mirror of https://lore.kernel.org/lkml/
 help / color / mirror / Atom feed
From: Srinivasa Rao Mandadapu <quic_srivasam@quicinc.com>
To: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
Cc: <agross@kernel.org>, <bgoswami@quicinc.com>,
	<bjorn.andersson@linaro.org>, <broonie@kernel.org>,
	<devicetree@vger.kernel.org>, <judyhsiao@chromium.org>,
	<lgirdwood@gmail.com>, <linux-arm-msm@vger.kernel.org>,
	<linux-kernel@vger.kernel.org>,
	<linux-remoteproc@vger.kernel.org>, <perex@perex.cz>,
	<quic_plai@quicinc.com>, <quic_rohkumar@quicinc.com>,
	<robh+dt@kernel.org>, <srinivas.kandagatla@linaro.org>,
	<swboyd@chromium.org>, <tiwai@suse.com>
Subject: Re: [PATCH v4 6/7] remoteproc: qcom: Add support for memory sandbox
Date: Tue, 16 Aug 2022 15:30:49 +0530	[thread overview]
Message-ID: <8c9d82d3-eb5d-8e0c-283a-2bb5e7dc8838@quicinc.com> (raw)
In-Reply-To: <6d551cf9-94b4-653b-122a-938ee5504150@wanadoo.fr>


On 8/15/2022 12:07 PM, Christophe JAILLET wrote:
Thanks for Your time and valuable insights CJ !!!
> Le 12/08/2022 à 14:47, Srinivasa Rao Mandadapu a écrit :
>> Update pil driver with SMMU mapping for allowing authorised
>> memory access to ADSP firmware, by reading required memory
>> regions either from device tree file or from resource table
>> embedded in ADSP binary header.
>>
>> Signed-off-by: Srinivasa Rao Mandadapu 
>> <quic_srivasam-jfJNa2p1gH1BDgjK7y7TUQ@public.gmane.org>
>> ---
>> Changes since V3:
>>     -- Rename is_adsp_sb_needed to adsp_sandbox_needed.
>>     -- Add smmu unmapping in error case and in adsp stop.
>> Changes since V2:
>>     -- Replace platform_bus_type with adsp->dev->bus.
>>     -- Use API of_parse_phandle_with_args() instead of 
>> of_parse_phandle_with_fixed_args().
>>     -- Replace adsp->is_wpss with adsp->is_adsp.
>>     -- Update error handling in adsp_start().
>>
>>   drivers/remoteproc/qcom_q6v5_adsp.c | 172 
>> +++++++++++++++++++++++++++++++++++-
>>   1 file changed, 170 insertions(+), 2 deletions(-)
>>
>> diff --git a/drivers/remoteproc/qcom_q6v5_adsp.c 
>> b/drivers/remoteproc/qcom_q6v5_adsp.c
>> index b0a63a0..ca45d2c 100644
>> --- a/drivers/remoteproc/qcom_q6v5_adsp.c
>> +++ b/drivers/remoteproc/qcom_q6v5_adsp.c
>> @@ -9,6 +9,7 @@
>>   #include <linux/firmware.h>
>>   #include <linux/interrupt.h>
>>   #include <linux/io.h>
>> +#include <linux/iommu.h>
>>   #include <linux/iopoll.h>
>>   #include <linux/kernel.h>
>>   #include <linux/mfd/syscon.h>
>> @@ -48,6 +49,8 @@
>>   #define LPASS_PWR_ON_REG        0x10
>>   #define LPASS_HALTREQ_REG        0x0
>>   +#define SID_MASK_DEFAULT        0xF
>> +
>>   #define QDSP6SS_XO_CBCR        0x38
>>   #define QDSP6SS_CORE_CBCR    0x20
>>   #define QDSP6SS_SLEEP_CBCR    0x3c
>> @@ -78,7 +81,7 @@ struct adsp_pil_data {
>>   struct qcom_adsp {
>>       struct device *dev;
>>       struct rproc *rproc;
>> -
>> +    struct iommu_domain *iommu_dom;
>>       struct qcom_q6v5 q6v5;
>>         struct clk *xo;
