From: "M. Asselstine" <asselsm@mcmaster.ca>
To: "Andrew Morton" <akpm@linux-foundation.org>
Cc: "Alexander Beregalov" <a.beregalov@gmail.com>,
syrjala@sci.fi, adaplas@gmail.com,
linux-fbdev-devel@lists.sourceforge.net,
kernel-janitors@vger.kernel.org, linux-kernel@vger.kernel.org
Subject: Re: [Linux-fbdev-devel] [PATCH] atyfb_base.c: fix warning
Date: Thu, 31 Jul 2008 08:47:46 -0400 [thread overview]
Message-ID: <919fe2b30807310547k4c5c28fh1ea524bcb320865d@mail.gmail.com> (raw)
In-Reply-To: <20080731021552.2f5fe6d6.akpm@linux-foundation.org>
On Thu, Jul 31, 2008 at 5:15 AM, Andrew Morton
<akpm@linux-foundation.org> wrote:
> On Thu, 31 Jul 2008 01:03:52 +0400 Alexander Beregalov <a.beregalov@gmail.com> wrote:
>
>> From: Alexander Beregalov <a.beregalov@gmail.com>
>>
>> atyfb_base.c: fix warning
>>
>> drivers/video/aty/atyfb_base.c:2663: warning: 'aty_resume_chip' defined
>> but not used
>>
>> Signed-off-by: Alexander Beregalov <a.beregalov@gmail.com>
>> Cc: Ville Syrjala <syrjala@sci.fi>
>> Cc: Antonino A. Daplas <adaplas@pol.net>
>> ---
>>
>> drivers/video/aty/atyfb_base.c | 4 ++++
>> 1 files changed, 4 insertions(+), 0 deletions(-)
>>
>> diff --git a/drivers/video/aty/atyfb_base.c b/drivers/video/aty/atyfb_base.c
>> index 620ba81..9e5dfb1 100644
>> --- a/drivers/video/aty/atyfb_base.c
>> +++ b/drivers/video/aty/atyfb_base.c
>> @@ -244,7 +244,9 @@ static int atyfb_sync(struct fb_info *info);
>> */
>>
>> static int aty_init(struct fb_info *info);
>> +#if defined(CONFIG_PM) && defined(CONFIG_PCI)
>> static void aty_resume_chip(struct fb_info *info);
>> +#endif
>> #ifdef CONFIG_ATARI
>> static int store_video_par(char *videopar, unsigned char m64_num);
>> #endif
>> @@ -2659,6 +2661,7 @@ aty_init_exit:
>> return ret;
>> }
>>
>> +#if defined(CONFIG_PM) && defined(CONFIG_PCI)
>> static void aty_resume_chip(struct fb_info *info)
>> {
>> struct atyfb_par *par = info->par;
>> @@ -2671,6 +2674,7 @@ static void aty_resume_chip(struct fb_info *info)
>> if (par->aux_start)
>> aty_st_le32(BUS_CNTL, aty_ld_le32(BUS_CNTL, par) | BUS_APER_REG_DIS, par);
>> }
>> +#endif /* defined(CONFIG_PM) && defined(CONFIG_PCI) */
>>
>> #ifdef CONFIG_ATARI
>> static int __devinit store_video_par(char *video_str, unsigned char m64_num)
>
> OK...
>
> We don't strictly need the first ifdef - it's OK to declare a
> non-existent function, and ifdefs are ugly.
>
> But we can reorganise the code a bit more and remove the forward
> declaration altogether and remove a whole ifdef block too.
>
> How does this look?
>
Ah. Much better, this is definitely the way to go.
Mark
> drivers/video/aty/atyfb_base.c | 29 +++++++++++++++--------------
> 1 file changed, 15 insertions(+), 14 deletions(-)
>
> diff -puN drivers/video/aty/atyfb_base.c~atyfb_basec-fix-warning drivers/video/aty/atyfb_base.c
> --- a/drivers/video/aty/atyfb_base.c~atyfb_basec-fix-warning
> +++ a/drivers/video/aty/atyfb_base.c
> @@ -244,7 +244,7 @@ static int atyfb_sync(struct fb_info *in
> */
>
> static int aty_init(struct fb_info *info);
> -static void aty_resume_chip(struct fb_info *info);
> +
> #ifdef CONFIG_ATARI
> static int store_video_par(char *videopar, unsigned char m64_num);
> #endif
> @@ -2023,6 +2023,20 @@ static int atyfb_pci_suspend(struct pci_
> return 0;
> }
>
> +static void aty_resume_chip(struct fb_info *info)
> +{
> + struct atyfb_par *par = info->par;
> +
> + aty_st_le32(MEM_CNTL, par->mem_cntl, par);
> +
> + if (par->pll_ops->resume_pll)
> + par->pll_ops->resume_pll(info, &par->pll);
> +
> + if (par->aux_start)
> + aty_st_le32(BUS_CNTL,
> + aty_ld_le32(BUS_CNTL, par) | BUS_APER_REG_DIS, par);
> +}
> +
> static int atyfb_pci_resume(struct pci_dev *pdev)
> {
> struct fb_info *info = pci_get_drvdata(pdev);
> @@ -2659,19 +2673,6 @@ aty_init_exit:
> return ret;
> }
>
> -static void aty_resume_chip(struct fb_info *info)
> -{
> - struct atyfb_par *par = info->par;
> -
> - aty_st_le32(MEM_CNTL, par->mem_cntl, par);
> -
> - if (par->pll_ops->resume_pll)
> - par->pll_ops->resume_pll(info, &par->pll);
> -
> - if (par->aux_start)
> - aty_st_le32(BUS_CNTL, aty_ld_le32(BUS_CNTL, par) | BUS_APER_REG_DIS, par);
> -}
> -
> #ifdef CONFIG_ATARI
> static int __devinit store_video_par(char *video_str, unsigned char m64_num)
> {
> _
>
> --
> To unsubscribe from this list: send the line "unsubscribe kernel-janitors" in
> the body of a message to majordomo@vger.kernel.org
> More majordomo info at http://vger.kernel.org/majordomo-info.html
>
next prev parent reply other threads:[~2008-07-31 12:48 UTC|newest]
Thread overview: 5+ messages / expand[flat|nested] mbox.gz Atom feed top
2008-07-30 21:03 Alexander Beregalov
2008-07-31 1:14 ` M. Asselstine
2008-07-31 9:15 ` [Linux-fbdev-devel] " Andrew Morton
2008-07-31 12:47 ` M. Asselstine [this message]
2008-07-31 8:29 krzysztof.h1
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=919fe2b30807310547k4c5c28fh1ea524bcb320865d@mail.gmail.com \
--to=asselsm@mcmaster.ca \
--cc=a.beregalov@gmail.com \
--cc=adaplas@gmail.com \
--cc=akpm@linux-foundation.org \
--cc=kernel-janitors@vger.kernel.org \
--cc=linux-fbdev-devel@lists.sourceforge.net \
--cc=linux-kernel@vger.kernel.org \
--cc=syrjala@sci.fi \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox
all inboxes | Powered by JetHome®