
Mason Huo <mason.huo@starfivetech.com>,
Leyfoon Tan <leyfoon.tan@starfivetech.com>,
Kevin Xie <kevin.xie@starfivetech.com>
Subject: Re: [PATCH v13 15/21] PCI: microchip: Add event irqchip field to host port and add PLDA irqchip
Date: Thu, 21 Dec 2023 18:56:22 +0800 [thread overview]
Message-ID: <8c417157-8884-4e91-8912-0344e71f82c2@starfivetech.com> (raw)
In-Reply-To: <20231214072839.2367-16-minda.chen@starfivetech.com>
On 2023/12/14 15:28, Minda Chen wrote:
> PolarFire PCIE event IRQs includes PLDA local interrupts and PolarFire
> their own IRQs. PolarFire PCIe event irq_chip ops using an event_desc to
> unify different IRQ register addresses. On PLDA sides, PLDA irqchip codes
> only require to set PLDA local interrupt register. So the PLDA irqchip ops
> codes can not be extracted from PolarFire codes.
>
> To support PLDA its own event IRQ process, implements PLDA irqchip ops and
> add event irqchip field to struct pcie_plda_rp.
>
> Signed-off-by: Minda Chen <minda.chen@starfivetech.com>
> ---
> .../pci/controller/plda/pcie-microchip-host.c | 65 ++++++++++++++++++-
> drivers/pci/controller/plda/pcie-plda.h | 3 +
> 2 files changed, 67 insertions(+), 1 deletion(-)
>
Hi Conor
Could you take time to review this patch? For I using event irq chip instead of event ops and the whole patch have been changed. I think it's better
And I added the implementation of PLDA event irqchip and make it easier to claim the necessity of the modification.
If you approve this, I will add back the review tag. Thanks
Hi Lorenzo
Have you reviewed this patch? Does the commit message and the codes are can be approved ?Thanks
> diff --git a/drivers/pci/controller/plda/pcie-microchip-host.c b/drivers/pci/controller/plda/pcie-microchip-host.c
> index fd0d92c3d03f..ff40c1622173 100644
> --- a/drivers/pci/controller/plda/pcie-microchip-host.c
> +++ b/drivers/pci/controller/plda/pcie-microchip-host.c
> @@ -771,6 +771,63 @@ static struct irq_chip mc_event_irq_chip = {
> .irq_unmask = mc_unmask_event_irq,
> };
> > +static u32 plda_hwirq_to_mask(int hwirq)
> +{
> + u32 mask;
> +
> + if (hwirq < EVENT_PM_MSI_INT_INTX)
> + mask = BIT(hwirq + A_ATR_EVT_POST_ERR_SHIFT);
> + else if (hwirq == EVENT_PM_MSI_INT_INTX)
> + mask = PM_MSI_INT_INTX_MASK;
> + else
> + mask = BIT(hwirq + PM_MSI_TO_MASK_OFFSET);
> +
> + return mask;
> +}
> +
> +static void plda_ack_event_irq(struct irq_data *data)
> +{
> + struct plda_pcie_rp *port = irq_data_get_irq_chip_data(data);
> +
> + writel_relaxed(plda_hwirq_to_mask(data->hwirq),
> + port->bridge_addr + ISTATUS_LOCAL);
> +}
> +
> +static void plda_mask_event_irq(struct irq_data *data)
> +{
> + struct plda_pcie_rp *port = irq_data_get_irq_chip_data(data);
> + u32 mask, val;
> +
> + mask = plda_hwirq_to_mask(data->hwirq);
> +
> + raw_spin_lock(&port->lock);
> + val = readl_relaxed(port->bridge_addr + IMASK_LOCAL);
> + val &= ~mask;
> + writel_relaxed(val, port->bridge_addr + IMASK_LOCAL);
> + raw_spin_unlock(&port->lock);
> +}
> +
> +static void plda_unmask_event_irq(struct irq_data *data)
> +{
> + struct plda_pcie_rp *port = irq_data_get_irq_chip_data(data);
> + u32 mask, val;
> +
> + mask = plda_hwirq_to_mask(data->hwirq);
