mirror of https://lore.kernel.org/lkml/
 help / color / mirror / Atom feed
From: Han Gao <gaohan@iscas.ac.cn>
To: Rob Herring <robh@kernel.org>,
	Krzysztof Kozlowski <krzk+dt@kernel.org>,
	Conor Dooley <conor+dt@kernel.org>,
	Paul Walmsley <pjw@kernel.org>,
	Palmer Dabbelt <palmer@dabbelt.com>,
	Albert Ou <aou@eecs.berkeley.edu>,
	Alexandre Ghiti <alex@ghiti.fr>, Yixun Lan <dlan@kernel.org>,
	Chukun Pan <amadeus@jmu.edu.cn>
Cc: devicetree@vger.kernel.org, linux-riscv@lists.infradead.org,
	spacemit@lists.linux.dev, linux-kernel@vger.kernel.org,
	Han Gao <rabenda.cn@gmail.com>, Han Gao <gaohan@iscas.ac.cn>,
	Vincent Legoll <legoll@online.fr>
Subject: [PATCH v10 3/3] riscv: dts: spacemit: Enable USB3.0/PCIe on OrangePi RV2
Date: Tue,  7 Apr 2026 23:28:16 +0800	[thread overview]
Message-ID: <8e397efb06efd9b02788df07f435ce153de05cd5.1775575436.git.gaohan@iscas.ac.cn> (raw)
In-Reply-To: <cover.1775575436.git.gaohan@iscas.ac.cn>

Enable the DWC3 USB 3.0 controller and its associated usbphy2 on the
OrangePi RV2 board.

The board utilizes a Genesys Logic GL3523 USB3.0 hub.

Define a 3.3v fixed voltage regulator for PCIe and enable PCIe and
PHY-related Device Tree nodes for the OrangePi RV2.

Co-developed-by: Chukun Pan <amadeus@jmu.edu.cn>
Signed-off-by: Chukun Pan <amadeus@jmu.edu.cn>
Tested-by: Vincent Legoll <legoll@online.fr> # OrangePi-RV2
Signed-off-by: Han Gao <gaohan@iscas.ac.cn>
---
 .../boot/dts/spacemit/k1-orangepi-rv2.dts     | 80 +++++++++++++++++++
 1 file changed, 80 insertions(+)

diff --git a/arch/riscv/boot/dts/spacemit/k1-orangepi-rv2.dts b/arch/riscv/boot/dts/spacemit/k1-orangepi-rv2.dts
index f7a1dadaa95f..3a829e3c9cbc 100644
--- a/arch/riscv/boot/dts/spacemit/k1-orangepi-rv2.dts
+++ b/arch/riscv/boot/dts/spacemit/k1-orangepi-rv2.dts
@@ -23,6 +23,16 @@ chosen {
 		stdout-path = "serial0";
 	};
 
+	pcie_vcc3v3: regulator-pcie-vcc3v3 {
+		compatible = "regulator-fixed";
+		enable-active-high;
+		gpios = <&gpio K1_GPIO(116) GPIO_ACTIVE_HIGH>;
+		regulator-name = "pcie_vcc3v3";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		vin-supply = <&vcc_5v0>;
+	};
+
 	vcc_5v0: regulator-vcc-5v0 {
 		compatible = "regulator-fixed";
 		regulator-name = "vcc_5v0";
@@ -42,6 +52,16 @@ vcc4v0: regulator-vcc4v0 {
 		vin-supply = <&vcc_5v0>;
 	};
 
+	vcc5v0_usb30: regulator-vcc5v0-usb30 {
+		compatible = "regulator-fixed";
+		enable-active-high;
+		gpios = <&gpio K1_GPIO(123) GPIO_ACTIVE_HIGH>;
+		regulator-name = "vcc5v0_usb30";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		vin-supply = <&vcc_5v0>;
+	};
+
 	leds {
 		compatible = "gpio-leds";
 
@@ -54,6 +74,10 @@ led1 {
 	};
 };
 
+&combo_phy {
+	status = "okay";
+};
+
 &eth0 {
 	phy-handle = <&rgmii0>;
 	phy-mode = "rgmii-id";
@@ -224,8 +248,64 @@ dldo7 {
 	};
 };
 
+&pcie1_phy {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pcie1_3_cfg>;
+	status = "okay";
+};
+
+&pcie1_port {
+	phys = <&pcie1_phy>;
+	vpcie3v3-supply = <&pcie_vcc3v3>;
+};
+
+&pcie1 {
+	status = "okay";
+};
+
+&pcie2_phy {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pcie2_4_cfg>;
+	status = "okay";
+};
+
+&pcie2_port {
+	phys = <&pcie2_phy>;
+	vpcie3v3-supply = <&pcie_vcc3v3>;
+};
+
+&pcie2 {
+	status = "okay";
+};
+
 &uart0 {
 	pinctrl-names = "default";
 	pinctrl-0 = <&uart0_2_cfg>;
 	status = "okay";
 };
+
+&usbphy2 {
+	status = "okay";
+};
+
+&usb_dwc3 {
+	dr_mode = "host";
+	#address-cells = <1>;
+	#size-cells = <0>;
+	vbus-supply = <&vcc5v0_usb30>;
+	status = "okay";
+
+	hub_2_0: hub@1 {
+		compatible = "usb5e3,610";
+		reg = <0x1>;
+		peer-hub = <&hub_3_0>;
+		vdd-supply = <&vcc_5v0>;
+	};
+
+	hub_3_0: hub@2 {
+		compatible = "usb5e3,620";
+		reg = <0x2>;
+		peer-hub = <&hub_2_0>;
+		vdd-supply = <&vcc_5v0>;
+	};
+};
-- 
2.47.3


  parent reply	other threads:[~2026-04-07 15:29 UTC|newest]

Thread overview: 6+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2026-04-07 15:28 [PATCH v10 0/3] riscv: dts: spacemit: Add PMIC regulators usb pcie Han Gao
2026-04-07 15:28 ` [PATCH v10 1/3] riscv: dts: spacemit: Enable i2c8 adapter for OrangePi RV2 Han Gao
2026-04-07 15:28 ` [PATCH v10 2/3] riscv: dts: spacemit: Define the P1 PMIC regulators " Han Gao
2026-04-07 15:28 ` Han Gao [this message]
2026-04-09  3:39 ` [PATCH v10 0/3] riscv: dts: spacemit: Add PMIC regulators usb pcie Yixun Lan
2026-04-30  2:15 ` Yixun Lan

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=8e397efb06efd9b02788df07f435ce153de05cd5.1775575436.git.gaohan@iscas.ac.cn \
    --to=gaohan@iscas.ac.cn \
    --cc=alex@ghiti.fr \
    --cc=amadeus@jmu.edu.cn \
    --cc=aou@eecs.berkeley.edu \
    --cc=conor+dt@kernel.org \
    --cc=devicetree@vger.kernel.org \
    --cc=dlan@kernel.org \
    --cc=krzk+dt@kernel.org \
    --cc=legoll@online.fr \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-riscv@lists.infradead.org \
    --cc=palmer@dabbelt.com \
    --cc=pjw@kernel.org \
    --cc=rabenda.cn@gmail.com \
    --cc=robh@kernel.org \
    --cc=spacemit@lists.linux.dev \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox

all inboxes | Powered by JetHome®