Re: [PATCH v2] ASoC: cros_ec_codec: Log results when EC commands fail

[Enric Balletbo i Serra <enric.balletbo@collabora.com>]

Hi Yu-Hsuan,

Thank you for your patch

On 3/7/20 9:19, Yu-Hsuan Hsu wrote:
> Log results of failed EC commands to identify a problem more easily.
> 
> Replace cros_ec_cmd_xfer_status with cros_ec_cmd_xfer because the result
> has already been checked in this function. The wrapper is not needed.
> 

Nack, we did an effort to remove all public users of cros_ec_cmd_xfer() in
favour of cros_ec_cmd_xfer_status() and you are reintroducing again. You can do
the same but using cros_ec_cmd_xfer_status(). In fact, your patch will not build
on top of the upcoming changes.

> Signed-off-by: Yu-Hsuan Hsu <yuhsuan@chromium.org>
> ---
>  sound/soc/codecs/cros_ec_codec.c | 9 ++++++++-
>  1 file changed, 8 insertions(+), 1 deletion(-)
> 
> diff --git a/sound/soc/codecs/cros_ec_codec.c b/sound/soc/codecs/cros_ec_codec.c
> index 8d45c628e988e..a4ab62f59efa6 100644
> --- a/sound/soc/codecs/cros_ec_codec.c
> +++ b/sound/soc/codecs/cros_ec_codec.c
> @@ -90,10 +90,17 @@ static int send_ec_host_command(struct cros_ec_device *ec_dev, uint32_t cmd,
>  	if (outsize)
>  		memcpy(msg->data, out, outsize);
>  
> -	ret = cros_ec_cmd_xfer_status(ec_dev, msg);
> +	ret = cros_ec_cmd_xfer(ec_dev, msg);
>  	if (ret < 0)
>  		goto error;
>  
> +	if (msg->result != EC_RES_SUCCESS) {
> +		dev_err(ec_dev->dev, "Command %d failed: %d\n", cmd,
> +			msg->result);
> +		ret = -EPROTO;
> +		goto error;
> +	}
> +
>  	if (insize)
>  		memcpy(in, msg->data, insize);
>  
>