From: Dmitry Vyukov <dvyukov@google.com>
To: krisman@collabora.com, tglx@linutronix.de, luto@kernel.org,
peterz@infradead.org, keescook@chromium.org,
gregory.price@memverge.com
Cc: Dmitry Vyukov <dvyukov@google.com>,
Marco Elver <elver@google.com>,
linux-kernel@vger.kernel.org
Subject: [PATCH v3 3/3] selftests: Add tests for PR_SYS_DISPATCH_INCLUSIVE_ON
Date: Wed, 21 May 2025 17:04:30 +0200 [thread overview]
Message-ID: <8df4b50b176b073550bab5b3f3faff752c5f8e17.1747839857.git.dvyukov@google.com> (raw)
In-Reply-To: <cover.1747839857.git.dvyukov@google.com>
Add tests for PR_SYS_DISPATCH_INCLUSIVE_ON correct/incorrect args,
and a test that ensures that the specified range is respected
by both PR_SYS_DISPATCH_EXCLUSIVE_ON and PR_SYS_DISPATCH_INCLUSIVE_ON.
Signed-off-by: Dmitry Vyukov <dvyukov@google.com>
Cc: Gabriel Krisman Bertazi <krisman@collabora.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Andy Lutomirski <luto@kernel.org>
Cc: Peter Zijlstra (Intel) <peterz@infradead.org>
Cc: Kees Cook <keescook@chromium.org>
Cc: Gregory Price <gregory.price@memverge.com>
Cc: Marco Elver <elver@google.com>
Cc: linux-kernel@vger.kernel.org
---
Changes in v3:
- rework tests for the new PR_SYS_DISPATCH_INCLUSIVE_ON
Changes in v2:
- add tests for 0-sized range
- change range setup in the test to be fatal
---
.../syscall_user_dispatch/sud_test.c | 94 +++++++++++++++----
1 file changed, 74 insertions(+), 20 deletions(-)
diff --git a/tools/testing/selftests/syscall_user_dispatch/sud_test.c b/tools/testing/selftests/syscall_user_dispatch/sud_test.c
index 48cf01aeec3e7..2eb2c06303f2a 100644
--- a/tools/testing/selftests/syscall_user_dispatch/sud_test.c
+++ b/tools/testing/selftests/syscall_user_dispatch/sud_test.c
@@ -10,6 +10,8 @@
#include <sys/sysinfo.h>
#include <sys/syscall.h>
#include <signal.h>
+#include <stdbool.h>
+#include <stdlib.h>
#include <asm/unistd.h>
#include "../kselftest_harness.h"
@@ -17,11 +19,15 @@
#ifndef PR_SET_SYSCALL_USER_DISPATCH
# define PR_SET_SYSCALL_USER_DISPATCH 59
# define PR_SYS_DISPATCH_OFF 0
-# define PR_SYS_DISPATCH_ON 1
# define SYSCALL_DISPATCH_FILTER_ALLOW 0
# define SYSCALL_DISPATCH_FILTER_BLOCK 1
#endif
+#ifndef PR_SYS_DISPATCH_EXCLUSIVE_ON
+# define PR_SYS_DISPATCH_EXCLUSIVE_ON 1
+# define PR_SYS_DISPATCH_INCLUSIVE_ON 2
+#endif
+
#ifndef SYS_USER_DISPATCH
# define SYS_USER_DISPATCH 2
#endif
@@ -65,7 +71,7 @@ TEST_SIGNAL(dispatch_trigger_sigsys, SIGSYS)
ret = sysinfo(&info);
ASSERT_EQ(0, ret);
- ret = prctl(PR_SET_SYSCALL_USER_DISPATCH, PR_SYS_DISPATCH_ON, 0, 0, &sel);
+ ret = prctl(PR_SET_SYSCALL_USER_DISPATCH, PR_SYS_DISPATCH_EXCLUSIVE_ON, 0, 0, &sel);
ASSERT_EQ(0, ret) {
TH_LOG("Kernel does not support CONFIG_SYSCALL_USER_DISPATCH");
}
@@ -118,8 +124,8 @@ TEST(bad_prctl_param)
/* Valid parameter */
prctl_valid(_metadata, op, 0x0, 0x0, 0x0);
- /* PR_SYS_DISPATCH_ON */
- op = PR_SYS_DISPATCH_ON;
+ /* PR_SYS_DISPATCH_EXCLUSIVE_ON */
+ op = PR_SYS_DISPATCH_EXCLUSIVE_ON;
/* Dispatcher region is bad (offset > 0 && len == 0) */
prctl_invalid(_metadata, op, 0x1, 0x0, &sel, EINVAL);
@@ -131,12 +137,24 @@ TEST(bad_prctl_param)
/*
