mirror of https://lore.kernel.org/lkml/
 help / color / mirror / Atom feed
From: Alexandre Torgue <alexandre.torgue@st.com>
To: Fabien Dessenne <fabien.dessenne@st.com>,
	Linus Walleij <linus.walleij@linaro.org>,
	Maxime Coquelin <mcoquelin.stm32@gmail.com>,
	Benjamin Gaignard <benjamin.gaignard@linaro.org>,
	<linux-gpio@vger.kernel.org>,
	<linux-stm32@st-md-mailman.stormreply.com>,
	<linux-arm-kernel@lists.infradead.org>,
	<linux-kernel@vger.kernel.org>
Subject: Re: [PATCH] pinctrl: stm32: check irq controller availability at probe
Date: Wed, 24 Apr 2019 11:29:48 +0200	[thread overview]
Message-ID: <8d65f99f-0874-8012-5e44-3e579cb1f878@st.com> (raw)
In-Reply-To: <1556093324-1008-1-git-send-email-fabien.dessenne@st.com>



On 4/24/19 10:08 AM, Fabien Dessenne wrote:
> It is not guaranteed that the IRQ controller driver is probed before
> the pin controller driver gets probed.
> Considering this, check for the irq domain availability during probe
> and return EPROBE_DEFER if needed.
> 
> Signed-off-by: Fabien Dessenne <fabien.dessenne@st.com>
> ---


Acked-by: Alexandre TORGUE <alexandre.torgue@st.com>

>   drivers/pinctrl/stm32/pinctrl-stm32.c | 37 +++++++++++++++++++++++++----------
>   1 file changed, 27 insertions(+), 10 deletions(-)
> 
> diff --git a/drivers/pinctrl/stm32/pinctrl-stm32.c b/drivers/pinctrl/stm32/pinctrl-stm32.c
> index 0aebc31..2317ccf 100644
> --- a/drivers/pinctrl/stm32/pinctrl-stm32.c
> +++ b/drivers/pinctrl/stm32/pinctrl-stm32.c
> @@ -1122,23 +1122,35 @@ static int stm32_gpiolib_register_bank(struct stm32_pinctrl *pctl,
>   	return 0;
>   }
>   
> +static struct irq_domain *stm32_pctrl_get_irq_domain(struct device_node *np)
> +{
> +	struct device_node *parent;
> +	struct irq_domain *domain;
> +
> +	if (!of_find_property(np, "interrupt-parent", NULL))
> +		return NULL;
> +
> +	parent = of_irq_find_parent(np);
> +	if (!parent)
> +		return ERR_PTR(-ENXIO);
> +
> +	domain = irq_find_host(parent);
> +	if (!domain)
> +		/* domain not registered yet */
> +		return ERR_PTR(-EPROBE_DEFER);
> +
> +	return domain;
> +}
> +
>   static int stm32_pctrl_dt_setup_irq(struct platform_device *pdev,
>   			   struct stm32_pinctrl *pctl)
>   {
> -	struct device_node *np = pdev->dev.of_node, *parent;
> +	struct device_node *np = pdev->dev.of_node;
>   	struct device *dev = &pdev->dev;
>   	struct regmap *rm;
>   	int offset, ret, i;
>   	int mask, mask_width;
>   
> -	parent = of_irq_find_parent(np);
> -	if (!parent)
> -		return -ENXIO;
> -
> -	pctl->domain = irq_find_host(parent);
> -	if (!pctl->domain)
> -		return -ENXIO;
> -
>   	pctl->regmap = syscon_regmap_lookup_by_phandle(np, "st,syscfg");
>   	if (IS_ERR(pctl->regmap))
>   		return PTR_ERR(pctl->regmap);
> @@ -1264,6 +1276,11 @@ int stm32_pctl_probe(struct platform_device *pdev)
>   
>   	platform_set_drvdata(pdev, pctl);
>   
> +	/* check for IRQ controller (may require deferred probe) */
> +	pctl->domain = stm32_pctrl_get_irq_domain(np);
> +	if (IS_ERR(pctl->domain))
> +		return PTR_ERR(pctl->domain);
> +
>   	/* hwspinlock is optional */
>   	hwlock_id = of_hwspin_lock_get_id(pdev->dev.of_node, 0);
>   	if (hwlock_id < 0) {
> @@ -1294,7 +1311,7 @@ int stm32_pctl_probe(struct platform_device *pdev)
>   		return -EINVAL;
>   	}
>   
> -	if (of_find_property(np, "interrupt-parent", NULL)) {
> +	if (pctl->domain) {
>   		ret = stm32_pctrl_dt_setup_irq(pdev, pctl);
>   		if (ret)
>   			return ret;
> 

  reply	other threads:[~2019-04-24  9:30 UTC|newest]

Thread overview: 3+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2019-04-24  8:08 Fabien Dessenne
2019-04-24  9:29 ` Alexandre Torgue [this message]
2019-04-24 10:48 ` Linus Walleij

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=8d65f99f-0874-8012-5e44-3e579cb1f878@st.com \
    --to=alexandre.torgue@st.com \
    --cc=benjamin.gaignard@linaro.org \
    --cc=fabien.dessenne@st.com \
    --cc=linus.walleij@linaro.org \
    --cc=linux-arm-kernel@lists.infradead.org \
    --cc=linux-gpio@vger.kernel.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-stm32@st-md-mailman.stormreply.com \
    --cc=mcoquelin.stm32@gmail.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox

all inboxes | Powered by JetHome®