> +
> + raw_spin_lock(&port->lock);
> + val = readl_relaxed(port->bridge_addr + IMASK_LOCAL);
> + val |= mask;
> + writel_relaxed(val, port->bridge_addr + IMASK_LOCAL);
> + raw_spin_unlock(&port->lock);
> +}
> +
> +static struct irq_chip plda_event_irq_chip = {
> + .name = "PLDA PCIe EVENT",
> + .irq_ack = plda_ack_event_irq,
> + .irq_mask = plda_mask_event_irq,
> + .irq_unmask = plda_unmask_event_irq,
> +};
> +
> static const struct plda_event_ops plda_event_ops = {
> .get_events = plda_get_events,
> };
> @@ -778,7 +835,9 @@ static const struct plda_event_ops plda_event_ops = {
> static int plda_pcie_event_map(struct irq_domain *domain, unsigned int irq,
> irq_hw_number_t hwirq)
> {
> - irq_set_chip_and_handler(irq, &mc_event_irq_chip, handle_level_irq);
> + struct plda_pcie_rp *port = (void *)domain->host_data;
> +
> + irq_set_chip_and_handler(irq, port->event_irq_chip, handle_level_irq);
> irq_set_chip_data(irq, domain->host_data);
>
> return 0;
> @@ -963,6 +1022,9 @@ static int plda_init_interrupts(struct platform_device *pdev,
> if (!port->event_ops)
> port->event_ops = &plda_event_ops;
>
> + if (!port->event_irq_chip)
> + port->event_irq_chip = &plda_event_irq_chip;
> +
> ret = plda_pcie_init_irq_domains(port);
> if (ret) {
> dev_err(dev, "failed creating IRQ domains\n");
> @@ -1040,6 +1102,7 @@ static int mc_platform_init(struct pci_config_window *cfg)
> return ret;
>
> port->plda.event_ops = &mc_event_ops;
> + port->plda.event_irq_chip = &mc_event_irq_chip;
>
> /* Address translation is up; safe to enable interrupts */
> ret = plda_init_interrupts(pdev, &port->plda, &mc_event);
> diff --git a/drivers/pci/controller/plda/pcie-plda.h b/drivers/pci/controller/plda/pcie-plda.h
> index dd8bc2750bfc..24ac50c458dc 100644
> --- a/drivers/pci/controller/plda/pcie-plda.h
> +++ b/drivers/pci/controller/plda/pcie-plda.h
> @@ -128,6 +128,8 @@
> * DMA end : reserved for vendor implement
> */
>
> +#define PM_MSI_TO_MASK_OFFSET 19
> +
> struct plda_pcie_rp;
>
> struct plda_event_ops {
> @@ -150,6 +152,7 @@ struct plda_pcie_rp {
> raw_spinlock_t lock;
> struct plda_msi msi;
> const struct plda_event_ops *event_ops;
> + const struct irq_chip *event_irq_chip;
> void __iomem *bridge_addr;
> int num_events;
> };
next prev parent reply other threads:[~2023-12-21 10:56 UTC|newest]
Thread overview: 44+ messages / expand[flat|nested] mbox.gz Atom feed top
2023-12-14 7:28 [PATCH v13 0/21] Refactoring Microchip PCIe driver and add StarFive PCIe Minda Chen
2023-12-14 7:28 ` [PATCH v13 01/21] dt-bindings: PCI: Add PLDA XpressRICH PCIe host common properties Minda Chen
2023-12-14 7:28 ` [PATCH v13 02/21] PCI: microchip: Move pcie-microchip-host.c to plda directory Minda Chen
2023-12-14 7:28 ` [PATCH v13 03/21] PCI: microchip: Move PLDA IP register macros to pcie-plda.h Minda Chen
2023-12-14 7:28 ` [PATCH v13 04/21] PCI: microchip: Add bridge_addr field to struct mc_pcie Minda Chen
2023-12-14 7:28 ` [PATCH v13 05/21] PCI: microchip: Rename two PCIe data structures Minda Chen
2023-12-14 7:28 ` [PATCH v13 06/21] PCI: microchip: Move PCIe host data structures to plda-pcie.h Minda Chen
2023-12-14 7:28 ` [PATCH v13 07/21] PCI: microchip: Rename two setup functions Minda Chen