* Dispatcher range overflows unsigned long
*/
- prctl_invalid(_metadata, PR_SYS_DISPATCH_ON, 1, -1L, &sel, EINVAL);
+ prctl_invalid(_metadata, PR_SYS_DISPATCH_EXCLUSIVE_ON, 1, -1L, &sel, EINVAL);
/*
* Allowed range overflows usigned long
*/
- prctl_invalid(_metadata, PR_SYS_DISPATCH_ON, -1L, 0x1, &sel, EINVAL);
+ prctl_invalid(_metadata, PR_SYS_DISPATCH_EXCLUSIVE_ON, -1L, 0x1, &sel, EINVAL);
+
+ /* 0 len should fail for PR_SYS_DISPATCH_INCLUSIVE_ON */
+ prctl_invalid(_metadata, PR_SYS_DISPATCH_INCLUSIVE_ON, 1, 0, 0, EINVAL);
+
+ /* Range wrap-around should fail */
+ prctl_invalid(_metadata, PR_SYS_DISPATCH_INCLUSIVE_ON, -1L, 2, 0, EINVAL);
+
+ /* Normal range shouldn't fail */
+ prctl_valid(_metadata, PR_SYS_DISPATCH_INCLUSIVE_ON, 2, 3, 0);
+
+ /* Invalid selector */
+ prctl_invalid(_metadata, PR_SYS_DISPATCH_INCLUSIVE_ON, 2, 3, (void *) -1, EFAULT);
}
/*
@@ -147,11 +165,13 @@ char glob_sel;
int nr_syscalls_emulated;
int si_code;
int si_errno;
+unsigned long syscall_addr;
static void handle_sigsys(int sig, siginfo_t *info, void *ucontext)
{
si_code = info->si_code;
si_errno = info->si_errno;
+ syscall_addr = (unsigned long)info->si_call_addr;
if (info->si_syscall == MAGIC_SYSCALL_1)
nr_syscalls_emulated++;
@@ -174,31 +194,34 @@ static void handle_sigsys(int sig, siginfo_t *info, void *ucontext)
#endif
}
-TEST(dispatch_and_return)
+int setup_sigsys_handler(void)
{
- long ret;
struct sigaction act;
sigset_t mask;
- glob_sel = 0;
- nr_syscalls_emulated = 0;
- si_code = 0;
- si_errno = 0;
-
memset(&act, 0, sizeof(act));
sigemptyset(&mask);
-
act.sa_sigaction = handle_sigsys;
act.sa_flags = SA_SIGINFO;
act.sa_mask = mask;
+ return sigaction(SIGSYS, &act, NULL);
+}
- ret = sigaction(SIGSYS, &act, NULL);
- ASSERT_EQ(0, ret);
+TEST(dispatch_and_return)
+{
+ long ret;
+
+ glob_sel = 0;
+ nr_syscalls_emulated = 0;
+ si_code = 0;
+ si_errno = 0;
+
+ ASSERT_EQ(0, setup_sigsys_handler());
/* Make sure selector is good prior to prctl. */
SYSCALL_DISPATCH_OFF(glob_sel);
- ret = prctl(PR_SET_SYSCALL_USER_DISPATCH, PR_SYS_DISPATCH_ON, 0, 0, &glob_sel);
+ ret = prctl(PR_SET_SYSCALL_USER_DISPATCH, PR_SYS_DISPATCH_EXCLUSIVE_ON, 0, 0, &glob_sel);
ASSERT_EQ(0, ret) {
TH_LOG("Kernel does not support CONFIG_SYSCALL_USER_DISPATCH");
}
@@ -254,7 +277,7 @@ TEST_SIGNAL(bad_selector, SIGSYS)
/* Make sure selector is good prior to prctl. */
SYSCALL_DISPATCH_OFF(glob_sel);
- ret = prctl(PR_SET_SYSCALL_USER_DISPATCH, PR_SYS_DISPATCH_ON, 0, 0, &glob_sel);
+ ret = prctl(PR_SET_SYSCALL_USER_DISPATCH, PR_SYS_DISPATCH_EXCLUSIVE_ON, 0, 0, &glob_sel);
ASSERT_EQ(0, ret) {
TH_LOG("Kernel does not support CONFIG_SYSCALL_USER_DISPATCH");
}
@@ -278,7 +301,7 @@ TEST(disable_dispatch)
struct sysinfo info;
char sel = 0;
- ret = prctl(PR_SET_SYSCALL_USER_DISPATCH, PR_SYS_DISPATCH_ON, 0, 0, &sel);
+ ret = prctl(PR_SET_SYSCALL_USER_DISPATCH, PR_SYS_DISPATCH_EXCLUSIVE_ON, 0, 0, &sel);
ASSERT_EQ(0, ret) {
TH_LOG("Kernel does not support CONFIG_SYSCALL_USER_DISPATCH");
}
@@ -310,7 +333,7 @@ TEST(direct_dispatch_range)
* Instead of calculating libc addresses; allow the entire
* memory map and lock the selector.