>> @@ -333,6 +336,155 @@ static int adsp_load(struct rproc *rproc, const 
>> struct firmware *fw)
>>       return 0;
>>   }
>>   +static void adsp_of_unmap_smmu(struct iommu_domain *iommu_dom, 
>> const __be32 *prop, int len)
>> +{
>> +    unsigned long mem_phys;
>> +    unsigned long iova;
>> +    unsigned int mem_size;
>> +    int access_level;
>> +    int i;
>> +
>> +    for (i = 0; i < len; i++) {
>> +        iova = be32_to_cpu(prop[i++]);
>> +        mem_phys = be32_to_cpu(prop[i++]);
>> +        mem_size = be32_to_cpu(prop[i++]);
>> +        access_level = be32_to_cpu(prop[i]);
>> +        iommu_unmap(iommu_dom, iova, mem_size);
>> +    }
>> +}
>> +
>> +static void adsp_rproc_unmap_smmu(struct rproc *rproc, int len)
>> +{
>> +    struct fw_rsc_devmem *rsc_fw;
>> +    struct fw_rsc_hdr *hdr;
>> +    int offset;
>> +    int i;
>> +
>> +    for (i = 0; i < len; i++) {
>> +        offset = rproc->table_ptr->offset[i];
>> +        hdr = (void *)rproc->table_ptr + offset;
>> +        rsc_fw = (struct fw_rsc_devmem *)hdr + sizeof(*hdr);
>> +
>> +        iommu_unmap(rproc->domain, rsc_fw->da, rsc_fw->len);
>> +    }
>> +}
>> +
>> +static void adsp_unmap_smmu(struct rproc *rproc)
>> +{
>
> When I proposed a adsp_unmap_smmu() function, the idea was to undo 
> everything that is donne by adsp_map_smmu().
> iommu_domain_alloc() and iommu_map(adsp->iommu_dom, ..) are not undone 
> here.
>
> If this make sense, it would improve the semantic, simplify the 
> 'adsp_smmu_unmap' label in adsp_start() and avoid what looks like a 
> leak to me in adsp_stop().
Okay. Will modify accordingly and re post it.
>
>
>> +    struct qcom_adsp *adsp = (struct qcom_adsp *)rproc->priv;
>> +    const __be32 *prop;
>> +    unsigned int len;
>> +
>> +    prop = of_get_property(adsp->dev->of_node, 
>> "qcom,adsp-memory-regions", &len);
>> +    if (prop) {
>
> In the allocation path, you have a "len /= sizeof(__be32);" which is 
> not here. Is it needed?
Yes It's missing. will ad it.
>
> You call adsp_unmap_smmu() from the error handling path of 
> adsp_map_smmu(). If needed, maybe it should be part of 
> adsp_of_unmap_smmu()?
Okay. Will modify accordingly and re post it.
>
>> + adsp_of_unmap_smmu(adsp->iommu_dom, prop, len);
>> +    } else {
>> +        if (rproc->table_ptr)
>> +            adsp_rproc_unmap_smmu(rproc, rproc->table_ptr->num);
>> +    }
>> +}
>> +
>> +static int adsp_map_smmu(struct qcom_adsp *adsp, struct rproc *rproc)
>> +{
>> +    struct of_phandle_args args;
>> +    struct fw_rsc_devmem *rsc_fw;
>> +    struct fw_rsc_hdr *hdr;
>> +    const __be32 *prop;
>> +    long long sid;
>> +    unsigned long mem_phys;
>> +    unsigned long iova;
>> +    unsigned int mem_size;
>> +    unsigned int flag;
>> +    unsigned int len;
>> +    int access_level;
>> +    int offset;
>> +    int ret;
>> +    int rc;
>
> Are ret and rc both needed?
Yes it's redundant. Will replace it with ret.
