From: Adrian Hunter <adrian.hunter@intel.com>
To: Ulf Hansson <ulf.hansson@linaro.org>, linux-mmc@vger.kernel.org
Cc: Wenchao Chen <wenchao.chen666@gmail.com>,
Avri Altman <avri.altman@wdc.com>,
Christian Lohle <cloehle@hyperstone.com>,
linux-block@vger.kernel.org, linux-kernel@vger.kernel.org,
Bean Huo <beanhuo@micron.com>
Subject: Re: [PATCH] mmc: core: Allow to avoid REQ_FUA if the eMMC supports an internal cache
Date: Tue, 21 Mar 2023 12:36:41 +0200 [thread overview]
Message-ID: <8d6d12b5-39d4-ac07-f725-18ae9df9765b@intel.com> (raw)
In-Reply-To: <20230316164514.1615169-1-ulf.hansson@linaro.org>
On 16/03/23 18:45, Ulf Hansson wrote:
> REQ_FUA translates into so called "reliable writes" (atomic writes) for
> eMMC cards, which is generally supported as it was introduced as a
> mandatory feature already in the v4.3 (2007) of the eMMC spec. To fully
> support the reliable writes (thus REQ_FUA), the mmc host driver needs to
> support the CMD23 (MMC_CAP_CMD23) too, which is rather common nowadays.
>
> File systems typically uses REQ_FUA for writing their meta-data and other
> important information. Ideally it should provide an increased protection
> against data-corruption, during sudden power-failures. This said, file
> systems have other ways to handle sudden power-failures too, like using
> checksums to detect partly-written data, for example.
>
> It has been reported that the reliable writes are costly for some eMMCs,
> leading to performance degradations. Exactly why, is in the implementation
> details of the internals of the eMMC.
>
> Moreover, in the v4.5 (2011) of the eMMC spec, the cache-control was
> introduced as an optional feature. It allows the host to trigger a flush of
> the eMMC's internal write-cache. In the past, before the cache-control
> feature was added, the reliable write acted as trigger for the eMMC, to
> also flush its internal write-cache, even if that too remains as an
> implementation detail of the eMMC.
>
> In a way to try to improve the situation with costly reliable writes and
> REQ_FUA, let's add a new card quirk MMC_QUIRK_AVOID_REL_WRITE, which may be
> set to avoid announcing the support for it. However, as mentioned above,
> due to the specific relationship with the cache-control feature, we must
> keep REQ_FUA unless that is supported too.
>
> Reported-by: Wenchao Chen <wenchao.chen666@gmail.com>
> Acked-by: Bean Huo <beanhuo@micron.com>
> Acked-by: Avri Altman <avri.altman@wdc.com>
> Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
Minor cosmetic suggestion below, but nevertheless:
Acked-by: Adrian Hunter <adrian.hunter@intel.com>
> ---
>
> Updated since the RFC:
> Added a card quirk to maintain the current behaviour. The quirk isn't
> set for any cards yet, which is needed (a patch on top) to move forward
> with this.
>
> ---
> drivers/mmc/core/block.c | 16 ++++++++++++----
> drivers/mmc/core/card.h | 5 +++++
> include/linux/mmc/card.h | 1 +
> 3 files changed, 18 insertions(+), 4 deletions(-)
>
> diff --git a/drivers/mmc/core/block.c b/drivers/mmc/core/block.c
> index 672ab90c4b2d..35292e36a1fb 100644
> --- a/drivers/mmc/core/block.c
> +++ b/drivers/mmc/core/block.c
> @@ -2409,8 +2409,7 @@ static struct mmc_blk_data *mmc_blk_alloc_req(struct mmc_card *card,
> struct mmc_blk_data *md;
> int devidx, ret;
> char cap_str[10];
> - bool cache_enabled = false;
> - bool fua_enabled = false;
> + bool cache_enabled, avoid_fua, fua_enabled = false;
>
> devidx = ida_simple_get(&mmc_blk_ida, 0, max_devices, GFP_KERNEL);
> if (devidx < 0) {
> @@ -2494,11 +2493,20 @@ static struct mmc_blk_data *mmc_blk_alloc_req(struct mmc_card *card,
> ((card->ext_csd.rel_param & EXT_CSD_WR_REL_PARAM_EN) ||
> card->ext_csd.rel_sectors)) {
> md->flags |= MMC_BLK_REL_WR;
> + }
> +
> + /*
> + * REQ_FUA is supported through eMMC reliable writes, which has been
> + * reported to be a bit costly for some eMMCs. In these cases, let's
> + * rely on the flush requests (REQ_OP_FLUSH) instead, if we can use the
> + * cache-control feature too.
