From: Hans de Goede <hdegoede@redhat.com>
To: Heikki Krogerus <heikki.krogerus@linux.intel.com>
Cc: Guenter Roeck <linux@roeck-us.net>,
Andy Shevchenko <andriy.shevchenko@linux.intel.com>,
MyungJoo Ham <myungjoo.ham@samsung.com>,
Chanwoo Choi <cw00.choi@samsung.com>,
"linux-kernel@vger.kernel.org" <linux-kernel@vger.kernel.org>
Subject: Re: [PATCH 2/5] extcon: Add FUSB302 USB TYPE-C controller support
Date: Wed, 17 May 2017 00:24:52 +0200 [thread overview]
Message-ID: <8c45819c-1738-dc95-35ad-b6ba37f8f418@redhat.com> (raw)
In-Reply-To: <20170516120705.GC5322@kuha.fi.intel.com>
Hi,
On 05/16/2017 02:07 PM, Heikki Krogerus wrote:
> Hi Hans,
>
> On Fri, May 12, 2017 at 11:22:46PM +0200, Hans de Goede wrote:
<snip>
>> To me making the combination of the 2 sources the problem
>> of the consumer seems just wrong, as you mentioned
>> above there should really be only one extcon for the
>> connector, likewise their should be only one definitive
>> source on what the input current limit is.
>
> Why? The consumer driver, bq24290 in this case, does not need to
> understand it has multiple sources. It will just react to events from
> *a* source, and the psy framework takes care of everything else. The
> psy framework will need some tuning, but that should not be a problem.
> I'm preparing support for _PCL (power consumer list) ACPI method
> handling for the psy framework, so I have some patches already. The
> idea is that in the future USB ports could have virtual power source
> object with _PCL.
>
> This is in any case separate issue compared to the problem of telling
> the BC1.2 detection to start in case of TYPEC_CC_RP_DEF.
>
>> TL;DR: We need some way to combine the current limit info
>> from TYPE-C and USB-2 BC detection into a single source and
>> to propagate that current to drivers which can actually set
>> the current-limit.
>>
>> Note I'm happy to use something else then extcon for this,
>> but we do need some way to combine + propagate the
>> current-limit.
>
> That must be handled using psy framework. Otherwise we'll just be
> trying to re-invent the wheel. There is no problem for a consumer to
> have multiple sources.
But we don't really have multiple sources here, we have only
one source, the USB-C cable hooked to an external power-supply.
Just because 2 different pieces of hardware may be involved in
determining the current limit does not mean that we should
model this as 2 different sources. Just as you rightfully
pointed out that me using 2 extcon devices for the single
Type-C connector is wrong, modelling it as 2 sources is
wrong too.
<snip>
> Back to this topic. I can see at least the following problems:
>
> 1. Tell the BC1.2 detection to start from fusb302 driver
> 2. Deliver the power limits to the discrete charger ic or battery driver
> 3. Tell what ever regulates VBUS to start driving VBUS.
>
> You are trying to solve everything using extcon, and that is wrong.
As indicated I'm not stuck on using extcon, I started using it
in my paches because it is used to set the current limit in some
other places already, but I'm fine with using something else.
> The second problem definitely needs to be handled using psy framework.
> The psy framework provides already everything needed for that.
So above you're talking about sources to the bq24190, which if
I understand you correctly suggest that you want the tcpm code to
register a power-supply device per Type-C port ? I'm not sure that
is a good idea, any registered power-supply devices will show up
under /sys/class/power_supply, currently on a typical system
there will be 2 entries under /sys/class/power_supply one for
the "Mains" or USB power input and one for the battery, adding
more entries there is likely to confuse userspace.
More in general having 2 power-supply devices for what is
in essence one power-input feels wrong.
We can still use the power-supply framework, but I would
envision this working like this:
The platform code which enumerates the type-c controller
sets a "input-current-power-supply-name" string device-property
on the tcpm's (parent)device. When this is set the tpcm code
will do a power_supply_get_by_name and set the input
current on the returned power_supply by setting the
POWER_SUPPLY_PROP_INPUT_CURRENT_LIMIT property.
For 3. (vbus) we could do something similar using a
"vbus-regulator-id" device-property and the regulator
framework, making the driver which controls Vbus register
itself as a regulator.
I can take a shot at implementing both suggestions, but
first lets try to get some general idea of how we want
to solve this.
Regards,
Hans
next prev parent reply other threads:[~2017-05-16 22:25 UTC|newest]
Thread overview: 26+ messages / expand[flat|nested] mbox.gz Atom feed top
[not found] <CGME20170421130123epcas4p12e891d305aa2b4126089e691d15c6659@epcas4p1.samsung.com>
2017-04-21 13:01 ` [PATCH 1/5] extcon: Allow extcon drivers to specify the extcon name Hans de Goede
2017-04-21 13:01 ` [PATCH 2/5] extcon: Add FUSB302 USB TYPE-C controller support Hans de Goede
2017-04-21 18:51 ` Andy Shevchenko
2017-04-24 11:02 ` Heikki Krogerus
2017-04-24 13:12 ` Guenter Roeck
2017-05-12 21:22 ` Hans de Goede
2017-05-16 12:07 ` Heikki Krogerus
2017-05-16 22:24 ` Hans de Goede [this message]
2017-05-17 11:45 ` Heikki Krogerus
2017-05-17 14:47 ` USB TYPE-C support and the power-supply subsys (was Re: [PATCH 2/5] extcon: Add FUSB302 USB TYPE-C controller support) Hans de Goede
2017-05-18 8:37 ` Heikki Krogerus
2017-05-18 11:50 ` Heikki Krogerus
2017-05-19 20:12 ` Hans de Goede
2017-05-19 20:15 ` Hans de Goede
2017-05-22 14:56 ` Heikki Krogerus
2017-05-16 22:52 ` [PATCH 2/5] extcon: Add FUSB302 USB TYPE-C controller support Guenter Roeck
2017-04-21 23:23 ` kbuild test robot
2017-05-23 9:27 ` Chanwoo Choi
2017-05-24 12:23 ` Andy Shevchenko
2017-04-21 13:01 ` [PATCH 3/5] extcon: intel-cht-wc: Default to SDP on regmap io errors Hans de Goede
2017-04-21 13:01 ` [PATCH 4/5] extcon: intel-cht-wc: Add new cht_wc_extcon_set_state helper Hans de Goede
2017-04-21 18:54 ` Andy Shevchenko
2017-04-21 13:01 ` [PATCH 5/5] extcon: intel-cht-wc: Add support for monitoring external USB Type-C controller Hans de Goede
2017-04-21 18:55 ` Andy Shevchenko
2017-04-24 14:25 ` Heikki Krogerus
2017-05-23 9:26 ` [PATCH 1/5] extcon: Allow extcon drivers to specify the extcon name Chanwoo Choi
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=8c45819c-1738-dc95-35ad-b6ba37f8f418@redhat.com \
--to=hdegoede@redhat.com \
--cc=andriy.shevchenko@linux.intel.com \
--cc=cw00.choi@samsung.com \
--cc=heikki.krogerus@linux.intel.com \
--cc=linux-kernel@vger.kernel.org \
--cc=linux@roeck-us.net \
--cc=myungjoo.ham@samsung.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox
all inboxes | Powered by JetHome®