Re: [PATCH V6 0/5] Add camera clock controller support for SM8550

[Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>]

On 31/08/2023 10:20, Jagadeesh Kona wrote:
> 
> 
> On 7/7/2023 9:27 AM, Jagadeesh Kona wrote:
>> Add bindings, driver and devicetree node for camera clock controller on
>> SM8550.
>>
>> Changes in v6:
>>   - Updated parent map and frequency table of cam_cc_xo_clk_src to use
>>     active only source P_BI_TCXO_AO instead of P_BI_TCXO
>>
>> Changes in v5:
>>   - Added clk_lucid_ole_pll_configure() to configure lucid ole PLL's
>>   - Used module_platform_driver() instead of subsys_initcall()
>>   - Fixed overloading .l config with CAL_L and RINGOSC_CAL_L fields
>>
>> Changes in v4:
>>   - Dropped the extra patches added in v2, since the review comments on
>>     v3 recommended an alternate solution
>>
>> Changes in v3:
>>   - Squashed 2 extra patches added in v2 into single patch as per review
>>     comments
>>
>> Changes in v2:
>>   - Took care of review comments from v1
>>       + Removed new YAML file and reused SM8450 CAMCC YAML file for SM8550
>>       + Sorted the PLL names in proper order
>>       + Updated all PLL configurations to lower case hex
>>       + Reused evo ops instead of adding new ops for ole pll
>>       + Moved few clocks to separate patch to fix patch too long error
>>       + Padded non-zero address part to 8 hex digits in DT change
>>   - Added 2 extra patches updating .l config value across chipsets to
>>     include CAL_L and RINGOSC_CAL_L fields and removed setting CAL_L
>>     field explicitly in clk_lucid_evo_pll_configure().
>>
>> v1:
>>    - Initial CAMCC changes for SM8550
>>
>> Previous series:
>> v5 - https://patchwork.kernel.org/project/linux-clk/list/?series=759863
>> v4 - https://patchwork.kernel.org/project/linux-clk/list/?series=755683
>> v3 - https://patchwork.kernel.org/project/linux-clk/list/?series=753150
>> v2 - https://patchwork.kernel.org/project/linux-clk/list/?series=751058
>> v1 - https://patchwork.kernel.org/project/linux-clk/list/?series=749294
>>
>> Jagadeesh Kona (5):
>>    dt-bindings: clock: qcom: Add SM8550 camera clock controller
>>    clk: qcom: clk-alpha-pll: Add support for lucid ole pll configure
>>    clk: qcom: camcc-sm8550: Add camera clock controller driver for SM8550
>>    clk: qcom: camcc-sm8550: Add support for qdss, sleep and xo clocks
>>    arm64: dts: qcom: sm8550: Add camera clock controller
>>
>>   .../bindings/clock/qcom,sm8450-camcc.yaml     |    8 +-
>>   arch/arm64/boot/dts/qcom/sm8550.dtsi          |   15 +
>>   drivers/clk/qcom/Kconfig                      |    7 +
>>   drivers/clk/qcom/Makefile                     |    1 +
>>   drivers/clk/qcom/camcc-sm8550.c               | 3564 +++++++++++++++++
>>   drivers/clk/qcom/clk-alpha-pll.c              |   29 +
>>   drivers/clk/qcom/clk-alpha-pll.h              |    2 +
>>   include/dt-bindings/clock/qcom,sm8550-camcc.h |  187 +
>>   8 files changed, 3811 insertions(+), 2 deletions(-)
>>   create mode 100644 drivers/clk/qcom/camcc-sm8550.c
>>   create mode 100644 include/dt-bindings/clock/qcom,sm8550-camcc.h
>>
> 
> Hi Bjorn,
> 
> All patches in this series are in reviewed state, could you please help 
> to pick this series in the next release? Thanks!

We are in merge window, so please refrain from simple pings for
patchsets which are not fixes.

Best regards,
Krzysztof