From: Andre Przywara <andre.przywara@arm.com>
To: icenowy@aosc.io, Thomas Gleixner <tglx@linutronix.de>,
Rob Herring <robh+dt@kernel.org>,
Maxime Ripard <maxime.ripard@free-electrons.com>,
Chen-Yu Tsai <wens@csie.org>, Lee Jones <lee.jones@linaro.org>,
Liam Girdwood <lgirdwood@gmail.com>
Cc: linux-kernel@vger.kernel.org, devicetree@vger.kernel.org,
linux-arm-kernel@lists.infradead.org,
linux-sunxi@googlegroups.com
Subject: Re: [linux-sunxi] [PATCH v4 09/10] arm64: allwinner: a64: enable AXP803 regulators for Pine64
Date: Tue, 25 Apr 2017 10:24:13 +0100 [thread overview]
Message-ID: <8c7864f1-a0d7-b87f-f9d6-5201cc773609@arm.com> (raw)
In-Reply-To: <20170424160103.9447-10-icenowy@aosc.io>
Hi,
On 24/04/17 17:01, Icenowy Zheng wrote:
> Add support of AXP803 regulators in the Pine64 device tree, in order to
> enable many future functionalities, e.g. Wi-Fi.
In general that's quite some code to just achieve some device power
plane switching, but that's another discussion, I guess ;-)
To me this patch here like a lot of churn to be duplicated in each
board's DT.
Can't we provide some sane defaults, either in axp803.dtsi or in an
extra file (allwinner-ref-axp803.dtsi?), and only overwrite them in a
board's DT if a board deviates?
Because it seems like many boards are actually based on some Allwinner
reference design and use very similar, if not identical settings.
Also one thing below ...
>
> Signed-off-by: Icenowy Zheng <icenowy@aosc.io>
> ---
> .../arm64/boot/dts/allwinner/sun50i-a64-pine64.dts | 109 +++++++++++++++++++++
> 1 file changed, 109 insertions(+)
>
> diff --git a/arch/arm64/boot/dts/allwinner/sun50i-a64-pine64.dts b/arch/arm64/boot/dts/allwinner/sun50i-a64-pine64.dts
> index 3e1b44292534..abc1879e91f2 100644
> --- a/arch/arm64/boot/dts/allwinner/sun50i-a64-pine64.dts
> +++ b/arch/arm64/boot/dts/allwinner/sun50i-a64-pine64.dts
> @@ -106,6 +106,115 @@
> };
> };
>
> +#include "axp803.dtsi"
> +
> +®_aldo1 {
> + regulator-min-microvolt = <2800000>;
> + regulator-max-microvolt = <2800000>;
> + regulator-name = "vcc-csi";
> +};
> +
> +®_aldo2 {
> + regulator-always-on;
> + regulator-min-microvolt = <1800000>;
> + regulator-max-microvolt = <3300000>;
> + regulator-name = "vcc-pl";
> +};
> +
> +®_aldo3 {
> + regulator-always-on;
> + regulator-min-microvolt = <2700000>;
> + regulator-max-microvolt = <3300000>;
> + regulator-name = "vcc-pll-avcc";
> +};
> +
> +®_dc1sw {
> + regulator-name = "vcc-phy";
> +};
> +
> +®_dcdc1 {
> + regulator-always-on;
> + regulator-min-microvolt = <3300000>;
> + regulator-max-microvolt = <3300000>;
> + regulator-name = "vcc-3v3";
> +};
> +
> +®_dcdc2 {
> + regulator-always-on;
> + regulator-min-microvolt = <1000000>;
> + regulator-max-microvolt = <1300000>;
> + regulator-name = "vdd-cpux";
> +};
> +
> +/* DCDC3 is polyphased with DCDC2 */
> +
> +®_dcdc5 {
> + regulator-always-on;
> + regulator-min-microvolt = <1500000>;
> + regulator-max-microvolt = <1500000>;
On the Pine64 there is DDR3L DRAM, running at 1.35V.
Cheers,
Andre.