2023-12-14 7:28 ` [PATCH v13 08/21] PCI: microchip: Change the argument of plda_pcie_setup_iomems() Minda Chen
2023-12-14 7:28 ` [PATCH v13 09/21] PCI: microchip: Move setup functions to pcie-plda-host.c Minda Chen
2023-12-27 15:49 ` Lorenzo Pieralisi
2023-12-28 9:46 ` Minda Chen
2023-12-14 7:28 ` [PATCH v13 10/21] PCI: microchip: Rename interrupt related functions Minda Chen
2023-12-27 15:52 ` Lorenzo Pieralisi
2023-12-29 3:44 ` Minda Chen
2023-12-14 7:28 ` [PATCH v13 11/21] PCI: microchip: Add num_events field to struct plda_pcie_rp Minda Chen
2023-12-27 15:55 ` Lorenzo Pieralisi
2023-12-29 3:46 ` Minda Chen
2023-12-14 7:28 ` [PATCH v13 12/21] PCI: microchip: Add request_event_irq() callback function Minda Chen
2023-12-27 16:01 ` Lorenzo Pieralisi
2023-12-28 11:58 ` Minda Chen
2023-12-14 7:28 ` [PATCH v13 13/21] PCI: microchip: Add INTx and MSI event num to struct plda_event Minda Chen
2023-12-14 7:28 ` [PATCH v13 14/21] PCI: microchip: Add get_events() callback and add PLDA get_event() Minda Chen
2023-12-27 16:31 ` Lorenzo Pieralisi
2023-12-28 10:04 ` Minda Chen
2023-12-14 7:28 ` [PATCH v13 15/21] PCI: microchip: Add event irqchip field to host port and add PLDA irqchip Minda Chen
2023-12-21 10:56 ` Minda Chen [this message]
2023-12-21 15:32 ` Lorenzo Pieralisi
2023-12-22 11:18 ` Minda Chen
2023-12-27 12:43 ` Lorenzo Pieralisi
2023-12-28 11:25 ` Minda Chen
2023-12-14 7:28 ` [PATCH v13 16/21] PCI: microchip: Move IRQ functions to pcie-plda-host.c Minda Chen
2023-12-14 7:28 ` [PATCH v13 17/21] PCI: plda: Add host init/deinit and map bus functions Minda Chen
2023-12-14 7:28 ` [PATCH v13 18/21] dt-bindings: PCI: Add StarFive JH7110 PCIe controller Minda Chen
2023-12-14 7:28 ` [PATCH v13 19/21] PCI: Add PCIE_RESET_CONFIG_DEVICE_WAIT_MS waiting time value Minda Chen
2023-12-27 16:03 ` Lorenzo Pieralisi
2023-12-27 19:08 ` Bjorn Helgaas
2023-12-14 7:28 ` [PATCH v13 20/21] PCI: starfive: Add JH7110 PCIe controller Minda Chen
2023-12-14 7:28 ` [PATCH v13 21/21] riscv: dts: starfive: add PCIe dts configuration for JH7110 Minda Chen
2024-01-03 22:40 ` [PATCH v13 0/21] Refactoring Microchip PCIe driver and add StarFive PCIe Kevin Hilman
2024-01-05 2:35 ` 回复: " Kevin Xie
2024-01-05 17:28 ` Kevin Hilman
2024-01-08 10:48 ` 回复: " Kevin Xie
2024-01-10 16:29 ` Emil Renner Berthing
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=8c417157-8884-4e91-8912-0344e71f82c2@starfivetech.com \
--to=minda.chen@starfivetech.com \
--cc=aou@eecs.berkeley.edu \
--cc=bhelgaas@google.com \
--cc=conor@kernel.org \
--cc=daire.mcnamara@microchip.com \
--cc=devicetree@vger.kernel.org \
--cc=emil.renner.berthing@canonical.com \
--cc=kevin.xie@starfivetech.com \
--cc=krzysztof.kozlowski+dt@linaro.org \
--cc=kw@linux.com \
--cc=leyfoon.tan@starfivetech.com \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-pci@vger.kernel.org \
--cc=linux-riscv@lists.infradead.org \
--cc=lpieralisi@kernel.org \
--cc=mason.huo@starfivetech.com \
--cc=p.zabel@pengutronix.de \
--cc=palmer@dabbelt.com \
--cc=paul.walmsley@sifive.com \
--cc=robh+dt@kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox
all inboxes | Powered by JetHome®