Re: [PATCH v3 2/2] ARM: dts: aspeed: Harma: revise sgpio line name

[Andrew Jeffery <andrew@codeconstruct.com.au>]

On Mon, 2024-09-09 at 16:04 +0800, Peter Yin wrote:
> power-card-enable
> power-fault-n
> power-hsc-good
> power-chassis-good
> 
> asic0-card-type-detection0-n
> asic0-card-type-detection1-n
> asic0-card-type-detection2-n
> presence-cmm
> 
> uart-switch-button
> uart-switch-lsb
> uart-switch-msb
> 
> reset-control-cmos-clear

Can you please try to be more descriptive in the future? However, for
now, I've applied the series to be picked up through the BMC tree.

Andrew

> 
> Signed-off-by: Peter Yin <peteryin.openbmc@gmail.com>
> ---
>  .../dts/aspeed/aspeed-bmc-facebook-harma.dts  | 36 +++++++++----------
>  1 file changed, 16 insertions(+), 20 deletions(-)
> 
> diff --git a/arch/arm/boot/dts/aspeed/aspeed-bmc-facebook-harma.dts b/arch/arm/boot/dts/aspeed/aspeed-bmc-facebook-harma.dts
> index 92068c65eae4..9cb511a846e3 100644
> --- a/arch/arm/boot/dts/aspeed/aspeed-bmc-facebook-harma.dts
> +++ b/arch/arm/boot/dts/aspeed/aspeed-bmc-facebook-harma.dts
> @@ -393,12 +393,6 @@ gpio@31 {
>  		reg = <0x31>;
>  		gpio-controller;
>  		#gpio-cells = <2>;
> -
> -		gpio-line-names =
> -		"","","","",
> -		"","","presence-cmm","",
> -		"","","","",
> -		"","","","";
>  	};
>  
>  	// PTTV FRU
> @@ -422,12 +416,6 @@ gpio@31 {
>  		reg = <0x31>;
>  		gpio-controller;
>  		#gpio-cells = <2>;
> -
> -		gpio-line-names =
> -		"","","","",
> -		"","","presence-cmm","",
> -		"","","","",
> -		"","","","";
>  	};
>  
>  	// Aegis FRU
> @@ -566,7 +554,7 @@ &gpio0 {
>  	/*B0-B7*/	"","","","",
>  			"bmc-spi-mux-select-0","led-identify","","",
>  	/*C0-C7*/	"reset-cause-platrst","","","","",
> -			"cpu0-err-alert","","",
> +			"power-hsc-good","power-chassis-good","",
>  	/*D0-D7*/	"","","sol-uart-select","","","","","",
>  	/*E0-E7*/	"","","","","","","","",
>  	/*F0-F7*/	"","","","","","","","",
> @@ -585,14 +573,16 @@ &gpio0 {
>  	/*O0-O7*/	"","","","","","","","",
>  	/*P0-P7*/	"power-button","power-host-control",
>  			"reset-button","","led-power","","","",
> -	/*Q0-Q7*/	"","","","","","power-chassis-control","","",
> +	/*Q0-Q7*/
> +			"","","","",
> +			"","power-chassis-control","","uart-switch-button",
>  	/*R0-R7*/	"","","","","","","","",
>  	/*S0-S7*/	"","","","","","","","",
>  	/*T0-T7*/	"","","","","","","","",
>  	/*U0-U7*/	"","","","","","","led-identify-gate","",
>  	/*V0-V7*/	"","","","",
>  			"rtc-battery-voltage-read-enable","",
> -			"power-chassis-good","",
> +			"","",
>  	/*W0-W7*/	"","","","","","","","",
>  	/*X0-X7*/	"","","","","","","","",
>  	/*Y0-Y7*/	"","","","","","","","",
> @@ -673,7 +663,7 @@ &sgpiom0 {
>  	"presence-asic-modules-0","rt-cpu0-p1-force-enable",
>  	"presence-asic-modules-1","bios-debug-msg-disable",
>  	"","uart-control-buffer-select",
> -	"","ac-control-n",
> +	"presence-cmm","ac-control-n",
>  	/*G0-G3 line 96-103*/
>  	"FM_CPU_CORETYPE2","",
>  	"FM_CPU_CORETYPE1","",
> @@ -685,7 +675,7 @@ &sgpiom0 {
>  	"FM_BOARD_REV_ID2","",
>  	"FM_BOARD_REV_ID1","",
>  	/*H0-H3 line 112-119*/
> -	"FM_BOARD_REV_ID0","",
> +	"FM_BOARD_REV_ID0","reset-control-cmos-clear",
>  	"","","","","","",
>  	/*H4-H7 line 120-127*/
>  	"","",
> @@ -700,7 +690,7 @@ &sgpiom0 {
>  	/*I4-I7 line 136-143*/
>  	"","","","","","","","",
>  	/*J0-J3 line 144-151*/
> -	"","","","","","","","",
> +	"","","power-card-enable","","","","","",
>  	/*J4-J7 line 152-159*/
>  	"SLOT_ID_BCB_0","",
>  	"SLOT_ID_BCB_1","",
> @@ -716,9 +706,15 @@ &sgpiom0 {
>  	"cpu0-thermtrip-alert","",
>  	"reset-cause-pcie","",
>  	/*L4-L7 line 184-191*/
> -	"pvdd11-ocp-alert","","","","","","","",
> +	"pvdd11-ocp-alert","",
> +	"power-fault-n","",
> +	"asic0-card-type-detection0-n","",
> +	"asic0-card-type-detection1-n","",
>  	/*M0-M3 line 192-199*/
> -	"","","","","","","","",
> +	"asic0-card-type-detection2-n","",
> +	"uart-switch-lsb","",
> +	"uart-switch-msb","",
> +	"","",
>  	/*M4-M7 line 200-207*/
>  	"","","","","","","","",
>  	/*N0-N3 line 208-215*/