From: Mario Limonciello <superm1@kernel.org>
To: Kim Phillips <kim.phillips@amd.com>,
Tom Lendacky <thomas.lendacky@amd.com>,
Herbert Xu <herbert@gondor.apana.org.au>,
"David S . Miller" <davem@davemloft.net>
Cc: Ashish Kalra <ashish.kalra@amd.com>,
Rijo Thomas <Rijo-john.Thomas@amd.com>,
linux-crypto@vger.kernel.org, linux-kernel@vger.kernel.org,
stable@vger.kernel.org
Subject: Re: [PATCH 0/2] crypto: ccp - fix misc_register() failure paths in SEV and SFS
Date: Wed, 18 Nov 2026 10:05:28 -0600 [thread overview]
Message-ID: <8dc563e1-b5f4-49d3-80bc-5bd54e58392b@kernel.org> (raw)
In-Reply-To: <20261117221901.746427-1-kim.phillips@amd.com>
On 11/17/26 16:18, Kim Phillips wrote:
> sev_misc_init() and sfs_misc_init() both publish their newly allocated
> sev_misc_dev/sfs_misc_dev to a file-global pointer before registering
> the misc device, then return early if misc_register() fails. Neither
> frees the allocation nor clears the global, and the early return is
> ahead of the kref_init(), so the embedded refcount is left at the zero
> from kzalloc_obj().
>
> Both features can be detected on more than one device, and a failure
> here only aborts the probe of the device that hit it. The next device
> to probe therefore sees a stale non-NULL global, takes the else branch,
> and calls kref_get() on a zeroed refcount:
>
> refcount_t: addition on 0; use-after-free.
>
> The count stays at zero, so the matching kref_put() on teardown warns in
> the same way and never reaches sev_exit()/sfs_exit(). What is left is a
> leaked allocation plus a device whose ->misc points at a miscdevice that
> was never registered, while the driver still reports the feature as
> available and no /dev/sev or /dev/sfs node exists.
>
> Both patches free the allocation and reset the global on the
> misc_register() error path.
>
> Note the differing Fixes: tags. The SEV stale-pointer half goes back to
> the original SEV support commit, but the allocation was devm_kzalloc()
> then, so backporting the kfree() that far would turn the leak into a
> double free; the tag points at the commit from which the fix is safe.
>
> Found by review of the equivalent bug reports; no hardware failure was
> observed, as misc_register() only fails here on minor exhaustion or an
> OOM. Compile-tested on x86_64 with CONFIG_CRYPTO_DEV_SP_PSP=y.
>
> The two patches are independent of each other, and of the pending
>
> https://lore.kernel.org/linux-crypto/20261116203622.615371-1-kim.phillips@amd.com/
>
> which touches psp-dev.c only. This series applies on top of it, but
> also applies cleanly to cryptodev master without it.
>
> Kim Phillips (2):
> crypto: ccp - fix leak and stale misc_dev on SFS misc_register()
> failure
> crypto: ccp - fix leak and stale misc_dev on SEV misc_register()
> failure
>
> drivers/crypto/ccp/sev-dev.c | 5 ++++-
> drivers/crypto/ccp/sfs.c | 5 ++++-
> 2 files changed, 8 insertions(+), 2 deletions(-)
>
>
> base-commit: 26ca5f34841f0a86d0883664a1c13be89a01d351
Reviewed-by: Mario Limonciello (AMD) <superm1@kernel.org>
prev parent reply other threads:[~2026-11-18 16:05 UTC|newest]
Thread overview: 4+ messages / expand[flat|nested] mbox.gz Atom feed top
2026-11-17 22:18 Kim Phillips
2026-11-17 22:19 ` [PATCH 1/2] crypto: ccp - fix leak and stale misc_dev on SFS misc_register() failure Kim Phillips
2026-11-17 22:19 ` [PATCH 2/2] crypto: ccp - fix leak and stale misc_dev on SEV " Kim Phillips
2026-11-18 16:05 ` Mario Limonciello [this message]
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=8dc563e1-b5f4-49d3-80bc-5bd54e58392b@kernel.org \
--to=superm1@kernel.org \
--cc=Rijo-john.Thomas@amd.com \
--cc=ashish.kalra@amd.com \
--cc=davem@davemloft.net \
--cc=herbert@gondor.apana.org.au \
--cc=kim.phillips@amd.com \
--cc=linux-crypto@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=stable@vger.kernel.org \
--cc=thomas.lendacky@amd.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox
all inboxes | Powered by JetHome®