mirror of https://lore.kernel.org/lkml/
 help / color / mirror / Atom feed
From: Roger Quadros <rogerq@kernel.org>
To: MD Danish Anwar <danishanwar@ti.com>,
	conor+dt@kernel.org, krzk+dt@kernel.org, robh@kernel.org,
	ssantosh@kernel.org, nm@ti.com,
	Vignesh Raghavendra <vigneshr@ti.com>
Cc: devicetree@vger.kernel.org, linux-arm-kernel@lists.infradead.org,
	linux-kernel@vger.kernel.org, s-anna@ti.com, kristo@kernel.org,
	srk@ti.com
Subject: Re: [PATCH v3 2/2] arm64: dts: ti: k3-am64-main: Switch ICSSG clock to core clock
Date: Tue, 19 Nov 2024 12:47:03 +0200	[thread overview]
Message-ID: <8f3f0fac-d6f7-4962-b2ca-1b3186a74ebe@kernel.org> (raw)
In-Reply-To: <20241113110955.3876045-3-danishanwar@ti.com>



On 13/11/2024 13:09, MD Danish Anwar wrote:
> ICSSG has 7 available clocks per instance. Add all the cloks to ICSSG
> nodes. ICSSG currently uses ICSSG_ICLK (clk id 20) which operates at
> 250MHz. Switch ICSSG clock to ICSSG_CORE clock (clk id 0) which operates at
> 333MHz.
> 
> ICSSG_CORE clock will help get the most out of ICSSG as more cycles are
> needed to fully support all ICSSG features.
> 
> This commit also changes assigned-clock-parents of coreclk-mux to
> ICSSG_CORE clock from ICSSG_ICLK.
> 
> Performance update in dual mac mode
>   With ICSSG_CORE Clk @ 333MHz
>     Tx throughput - 934 Mbps
>     Rx throughput - 914 Mbps,
> 
>   With ICSSG_ICLK clk @ 250MHz,
>     Tx throughput - 920 Mbps
>     Rx throughput - 706 Mbps
> 
> Signed-off-by: MD Danish Anwar <danishanwar@ti.com>
> ---
>  arch/arm64/boot/dts/ti/k3-am64-main.dtsi | 22 ++++++++++++++++++++--

What about other platforms that have ICSSG?
e.g. k3-am65-main.dtsi and k3-j721e-main.dtsi