>
>> +    int i;
>> +
>> +    rc = of_parse_phandle_with_args(adsp->dev->of_node, "iommus", 
>> "#iommu-cells", 0, &args);
>> +    if (rc < 0)
>> +        sid = -1;
>> +    else
>> +        sid = args.args[0] & SID_MASK_DEFAULT;
>> +
>> +    adsp->iommu_dom = iommu_domain_alloc(adsp->dev->bus);
>> +    if (!adsp->iommu_dom) {
>> +        dev_err(adsp->dev, "failed to allocate iommu domain\n");
>> +        ret = -ENOMEM;
>> +        goto domain_free;
>> +    }
>> +
>> +    ret = iommu_attach_device(adsp->iommu_dom, adsp->dev);
>> +    if (ret) {
>> +        dev_err(adsp->dev, "could not attach device ret = %d\n", ret);
>> +        ret = -EBUSY;
>> +        goto detach_device;
>> +    }
>> +
>> +    /* Add SID configuration for ADSP Firmware to SMMU */
>> +    adsp->mem_phys =  adsp->mem_phys | (sid << 32);
>> +
>> +    ret = iommu_map(adsp->iommu_dom, adsp->mem_phys, adsp->mem_phys,
>> +            adsp->mem_size,    IOMMU_READ | IOMMU_WRITE);
>> +    if (ret) {
>> +        dev_err(adsp->dev, "Unable to map ADSP Physical Memory\n");
>> +        goto sid_unmap;
>> +    }
>> +
>> +    prop = of_get_property(adsp->dev->of_node, 
>> "qcom,adsp-memory-regions", &len);
>> +    if (prop) {
>> +        len /= sizeof(__be32);
>> +        for (i = 0; i < len; i++) {
>> +            iova = be32_to_cpu(prop[i++]);
>> +            mem_phys = be32_to_cpu(prop[i++]);
>> +            mem_size = be32_to_cpu(prop[i++]);
>> +            access_level = be32_to_cpu(prop[i]);
>> +
>> +            if (access_level)
>> +                flag = IOMMU_READ | IOMMU_WRITE;
>> +            else
>> +                flag = IOMMU_READ;
>> +
>> +            ret = iommu_map(adsp->iommu_dom, iova, mem_phys, 
>> mem_size, flag);
>> +            if (ret) {
>> +                dev_err(adsp->dev, "failed to map addr = %p mem_size 
>> = %x\n",
>> +                        &(mem_phys), mem_size);
>> +                goto smmu_unmap;
>> +            }
>> +        }
>> +    } else {
>> +        if (!rproc->table_ptr)
>> +            goto sid_unmap;
>> +
>> +        for (i = 0; i < rproc->table_ptr->num; i++) {
>> +            offset = rproc->table_ptr->offset[i];
>> +            hdr = (void *)rproc->table_ptr + offset;
>> +            rsc_fw = (struct fw_rsc_devmem *)hdr + sizeof(*hdr);
>> +
>> +            ret = iommu_map(rproc->domain, rsc_fw->da, rsc_fw->pa,
>> +                        rsc_fw->len, rsc_fw->flags);
>> +            if (ret) {
>> +                pr_err("%s; unable to map adsp memory address\n", 
>> __func__);
>> +                goto rproc_smmu_unmap;
>> +            }
>> +        }
>> +    }
>
> If you introduce a adsp_of_unmap_smmu() and adsp_rproc_unmap_smmu(), 
> would it make things more readable to have the same kind of functions 
> when allocating the resources?
>
> Symmetry often helps.
Yes, Agree.  Will update accordingly.
>
>> +    return 0;
>
> Add an empty new line here?
>
>> +rproc_smmu_unmap:
>> +    adsp_rproc_unmap_smmu(rproc, i);
>> +    goto sid_unmap;
>> +smmu_unmap:
>> +    adsp_of_unmap_smmu(adsp->iommu_dom, prop, i);
>> +sid_unmap:
>> +    iommu_unmap(adsp->iommu_dom, adsp->mem_phys, adsp->mem_size);
>> +detach_device:
>> +    iommu_domain_free(adsp->iommu_dom);
>> +domain_free:
>> +    return ret;
>> +}
>> +
>> +
>>   static int adsp_start(struct rproc *rproc)
>>   {
>>       struct qcom_adsp *adsp = (struct qcom_adsp *)rproc->priv;
>> @@ -343,9 +495,16 @@ static int adsp_start(struct rproc *rproc)
>>       if (ret)
>>           return ret;
>>   +    if (adsp->adsp_sandbox_needed) {
>> +        ret = adsp_map_smmu(adsp, rproc);
>> +        if (ret) {
>> +            dev_err(adsp->dev, "ADSP smmu mapping failed\n");
>> +            goto disable_irqs;
>> +        }
>> +    }
>>       ret = clk_prepare_enable(adsp->xo);
>>       if (ret)
>> -        goto disable_irqs;
>> +        goto adsp_smmu_unmap;
>>         ret = qcom_rproc_pds_enable(adsp, adsp->proxy_pds,
>>                       adsp->proxy_pd_count);
>> @@ -401,6 +560,12 @@ static int adsp_start(struct rproc *rproc)
>>       qcom_rproc_pds_disable(adsp, adsp->proxy_pds, 
>> adsp->proxy_pd_count);
>>   disable_xo_clk:
>>       clk_disable_unprepare(adsp->xo);
>> +adsp_smmu_unmap:
>> +    if (adsp->adsp_sandbox_needed) {
>> +        iommu_unmap(adsp->iommu_dom, adsp->mem_phys, adsp->mem_size);
>> +        adsp_unmap_smmu(rproc);
>> +        iommu_domain_free(adsp->iommu_dom);
>> +    }
>>   disable_irqs:
>>       qcom_q6v5_unprepare(&adsp->q6v5);
>>   @@ -429,6 +594,9 @@ static int adsp_stop(struct rproc *rproc)
>>       if (ret)
>>           dev_err(adsp->dev, "failed to shutdown: %d\n", ret);
>>   +    if (adsp->adsp_sandbox_needed)
>> +        adsp_unmap_smmu(rproc);
>
> No need to call iommu_unmap() and iommu_domain_free() here?
