From: Dennis Wassenberg <dennis.wassenberg@secunet.com>
To: Kernel development list <linux-kernel@vger.kernel.org>,
<linux-pm@vger.kernel.org>
Subject: Question regarding intel_pstate in case of disabled smt
Date: Fri, 17 May 2019 12:24:11 +0200 [thread overview]
Message-ID: <8d859cb0-0646-4f52-b060-3816d689aade@secunet.com> (raw)
Hi all,
I would like to ask a question regarding cpu frequency scaling / cpu performance using intel_pstate with activated HWP.
I think the special CPU doesn't matter. I checked it with i7-8550U and i7-8565U. Currently I am not sure if this is a
bug. Thats why I am asking...
Using intel_pstate default settings (min_perf_pct=10, max_perf_pct=100, no_turbo=0) everything behaves as expected. If I
change max_perf_pct and/or no_turbo i can observe that the cpu frequency doesn't increase that much compared to the
default settings under load.
But if I disable smt, the settings of the pstate driver does not seem to change anything. If I set no_turbo and/or
max_perf_pct to a lower value than 100 I can not notice that there is a change at the cpu frequency scaling. For
example: If I set min_perf_pct=max_perf_pct=5 the cpu frequency of the 4 online cpus will be above 4 GHz in case of smt
is disabled. If smt is enabled the cpu frequency of the 8 cpus is 400 MHz. The same occurred if I disable turbo by
setting no_turbo to 1. If smt is disbaled the frequency will be above 4 GHz in load situations. If smt is enabled the
cpu frequency is 1,80 GHz.
If I use intel_pstate with disabled HWP it behaves the same if smt is enabled or disabled. So, it makes no difference if
smt is enabled or disabled . The cpu frequency will adapt exactly to the configured settings.
So, is this intended that HWP does not consider the pstate settings if smt is disabled?
Thank you & best regards,
Dennis
reply other threads:[~2019-05-17 10:37 UTC|newest]
Thread overview: [no followups] expand[flat|nested] mbox.gz Atom feed
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=8d859cb0-0646-4f52-b060-3816d689aade@secunet.com \
--to=dennis.wassenberg@secunet.com \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-pm@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox
all inboxes | Powered by JetHome®