From: Paolo Abeni <pabeni@redhat.com>
To: Prabhakar <prabhakar.csengg@gmail.com>,
Andrew Lunn <andrew+netdev@lunn.ch>,
"David S. Miller" <davem@davemloft.net>,
Eric Dumazet <edumazet@google.com>,
Jakub Kicinski <kuba@kernel.org>, Rob Herring <robh@kernel.org>,
Krzysztof Kozlowski <krzk+dt@kernel.org>,
Conor Dooley <conor+dt@kernel.org>,
Philipp Zabel <p.zabel@pengutronix.de>,
Geert Uytterhoeven <geert+renesas@glider.be>,
"Russell King (Oracle)" <rmk+kernel@armlinux.org.uk>,
Giuseppe Cavallaro <peppe.cavallaro@st.com>,
Jose Abreu <joabreu@synopsys.com>,
Alexandre Torgue <alexandre.torgue@foss.st.com>
Cc: netdev@vger.kernel.org, devicetree@vger.kernel.org,
linux-kernel@vger.kernel.org, linux-renesas-soc@vger.kernel.org,
Biju Das <biju.das.jz@bp.renesas.com>,
Fabrizio Castro <fabrizio.castro.jz@renesas.com>,
Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com>
Subject: Re: [PATCH net-next v3 3/3] net: stmmac: Add DWMAC glue layer for Renesas GBETH
Date: Tue, 18 Mar 2025 12:49:00 +0100 [thread overview]
Message-ID: <8e804715-3123-4ab5-94ce-625060df4835@redhat.com> (raw)
In-Reply-To: <20250311221730.40720-4-prabhakar.mahadev-lad.rj@bp.renesas.com>
On 3/11/25 11:17 PM, Prabhakar wrote:
> @@ -0,0 +1,166 @@
> +// SPDX-License-Identifier: GPL-2.0+
> +/*
> + * dwmac-renesas-gbeth.c - DWMAC Specific Glue layer for Renesas GBETH
> + *
> + * The Rx and Tx clocks are supplied as follows for the GBETH IP.
> + *
> + * Rx / Tx
> + * -------+------------- on / off -------
> + * |
> + * | Rx-180 / Tx-180
> + * +---- not ---- on / off -------
> + *
> + * Copyright (C) 2025 Renesas Electronics Corporation
> + */
> +
> +#include <linux/clk.h>
> +#include <linux/device.h>
> +#include <linux/module.h>
> +#include <linux/platform_device.h>
> +#include <linux/reset.h>
> +
> +#include "dwmac4.h"
> +#include "stmmac_platform.h"
> +
> +struct renesas_gbeth {
> + struct plat_stmmacenet_data *plat_dat;
> + struct reset_control *rstc;
> + struct device *dev;
> + void __iomem *regs;
> +};
> +
> +static const char *const renesas_gbeth_clks[] = {
> + "tx", "tx-180", "rx", "rx-180",
> +};
> +
> +static struct clk *renesas_gbeth_find_clk(struct plat_stmmacenet_data *plat_dat,
> + const char *name)
> +{
> + for (unsigned int i = 0; i < plat_dat->num_clks; i++)
> + if (!strcmp(plat_dat->clks[i].id, name))
> + return plat_dat->clks[i].clk;
> +
> + return NULL;
> +}
> +
> +static int renesas_gbeth_clks_config(void *priv, bool enabled)
> +{
> + struct renesas_gbeth *gbeth = priv;
> + struct plat_stmmacenet_data *plat_dat = gbeth->plat_dat;
Minor nit: please respect the reverse christmas tree order above:
struct plat_stmmacenet_data *plat_dat;
struct renesas_gbeth *gbeth = priv;
and init plat_dat later.