> + regulator-name = "vcc-dram";
> +};
> +
> +®_dcdc6 {
> + regulator-always-on;
> + regulator-min-microvolt = <1100000>;
> + regulator-max-microvolt = <1100000>;
> + regulator-name = "vdd-sys";
> +};
> +
> +®_dldo1 {
> + regulator-min-microvolt = <3300000>;
> + regulator-max-microvolt = <3300000>;
> + regulator-name = "vcc-hdmi";
> +};
> +
> +®_dldo2 {
> + regulator-min-microvolt = <3300000>;
> + regulator-max-microvolt = <3300000>;
> + regulator-name = "vcc-mipi";
> +};
> +
> +®_dldo3 {
> + regulator-min-microvolt = <3300000>;
> + regulator-max-microvolt = <3300000>;
> + regulator-name = "avdd-csi";
> +};
> +
> +®_dldo4 {
> + regulator-min-microvolt = <3300000>;
> + regulator-max-microvolt = <3300000>;
> + regulator-name = "vcc-wifi";
> +};
> +
> +®_eldo1 {
> + regulator-min-microvolt = <1800000>;
> + regulator-max-microvolt = <1800000>;
> + regulator-name = "cpvdd";
> +};
> +
> +®_eldo3 {
> + regulator-min-microvolt = <1800000>;
> + regulator-max-microvolt = <1800000>;
> + regulator-name = "vdd-1v8-csi";
> +};
> +
> +®_fldo1 {
> + regulator-min-microvolt = <1200000>;
> + regulator-max-microvolt = <1200000>;
> + regulator-name = "vcc-1v2-hsic";
> +};
> +
> +®_fldo2 {
> + regulator-always-on;
> + regulator-min-microvolt = <1100000>;
> + regulator-max-microvolt = <1100000>;
> + regulator-name = "vdd-cpus";
> +};
> +
> +®_rtc_ldo {
> + regulator-name = "vcc-rtc";
> +};
> +
> &uart0 {
> pinctrl-names = "default";
> pinctrl-0 = <&uart0_pins_a>;
>
next prev parent reply other threads:[~2017-04-25 9:22 UTC|newest]
Thread overview: 18+ messages / expand[flat|nested] mbox.gz Atom feed top
2017-04-24 16:00 [PATCH v4 00/10] AXP803 PMIC support " Icenowy Zheng
2017-04-24 16:00 ` [PATCH v4 01/10] arm64: allwinner: a64: enable RSB on A64 Icenowy Zheng
2017-04-24 16:00 ` [PATCH v4 02/10] irqchip/sunxi-nmi: add A64 R_INTC to the binding doc Icenowy Zheng
2017-04-24 16:00 ` [PATCH v4 03/10] irqchip/sunxi-nmi: add support for the NMI in A64 R_INTC Icenowy Zheng
2017-04-24 16:11 ` icenowy
2017-04-24 16:00 ` [PATCH v4 04/10] arm64: allwinner: a64: add NMI (R_INTC) controller on A64 Icenowy Zheng
2017-04-24 16:00 ` [PATCH v4 05/10] arm64: allwinner: a64: add AXP803 node to Pine64 device tree Icenowy Zheng
2017-04-24 16:00 ` [PATCH v4 06/10] regulator: axp20x-regulator: add support for AXP803 Icenowy Zheng
2017-04-24 16:01 ` [PATCH v4 07/10] mfd: axp20x: add axp20x-regulator cell " Icenowy Zheng
2017-04-25 2:17 ` [linux-sunxi] " Chen-Yu Tsai
2017-04-25 5:47 ` icenowy
2017-04-25 7:57 ` Lee Jones
2017-04-25 8:37 ` [linux-sunxi] " Icenowy Zheng
2017-04-24 16:01 ` [PATCH v4 08/10] arm64: allwinner: a64: add DTSI file for AXP803 PMIC Icenowy Zheng
2017-04-24 16:01 ` [PATCH v4 09/10] arm64: allwinner: a64: enable AXP803 regulators for Pine64 Icenowy Zheng
2017-04-25 9:24 ` Andre Przywara [this message]
2017-04-25 9:28 ` [linux-sunxi] " Icenowy Zheng
2017-04-24 16:01 ` [PATCH v4 10/10] arm64: allwinner: a64: enable Wi-Fi " Icenowy Zheng
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=8c7864f1-a0d7-b87f-f9d6-5201cc773609@arm.com \
--to=andre.przywara@arm.com \
--cc=devicetree@vger.kernel.org \
--cc=icenowy@aosc.io \
--cc=lee.jones@linaro.org \
--cc=lgirdwood@gmail.com \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-sunxi@googlegroups.com \
--cc=maxime.ripard@free-electrons.com \
--cc=robh+dt@kernel.org \
--cc=tglx@linutronix.de \
--cc=wens@csie.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox
all inboxes | Powered by JetHome®