> + */
> + cache_enabled = mmc_cache_enabled(card->host);
> + avoid_fua = cache_enabled && mmc_card_avoid_rel_write(card);
> + if (md->flags & MMC_BLK_REL_WR && !avoid_fua) {
> fua_enabled = true;
> cache_enabled = true;
> }
looks like this could be just:
fua_enabled = (md->flags & MMC_BLK_REL_WR) && !avoid_fua;
with fua_enabled no longer needing initialization
> - if (mmc_cache_enabled(card->host))
> - cache_enabled = true;
>
> blk_queue_write_cache(md->queue.queue, cache_enabled, fua_enabled);
>
> diff --git a/drivers/mmc/core/card.h b/drivers/mmc/core/card.h
> index cfdd1ff40b86..2ab448fa2841 100644
> --- a/drivers/mmc/core/card.h
> +++ b/drivers/mmc/core/card.h
> @@ -229,6 +229,11 @@ static inline int mmc_blksz_for_byte_mode(const struct mmc_card *c)
> return c->quirks & MMC_QUIRK_BLKSZ_FOR_BYTE_MODE;
> }
>
> +static inline int mmc_card_avoid_rel_write(const struct mmc_card *c)
> +{
> + return c->quirks & MMC_QUIRK_AVOID_REL_WRITE;
> +}
> +
> static inline int mmc_card_disable_cd(const struct mmc_card *c)
> {
> return c->quirks & MMC_QUIRK_DISABLE_CD;
> diff --git a/include/linux/mmc/card.h b/include/linux/mmc/card.h
> index c726ea781255..4d297d565c83 100644
> --- a/include/linux/mmc/card.h
> +++ b/include/linux/mmc/card.h
> @@ -282,6 +282,7 @@ struct mmc_card {
> /* for byte mode */
> #define MMC_QUIRK_NONSTD_SDIO (1<<2) /* non-standard SDIO card attached */
> /* (missing CIA registers) */
> +#define MMC_QUIRK_AVOID_REL_WRITE (1<<3) /* Avoid rel-write (REQ_FUA) */
> #define MMC_QUIRK_NONSTD_FUNC_IF (1<<4) /* SDIO card has nonstd function interfaces */
> #define MMC_QUIRK_DISABLE_CD (1<<5) /* disconnect CD/DAT[3] resistor */
> #define MMC_QUIRK_INAND_CMD38 (1<<6) /* iNAND devices have broken CMD38 */
next prev parent reply other threads:[~2023-03-21 10:37 UTC|newest]
Thread overview: 10+ messages / expand[flat|nested] mbox.gz Atom feed top
2023-03-16 16:45 Ulf Hansson
2023-03-16 16:49 ` Christoph Hellwig
2023-03-16 19:12 ` Adrian Hunter
2023-03-20 6:25 ` Christoph Hellwig
2023-03-20 15:24 ` Ulf Hansson
2023-03-21 12:37 ` Christoph Hellwig
2023-03-21 13:28 ` Ulf Hansson
2023-03-21 10:36 ` Adrian Hunter [this message]
2023-03-21 11:03 ` Ulf Hansson
2023-03-21 11:12 ` Adrian Hunter
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=8d6d12b5-39d4-ac07-f725-18ae9df9765b@intel.com \
--to=adrian.hunter@intel.com \
--cc=avri.altman@wdc.com \
--cc=beanhuo@micron.com \
--cc=cloehle@hyperstone.com \
--cc=linux-block@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-mmc@vger.kernel.org \
--cc=ulf.hansson@linaro.org \
--cc=wenchao.chen666@gmail.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox
all inboxes | Powered by JetHome®