>  1 file changed, 20 insertions(+), 2 deletions(-)
> 
> diff --git a/arch/arm64/boot/dts/ti/k3-am64-main.dtsi b/arch/arm64/boot/dts/ti/k3-am64-main.dtsi
> index c66289a4362b..324eb44c258d 100644
> --- a/arch/arm64/boot/dts/ti/k3-am64-main.dtsi
> +++ b/arch/arm64/boot/dts/ti/k3-am64-main.dtsi
> @@ -1227,6 +1227,15 @@ icssg0: icssg@30000000 {
>  		#address-cells = <1>;
>  		#size-cells = <1>;
>  		ranges = <0x0 0x00 0x30000000 0x80000>;
> +		clocks = <&k3_clks 81 0>,  /* icssg0_core_clk */
> +			 <&k3_clks 81 3>,  /* icssg0_iep_clk */
> +			 <&k3_clks 81 16>, /* icssg0_rgmii_mhz_250_clk */
> +			 <&k3_clks 81 17>, /* icssg0_rgmii_mhz_50_clk */
> +			 <&k3_clks 81 18>, /* icssg0_rgmii_mhz_5_clk */
> +			 <&k3_clks 81 19>, /* icssg0_uart_clk */
> +			 <&k3_clks 81 20>; /* icssg0_iclk */
> +		assigned-clocks = <&k3_clks 81 0>;
> +		assigned-clock-parents = <&k3_clks 81 2>;
>  
>  		icssg0_mem: memories@0 {
>  			reg = <0x0 0x2000>,
> @@ -1252,7 +1261,7 @@ icssg0_coreclk_mux: coreclk-mux@3c {
>  					clocks = <&k3_clks 81 0>,  /* icssg0_core_clk */
>  						 <&k3_clks 81 20>; /* icssg0_iclk */
>  					assigned-clocks = <&icssg0_coreclk_mux>;
> -					assigned-clock-parents = <&k3_clks 81 20>;
> +					assigned-clock-parents = <&k3_clks 81 0>;
>  				};
>  
>  				icssg0_iepclk_mux: iepclk-mux@30 {
> @@ -1397,6 +1406,15 @@ icssg1: icssg@30080000 {
>  		#address-cells = <1>;
>  		#size-cells = <1>;
>  		ranges = <0x0 0x00 0x30080000 0x80000>;
> +		clocks = <&k3_clks 82 0>,  /* icssg1_core_clk */
> +			 <&k3_clks 82 3>,  /* icssg1_iep_clk */
> +			 <&k3_clks 82 16>, /* icssg1_rgmii_mhz_250_clk */
> +			 <&k3_clks 82 17>, /* icssg1_rgmii_mhz_50_clk */
> +			 <&k3_clks 82 18>, /* icssg1_rgmii_mhz_5_clk */
> +			 <&k3_clks 82 19>, /* icssg1_uart_clk */
> +			 <&k3_clks 82 20>; /* icssg1_iclk */
> +		assigned-clocks = <&k3_clks 82 0>;
> +		assigned-clock-parents = <&k3_clks 82 2>;
>  
>  		icssg1_mem: memories@0 {
>  			reg = <0x0 0x2000>,
> @@ -1422,7 +1440,7 @@ icssg1_coreclk_mux: coreclk-mux@3c {
>  					clocks = <&k3_clks 82 0>,   /* icssg1_core_clk */
>  						 <&k3_clks 82 20>;  /* icssg1_iclk */
>  					assigned-clocks = <&icssg1_coreclk_mux>;
> -					assigned-clock-parents = <&k3_clks 82 20>;
> +					assigned-clock-parents = <&k3_clks 82 0>;
>  				};
>  
>  				icssg1_iepclk_mux: iepclk-mux@30 {

-- 
cheers,
-roger


  reply	other threads:[~2024-11-19 10:47 UTC|newest]

Thread overview: 16+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2024-11-13 11:09 [PATCH v3 0/2] Add Clocks for ICSSG MD Danish Anwar
2024-11-13 11:09 ` [PATCH v3 1/2] dt-bindings: soc: ti: pruss: Add clocks " MD Danish Anwar
2024-11-14 20:11   ` Conor Dooley
2024-11-18 13:33   ` Roger Quadros
2024-11-18 13:52     ` Roger Quadros
2024-11-19  6:12       ` Vignesh Raghavendra
2024-11-19 10:45         ` Roger Quadros
2024-11-20 13:23           ` Anwar, Md Danish
2024-11-21 13:08             ` Roger Quadros
2024-11-21 13:10   ` Roger Quadros
2024-11-13 11:09 ` [PATCH v3 2/2] arm64: dts: ti: k3-am64-main: Switch ICSSG clock to core clock MD Danish Anwar
2024-11-19 10:47   ` Roger Quadros [this message]
2024-11-20 12:52   ` Wadim Egorov
2024-11-21 13:13   ` Roger Quadros
2024-12-16 10:23 ` [PATCH v3 0/2] Add Clocks for ICSSG MD Danish Anwar
2024-12-26 20:31 ` Nishanth Menon

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=8f3f0fac-d6f7-4962-b2ca-1b3186a74ebe@kernel.org \
    --to=rogerq@kernel.org \
    --cc=conor+dt@kernel.org \
    --cc=danishanwar@ti.com \
    --cc=devicetree@vger.kernel.org \
    --cc=kristo@kernel.org \
    --cc=krzk+dt@kernel.org \
    --cc=linux-arm-kernel@lists.infradead.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=nm@ti.com \
    --cc=robh@kernel.org \
    --cc=s-anna@ti.com \
    --cc=srk@ti.com \
    --cc=ssantosh@kernel.org \
    --cc=vigneshr@ti.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox

Powered by JetHome