*/
- ret = prctl(PR_SET_SYSCALL_USER_DISPATCH, PR_SYS_DISPATCH_ON, 0, -1L, &sel);
+ ret = prctl(PR_SET_SYSCALL_USER_DISPATCH, PR_SYS_DISPATCH_EXCLUSIVE_ON, 0, -1L, &sel);
ASSERT_EQ(0, ret) {
TH_LOG("Kernel does not support CONFIG_SYSCALL_USER_DISPATCH");
}
@@ -323,4 +346,35 @@ TEST(direct_dispatch_range)
}
}
+static void test_range(struct __test_metadata *_metadata,
+ unsigned long op, unsigned long off,
+ unsigned long size, bool dispatch)
+{
+ nr_syscalls_emulated = 0;
+ SYSCALL_DISPATCH_OFF(glob_sel);
+ EXPECT_EQ(0, prctl(PR_SET_SYSCALL_USER_DISPATCH, op, off, size, &glob_sel));
+ SYSCALL_DISPATCH_ON(glob_sel);
+ if (dispatch) {
+ EXPECT_EQ(syscall(MAGIC_SYSCALL_1), MAGIC_SYSCALL_1);
+ EXPECT_EQ(nr_syscalls_emulated, 1);
+ } else {
+ EXPECT_EQ(syscall(MAGIC_SYSCALL_1), -1);
+ EXPECT_EQ(nr_syscalls_emulated, 0);
+ }
+}
+
+TEST(dispatch_range)
+{
+ ASSERT_EQ(0, setup_sigsys_handler());
+ test_range(_metadata, PR_SYS_DISPATCH_EXCLUSIVE_ON, 0, 0, true);
+ test_range(_metadata, PR_SYS_DISPATCH_EXCLUSIVE_ON, syscall_addr, 1, false);
+ test_range(_metadata, PR_SYS_DISPATCH_EXCLUSIVE_ON, syscall_addr-100, 200, false);
+ test_range(_metadata, PR_SYS_DISPATCH_EXCLUSIVE_ON, syscall_addr+1, 100, true);
+ test_range(_metadata, PR_SYS_DISPATCH_EXCLUSIVE_ON, syscall_addr-100, 100, true);
+ test_range(_metadata, PR_SYS_DISPATCH_INCLUSIVE_ON, syscall_addr, 1, true);
+ test_range(_metadata, PR_SYS_DISPATCH_INCLUSIVE_ON, syscall_addr-1, 1, false);
+ test_range(_metadata, PR_SYS_DISPATCH_INCLUSIVE_ON, syscall_addr+1, 1, false);
+ SYSCALL_DISPATCH_OFF(glob_sel);
+}
+
TEST_HARNESS_MAIN
--
2.49.0.1143.g0be31eac6b-goog
next prev parent reply other threads:[~2025-05-21 15:05 UTC|newest]
Thread overview: 7+ messages / expand[flat|nested] mbox.gz Atom feed top
[not found] <cover.1747839857.git.dvyukov@google.com>
2025-05-21 15:04 ` [PATCH v3 1/3] selftests: Fix errno checking in syscall_user_dispatch test Dmitry Vyukov
2025-06-13 16:44 ` [tip: core/entry] " tip-bot2 for Dmitry Vyukov
2025-05-21 15:04 ` [PATCH v3 2/3] syscall_user_dispatch: Add PR_SYS_DISPATCH_INCLUSIVE_ON Dmitry Vyukov
2025-06-13 16:44 ` [tip: core/entry] " tip-bot2 for Dmitry Vyukov
2025-06-14 6:59 ` [PATCH] syscall_user_dispatch: Fix grammar in task_set_syscall_user_dispatch() Ingo Molnar
2025-05-21 15:04 ` Dmitry Vyukov [this message]
2025-06-13 16:44 ` [tip: core/entry] selftests: Add tests for PR_SYS_DISPATCH_INCLUSIVE_ON tip-bot2 for Dmitry Vyukov
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=8df4b50b176b073550bab5b3f3faff752c5f8e17.1747839857.git.dvyukov@google.com \
--to=dvyukov@google.com \
--cc=elver@google.com \
--cc=gregory.price@memverge.com \
--cc=keescook@chromium.org \
--cc=krisman@collabora.com \
--cc=linux-kernel@vger.kernel.org \
--cc=luto@kernel.org \
--cc=peterz@infradead.org \
--cc=tglx@linutronix.de \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox
all inboxes | Powered by JetHome®