> (this is the same comment as the one in adsp_rproc_unmap_smmu(). This 
> is just a blind guess based on symmetry of the code.)
Okay.
>
>> +
>>       handover = qcom_q6v5_unprepare(&adsp->q6v5);
>>       if (handover)
>>           qcom_adsp_pil_handover(&adsp->q6v5);
>

  reply	other threads:[~2022-08-16 10:48 UTC|newest]

Thread overview: 13+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2022-08-12 12:47 [PATCH v4 0/7] Update ADSP pil loader for SC7280 platform Srinivasa Rao Mandadapu
2022-08-12 12:47 ` [PATCH v4 1/7] dt-bindings: remoteproc: qcom: Add SC7280 ADSP support Srinivasa Rao Mandadapu
2022-08-14 20:35   ` Rob Herring
2022-08-16  9:50     ` Srinivasa Rao Mandadapu
2022-08-12 12:47 ` [PATCH v4 2/7] remoteproc: qcom: Add flag in adsp private data structure Srinivasa Rao Mandadapu
2022-08-12 12:47 ` [PATCH v4 3/7] remoteproc: qcom: Add compatible name for SC7280 ADSP Srinivasa Rao Mandadapu
2022-08-12 12:47 ` [PATCH v4 4/7] remoteproc: qcom: Replace hard coded values with macros Srinivasa Rao Mandadapu
2022-08-12 12:47 ` [PATCH v4 5/7] remoteproc: qcom: Add efuse evb selection control Srinivasa Rao Mandadapu
2022-08-12 12:47 ` [PATCH v4 6/7] remoteproc: qcom: Add support for memory sandbox Srinivasa Rao Mandadapu
2022-08-13 10:03   ` kernel test robot
2022-08-15  6:37   ` Christophe JAILLET
2022-08-16 10:00     ` Srinivasa Rao Mandadapu [this message]
2022-08-12 12:47 ` [PATCH v4 7/7] remoteproc: qcom: Update QDSP6 out-of-reset timeout value Srinivasa Rao Mandadapu

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=8c9d82d3-eb5d-8e0c-283a-2bb5e7dc8838@quicinc.com \
    --to=quic_srivasam@quicinc.com \
    --cc=agross@kernel.org \
    --cc=bgoswami@quicinc.com \
    --cc=bjorn.andersson@linaro.org \
    --cc=broonie@kernel.org \
    --cc=christophe.jaillet@wanadoo.fr \
    --cc=devicetree@vger.kernel.org \
    --cc=judyhsiao@chromium.org \
    --cc=lgirdwood@gmail.com \
    --cc=linux-arm-msm@vger.kernel.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-remoteproc@vger.kernel.org \
    --cc=perex@perex.cz \
    --cc=quic_plai@quicinc.com \
    --cc=quic_rohkumar@quicinc.com \
    --cc=robh+dt@kernel.org \
    --cc=srinivas.kandagatla@linaro.org \
    --cc=swboyd@chromium.org \
    --cc=tiwai@suse.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox

all inboxes | Powered by JetHome®