Re: BUG: scsi/qla2xxx: BUG_ON(blk_queued_rq(req) is triggered in blk_finish_request

["jianchao.wang" <jianchao.w.wang@oracle.com>]

Would anyone please take a look at this ?

Thanks in advance
Jianchao

On 05/23/2018 11:55 AM, jianchao.wang wrote:
> 
> 
> Hi all
> 
> Our customer met a panic triggered by BUG_ON in blk_finish_request.
>>From the dmesg log, the BUG_ON was triggered after command abort occurred many times.
> There is a race condition in the following scenario.
> 
> cpu A                                   cpu B
> kworker                                 interrupt
>                                                  
> scmd_eh_abort_handler()                               
>   -> scsi_try_to_abort_cmd()
>     -> qla2xxx_eh_abort()                        
>       -> qla2x00_eh_wait_on_command()   qla2x00_status_entry()   
>                                           -> qla2x00_sp_compl()
>                                             -> qla2x00_sp_free_dma()
>   -> scsi_queue_insert()                          
>     -> __scsi_queue_insert()                         
>       -> blk_requeue_request()
>         -> blk_clear_rq_complete()
>                                             -> scsi_done
>                                               -> blk_complete_request
>                                                 -> blk_mark_rq_complete       
>           -> elv_requeue_request()              -> __blk_complete_request()
>             -> __elv_add_request()
>             // req will be queued here                                                         
>                                                     BLK_SOFTIRQ
>                                                     scsi_softirq_done()
>                                                       -> scsi_finish_command()
>                                                         -> scsi_io_completion()
>                                                           -> scsi_end_request()
>                                                             -> blk_finish_request()  // BUG_ON(blk_queued_rq(req)) !!!
> 
> The issue will not be triggered most of time, because the request is marked as complete by timeout path.
> So the scsi_done from qla2x00_sp_compl does nothing.
> But as the scenario above, if the complete state has been cleaned by blk_requeue_request, we will get
> the request both requeued and completed, and then BUG_ON(blk_queued_rq(req)) in blk_finish_request comes up.
> 
> Is there any solution for this in qla2xxx driver side ?
> 
> Thanks
> Jianchao
> 
>