From: Jonathan Cameron <jic23@kernel.org>
To: Alison Schofield <amsfield22@gmail.com>
Cc: knaack.h@gmx.de, lars@metafoo.de, pmeerw@pmeerw.net,
linux-iio@vger.kernel.org, linux-kernel@vger.kernel.org,
Michael.Hennerich@analog.com, gregkh@linuxfoundation.org,
devel@driverdev.osuosl.org
Subject: Re: [PATCH v2] iio: trigger: free trigger resource correctly
Date: Sun, 22 Jan 2017 14:25:09 +0000 [thread overview]
Message-ID: <8cf25699-4e6b-21cc-af4d-01212279ecd4@kernel.org> (raw)
In-Reply-To: <20170120034730.GA8864@d830.WORKGROUP>
On 20/01/17 03:47, Alison Schofield wrote:
> These stand-alone trigger drivers were using iio_trigger_put()
> where they should have been using iio_trigger_free(). The
> iio_trigger_put() adds a module_put which is bad since they
> never did a module_get.
>
> In the sysfs driver, module_get/put's are used as triggers are
> added & removed. This extra module_put() occurs on an error path
> in the probe routine (probably rare).
>
> In the bfin-timer & interrupt trigger drivers, the module resources
> are not explicitly managed, so it's doing a put on something that
> was never get'd. It occurs on the probe error path and on the
> remove path (not so rare).
>
> Tested with the sysfs trigger driver.
> The bfin & interrupt drivers were build tested & inspected only.
>
> Signed-off-by: Alison Schofield <amsfield22@gmail.com>
This is certainly more consistent.
Lars, could you sanity check as well given the bfin timer is
in here.
Thanks,
Jonathan
> ---
> Changes in v2:
> Renamed probe jump label to say free instead of put.
> Added further explanation to commit log.
>
> Note from v1:
> Patches to use devm_* funcs are ready to follow this for
> the interrupt & bfin-timer triggers.
>
>
> drivers/iio/trigger/iio-trig-interrupt.c | 8 ++++----
> drivers/iio/trigger/iio-trig-sysfs.c | 2 +-
> drivers/staging/iio/trigger/iio-trig-bfin-timer.c | 4 ++--
> 3 files changed, 7 insertions(+), 7 deletions(-)
>
> diff --git a/drivers/iio/trigger/iio-trig-interrupt.c b/drivers/iio/trigger/iio-trig-interrupt.c
> index 572bc6f..e18f12b 100644
> --- a/drivers/iio/trigger/iio-trig-interrupt.c
> +++ b/drivers/iio/trigger/iio-trig-interrupt.c
> @@ -58,7 +58,7 @@ static int iio_interrupt_trigger_probe(struct platform_device *pdev)
> trig_info = kzalloc(sizeof(*trig_info), GFP_KERNEL);
> if (!trig_info) {
> ret = -ENOMEM;
> - goto error_put_trigger;
> + goto error_free_trigger;
> }
> iio_trigger_set_drvdata(trig, trig_info);
> trig_info->irq = irq;
> @@ -83,8 +83,8 @@ static int iio_interrupt_trigger_probe(struct platform_device *pdev)
> free_irq(irq, trig);
> error_free_trig_info:
> kfree(trig_info);
> -error_put_trigger:
> - iio_trigger_put(trig);
> +error_free_trigger:
> + iio_trigger_free(trig);
> error_ret:
> return ret;
> }
> @@ -99,7 +99,7 @@ static int iio_interrupt_trigger_remove(struct platform_device *pdev)
> iio_trigger_unregister(trig);
> free_irq(trig_info->irq, trig);
> kfree(trig_info);
> - iio_trigger_put(trig);
> + iio_trigger_free(trig);
>
> return 0;
> }
> diff --git a/drivers/iio/trigger/iio-trig-sysfs.c b/drivers/iio/trigger/iio-trig-sysfs.c
> index 3dfab2b..202e8b8 100644
> --- a/drivers/iio/trigger/iio-trig-sysfs.c
> +++ b/drivers/iio/trigger/iio-trig-sysfs.c
> @@ -174,7 +174,7 @@ static int iio_sysfs_trigger_probe(int id)
> return 0;
>
> out2:
> - iio_trigger_put(t->trig);
> + iio_trigger_free(t->trig);
> free_t:
> kfree(t);
> out1:
> diff --git a/drivers/staging/iio/trigger/iio-trig-bfin-timer.c b/drivers/staging/iio/trigger/iio-trig-bfin-timer.c
> index 9658f20..4e0b4ee 100644
> --- a/drivers/staging/iio/trigger/iio-trig-bfin-timer.c
> +++ b/drivers/staging/iio/trigger/iio-trig-bfin-timer.c
> @@ -260,7 +260,7 @@ static int iio_bfin_tmr_trigger_probe(struct platform_device *pdev)
> out1:
> iio_trigger_unregister(st->trig);
> out:
> - iio_trigger_put(st->trig);
> + iio_trigger_free(st->trig);
> return ret;
> }
>
> @@ -273,7 +273,7 @@ static int iio_bfin_tmr_trigger_remove(struct platform_device *pdev)
> peripheral_free(st->t->pin);
> free_irq(st->irq, st);
> iio_trigger_unregister(st->trig);
> - iio_trigger_put(st->trig);
> + iio_trigger_free(st->trig);
>
> return 0;
> }
>
next prev parent reply other threads:[~2017-01-22 14:25 UTC|newest]
Thread overview: 4+ messages / expand[flat|nested] mbox.gz Atom feed top
2017-01-20 3:47 Alison Schofield
2017-01-22 14:25 ` Jonathan Cameron [this message]
2017-01-22 15:56 ` Lars-Peter Clausen
2017-01-22 16:15 ` Jonathan Cameron
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=8cf25699-4e6b-21cc-af4d-01212279ecd4@kernel.org \
--to=jic23@kernel.org \
--cc=Michael.Hennerich@analog.com \
--cc=amsfield22@gmail.com \
--cc=devel@driverdev.osuosl.org \
--cc=gregkh@linuxfoundation.org \
--cc=knaack.h@gmx.de \
--cc=lars@metafoo.de \
--cc=linux-iio@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=pmeerw@pmeerw.net \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox
Powered by JetHome