> + int ret;
> +
> + if (enabled) {
> + ret = reset_control_deassert(gbeth->rstc);
> + if (ret) {
> + dev_err(gbeth->dev, "Reset deassert failed\n");
> + return ret;
> + }
> +
> + ret = clk_bulk_prepare_enable(plat_dat->num_clks, plat_dat->clks);
> + if (ret)
> + reset_control_assert(gbeth->rstc);
> + } else {
> + clk_bulk_disable_unprepare(plat_dat->num_clks, plat_dat->clks);
> + ret = reset_control_assert(gbeth->rstc);
> + if (ret)
> + dev_err(gbeth->dev, "Reset assert failed\n");
> + }
> +
> + return ret;
> +}
> +
> +static int renesas_gbeth_probe(struct platform_device *pdev)
> +{
> + struct plat_stmmacenet_data *plat_dat;
> + struct stmmac_resources stmmac_res;
> + struct device *dev = &pdev->dev;
> + struct renesas_gbeth *gbeth;
> + unsigned int i;
> + int err;
> +
> + err = stmmac_get_platform_resources(pdev, &stmmac_res);
> + if (err)
> + return dev_err_probe(dev, err,
> + "failed to get resources\n");
> +
> + plat_dat = devm_stmmac_probe_config_dt(pdev, stmmac_res.mac);
> + if (IS_ERR(plat_dat))
> + return dev_err_probe(dev, PTR_ERR(plat_dat),
> + "dt configuration failed\n");
> +
> + gbeth = devm_kzalloc(dev, sizeof(*gbeth), GFP_KERNEL);
> + if (!gbeth)
> + return -ENOMEM;
> +
> + plat_dat->num_clks = ARRAY_SIZE(renesas_gbeth_clks);
> + plat_dat->clks = devm_kcalloc(dev, plat_dat->num_clks,
> + sizeof(*plat_dat->clks), GFP_KERNEL);
> + if (!plat_dat->clks)
> + return -ENOMEM;
> +
> + for (i = 0; i < plat_dat->num_clks; i++)
> + plat_dat->clks[i].id = renesas_gbeth_clks[i];
> +
> + err = devm_clk_bulk_get(dev, plat_dat->num_clks, plat_dat->clks);
> + if (err < 0)
> + return err;
> +
> + plat_dat->clk_tx_i = renesas_gbeth_find_clk(plat_dat, "tx");
> + if (!plat_dat->clk_tx_i)
> + return dev_err_probe(dev, -EINVAL,
> + "error finding tx clock\n");
> +
> + gbeth->rstc = devm_reset_control_get_exclusive(dev, NULL);
> + if (IS_ERR(gbeth->rstc))
> + return PTR_ERR(gbeth->rstc);
> +
> + gbeth->dev = dev;
> + gbeth->regs = stmmac_res.addr;
> + gbeth->plat_dat = plat_dat;
> + plat_dat->bsp_priv = gbeth;
> + plat_dat->set_clk_tx_rate = stmmac_set_clk_tx_rate;
> + plat_dat->clks_config = renesas_gbeth_clks_config;
> + plat_dat->flags |= STMMAC_FLAG_HWTSTAMP_CORRECT_LATENCY |
> + STMMAC_FLAG_EN_TX_LPI_CLK_PHY_CAP |
The above does not compile:
../drivers/net/ethernet/stmicro/stmmac/dwmac-renesas-gbeth.c:124:7:
error: use of undeclared identifier 'STMMAC_FLAG_EN_TX_LPI_CLK_PHY_CAP'
> + STMMAC_FLAG_SPH_DISABLE;
> +
> + err = renesas_gbeth_clks_config(gbeth, true);
> + if (err)
> + return err;
> +
> + err = stmmac_dvr_probe(dev, plat_dat, &stmmac_res);
> + if (err) {
> + renesas_gbeth_clks_config(gbeth, false);
> + return err;
Just:
if (err)
renesas_gbeth_clks_config(gbeth, false);
return err;
Thanks,
Paolo
next prev parent reply other threads:[~2025-03-18 11:49 UTC|newest]
Thread overview: 9+ messages / expand[flat|nested] mbox.gz Atom feed top
2025-03-11 22:17 [PATCH net-next v3 0/3] Add GBETH glue layer driver for Renesas RZ/V2H(P) SoC Prabhakar
2025-03-11 22:17 ` [PATCH net-next v3 1/3] dt-bindings: net: dwmac: Increase 'maxItems' for 'interrupts' and 'interrupt-names' Prabhakar
2025-03-12 13:16 ` Rob Herring
2025-03-14 2:22 ` Lad, Prabhakar
2025-03-11 22:17 ` [PATCH net-next v3 2/3] dt-bindings: net: Document support for Renesas RZ/V2H(P) GBETH Prabhakar
2025-03-11 22:17 ` [PATCH net-next v3 3/3] net: stmmac: Add DWMAC glue layer for Renesas GBETH Prabhakar
2025-03-18 11:49 ` Paolo Abeni [this message]
2025-03-18 12:05 ` Russell King (Oracle)
2025-03-18 12:23 ` Lad, Prabhakar
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=8e804715-3123-4ab5-94ce-625060df4835@redhat.com \
--to=pabeni@redhat.com \
--cc=alexandre.torgue@foss.st.com \
--cc=andrew+netdev@lunn.ch \
--cc=biju.das.jz@bp.renesas.com \
--cc=conor+dt@kernel.org \
--cc=davem@davemloft.net \
--cc=devicetree@vger.kernel.org \
--cc=edumazet@google.com \
--cc=fabrizio.castro.jz@renesas.com \
--cc=geert+renesas@glider.be \
--cc=joabreu@synopsys.com \
--cc=krzk+dt@kernel.org \
--cc=kuba@kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-renesas-soc@vger.kernel.org \
--cc=netdev@vger.kernel.org \
--cc=p.zabel@pengutronix.de \
--cc=peppe.cavallaro@st.com \
--cc=prabhakar.csengg@gmail.com \
--cc=prabhakar.mahadev-lad.rj@bp.renesas.com \
--cc=rmk+kernel@armlinux.org.uk \
--cc=robh@kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox
all inboxes | Powered by JetHome®