mirror of https://lore.kernel.org/lkml/
 help / color / mirror / Atom feed
From: Praneesh P <quic_ppranees@quicinc.com>
To: Remi Pommarel <repk@triplefau.lt>, <ath11k@lists.infradead.org>,
	<linux-wireless@vger.kernel.org>, <linux-kernel@vger.kernel.org>
Cc: Kalle Valo <kvalo@kernel.org>, Jeff Johnson <jjohnson@kernel.org>
Subject: Re: [PATCH v2] wifi: ath11k: Fix invalid ring usage in full monitor mode
Date: Tue, 15 Oct 2024 17:13:20 +0530	[thread overview]
Message-ID: <918f03b4-cce5-44cb-9991-bfe20f04c498@quicinc.com> (raw)
In-Reply-To: <20240924194119.15942-1-repk@triplefau.lt>



On 9/25/2024 1:11 AM, Remi Pommarel wrote:
> On full monitor HW the monitor destination rxdma ring does not have the
> same descriptor format as in the "classical" mode. The full monitor
> destination entries are of hal_sw_monitor_ring type and fetched using
> ath11k_dp_full_mon_process_rx while the classical ones are of type
> hal_reo_entrance_ring and fetched with ath11k_dp_rx_mon_dest_process.
> 
> Although both hal_sw_monitor_ring and hal_reo_entrance_ring are of same
> size, the offset to useful info (such as sw_cookie, paddr, etc) are
> different. Thus if ath11k_dp_rx_mon_dest_process gets called on full
> monitor destination ring, invalid skb buffer id will be fetched from DMA
> ring causing issues such as the following rcu_sched stall:
> 
>   rcu: INFO: rcu_sched self-detected stall on CPU
>   rcu:     0-....: (1 GPs behind) idle=c67/0/0x7 softirq=45768/45769 fqs=1012
>    (t=2100 jiffies g=14817 q=8703)
>   Task dump for CPU 0:
>   task:swapper/0       state:R  running task     stack: 0 pid:    0 ppid:     0 flags:0x0000000a
>   Call trace:
>    dump_backtrace+0x0/0x160
>    show_stack+0x14/0x20
>    sched_show_task+0x158/0x184
>    dump_cpu_task+0x40/0x4c
>    rcu_dump_cpu_stacks+0xec/0x12c
>    rcu_sched_clock_irq+0x6c8/0x8a0
>    update_process_times+0x88/0xd0
>    tick_sched_timer+0x74/0x1e0
>    __hrtimer_run_queues+0x150/0x204
>    hrtimer_interrupt+0xe4/0x240
>    arch_timer_handler_phys+0x30/0x40
>    handle_percpu_devid_irq+0x80/0x130
>    handle_domain_irq+0x5c/0x90
>    gic_handle_irq+0x8c/0xb4
>    do_interrupt_handler+0x30/0x54
>    el1_interrupt+0x2c/0x4c
>    el1h_64_irq_handler+0x14/0x1c
>    el1h_64_irq+0x74/0x78
>    do_raw_spin_lock+0x60/0x100
>    _raw_spin_lock_bh+0x1c/0x2c
>    ath11k_dp_rx_mon_mpdu_pop.constprop.0+0x174/0x650
>    ath11k_dp_rx_process_mon_status+0x8b4/0xa80
>    ath11k_dp_rx_process_mon_rings+0x244/0x510
>    ath11k_dp_service_srng+0x190/0x300
>    ath11k_pcic_ext_grp_napi_poll+0x30/0xc0
>    __napi_poll+0x34/0x174
>    net_rx_action+0xf8/0x2a0
>    _stext+0x12c/0x2ac
>    irq_exit+0x94/0xc0
>    handle_domain_irq+0x60/0x90
>    gic_handle_irq+0x8c/0xb4
>    call_on_irq_stack+0x28/0x44
>    do_interrupt_handler+0x4c/0x54
>    el1_interrupt+0x2c/0x4c
>    el1h_64_irq_handler+0x14/0x1c
>    el1h_64_irq+0x74/0x78
>    arch_cpu_idle+0x14/0x20
>    do_idle+0xf0/0x130
>    cpu_startup_entry+0x24/0x50
>    rest_init+0xf8/0x104
>    arch_call_rest_init+0xc/0x14
>    start_kernel+0x56c/0x58c
>    __primary_switched+0xa0/0xa8
> 
> Thus ath11k_dp_rx_mon_dest_process(), which use classical destination
> entry format, should no be called on full monitor capable HW.
>
Thanks, it looks good to me.
Reviewed-by: Praneesh P <quic_ppranees@quicinc.com>
> Fixes: 67a9d399fcb0 ("ath11k: enable RX PPDU stats in monitor co-exist mode")
> Signed-off-by: Remi Pommarel <repk@triplefau.lt>
> ---
> v2: set ppdu_status to DP_PPDU_STATUS_DONE as suggested by
>      https://lore.kernel.org/ath11k/d376023d-267a-4512-8749-f816fefeb842@quicinc.com/
> 
>   drivers/net/wireless/ath/ath11k/dp_rx.c | 7 +++++--
>   1 file changed, 5 insertions(+), 2 deletions(-)
> 
> diff --git a/drivers/net/wireless/ath/ath11k/dp_rx.c b/drivers/net/wireless/ath/ath11k/dp_rx.c
> index c087d8a0f5b2..40088e62572e 100644
> --- a/drivers/net/wireless/ath/ath11k/dp_rx.c
> +++ b/drivers/net/wireless/ath/ath11k/dp_rx.c
> @@ -5291,8 +5291,11 @@ int ath11k_dp_rx_process_mon_status(struct ath11k_base *ab, int mac_id,
>   		    hal_status == HAL_TLV_STATUS_PPDU_DONE) {
>   			rx_mon_stats->status_ppdu_done++;
>   			pmon->mon_ppdu_status = DP_PPDU_STATUS_DONE;
> -			ath11k_dp_rx_mon_dest_process(ar, mac_id, budget, napi);
> -			pmon->mon_ppdu_status = DP_PPDU_STATUS_START;
> +			if (!ab->hw_params.full_monitor_mode) {
> +				ath11k_dp_rx_mon_dest_process(ar, mac_id,
> +							      budget, napi);
> +				pmon->mon_ppdu_status = DP_PPDU_STATUS_START;
> +			}
>   		}
>   
>   		if (ppdu_info->peer_id == HAL_INVALID_PEERID ||

  reply	other threads:[~2024-10-15 11:43 UTC|newest]

Thread overview: 3+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2024-09-24 19:41 Remi Pommarel
2024-10-15 11:43 ` Praneesh P [this message]
2024-10-16 14:39 ` Jeff Johnson

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=918f03b4-cce5-44cb-9991-bfe20f04c498@quicinc.com \
    --to=quic_ppranees@quicinc.com \
    --cc=ath11k@lists.infradead.org \
    --cc=jjohnson@kernel.org \
    --cc=kvalo@kernel.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-wireless@vger.kernel.org \
    --cc=repk@triplefau.lt \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox

all inboxes | Powered by JetHome®