From: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
To: Kathiravan T <quic_kathirav@quicinc.com>,
Andy Gross <agross@kernel.org>,
Bjorn Andersson <andersson@kernel.org>,
Konrad Dybcio <konrad.dybcio@linaro.org>,
Rob Herring <robh+dt@kernel.org>,
Krzysztof Kozlowski <krzysztof.kozlowski+dt@linaro.org>,
Conor Dooley <conor+dt@kernel.org>,
linux-arm-msm@vger.kernel.org, devicetree@vger.kernel.org,
linux-kernel@vger.kernel.org
Subject: Re: [PATCH RESEND 4/4] arm64: dts: qcom: ipq5332: add support for the RDP474 variant
Date: Thu, 1 Jun 2023 19:29:08 +0200 [thread overview]
Message-ID: <91c63634-eb39-fdca-2c76-6f8182c2d47c@linaro.org> (raw)
In-Reply-To: <20230601042054.29075-5-quic_kathirav@quicinc.com>
On 01/06/2023 06:20, Kathiravan T wrote:
> Add the initial device tree support for the Reference Design
> Platform(RDP) 474 based on IPQ5332 family of SoC. This patch carries
> the support for Console UART, eMMC, I2C and GPIO based buttons.
>
> Signed-off-by: Kathiravan T <quic_kathirav@quicinc.com>
> ---
> arch/arm64/boot/dts/qcom/Makefile | 1 +
> arch/arm64/boot/dts/qcom/ipq5332-rdp474.dts | 112 ++++++++++++++++++++
> 2 files changed, 113 insertions(+)
> create mode 100644 arch/arm64/boot/dts/qcom/ipq5332-rdp474.dts
>
> diff --git a/arch/arm64/boot/dts/qcom/Makefile b/arch/arm64/boot/dts/qcom/Makefile
> index 4f9e81253e18..0f8c763a9bd9 100644
> --- a/arch/arm64/boot/dts/qcom/Makefile
> +++ b/arch/arm64/boot/dts/qcom/Makefile
> @@ -7,6 +7,7 @@ dtb-$(CONFIG_ARCH_QCOM) += apq8096-ifc6640.dtb
> dtb-$(CONFIG_ARCH_QCOM) += ipq5332-mi01.2.dtb
> dtb-$(CONFIG_ARCH_QCOM) += ipq5332-rdp442.dtb
> dtb-$(CONFIG_ARCH_QCOM) += ipq5332-rdp468.dtb
> +dtb-$(CONFIG_ARCH_QCOM) += ipq5332-rdp474.dtb
> dtb-$(CONFIG_ARCH_QCOM) += ipq6018-cp01-c1.dtb
> dtb-$(CONFIG_ARCH_QCOM) += ipq8074-hk01.dtb
> dtb-$(CONFIG_ARCH_QCOM) += ipq8074-hk10-c1.dtb
> diff --git a/arch/arm64/boot/dts/qcom/ipq5332-rdp474.dts b/arch/arm64/boot/dts/qcom/ipq5332-rdp474.dts
> new file mode 100644
> index 000000000000..085729a0fdf1
> --- /dev/null
> +++ b/arch/arm64/boot/dts/qcom/ipq5332-rdp474.dts
> @@ -0,0 +1,112 @@
> +// SPDX-License-Identifier: BSD-3-Clause
> +/*
> + * IPQ5332 RDP474 board device tree source
> + *
> + * Copyright (c) 2022-2023 Qualcomm Innovation Center, Inc. All rights reserved.
> + */
> +
> +/dts-v1/;
> +
> +#include <dt-bindings/gpio/gpio.h>
> +#include <dt-bindings/input/input.h>
> +#include "ipq5332.dtsi"
> +
> +/ {
> + model = "Qualcomm Technologies, Inc. IPQ5332 MI01.9";
> + compatible = "qcom,ipq5332-ap-mi01.9", "qcom,ipq5332";
> +
> + aliases {
> + serial0 = &blsp1_uart0;
> + };
> +
> + chosen {
> + stdout-path = "serial0";
> + };
> +
> + gpio_keys {
No, srsly, so not only ignored the tags but also feedback?
Best regards,
Krzysztof
next prev parent reply other threads:[~2023-06-01 17:29 UTC|newest]
Thread overview: 14+ messages / expand[flat|nested] mbox.gz Atom feed top
2023-06-01 4:20 [PATCH RESEND 0/4] Add initial support for RDP474 of IPQ5332 family Kathiravan T
2023-06-01 4:20 ` [PATCH RESEND 1/4] dt-bindings: arm: qcom,ids: add SoC ID for IPQ5300 Kathiravan T
2023-06-01 17:28 ` Krzysztof Kozlowski
2023-06-02 7:04 ` Krzysztof Kozlowski
2023-06-01 4:20 ` [PATCH RESEND 2/4] soc: qcom: socinfo: Add Soc " Kathiravan T
2023-06-02 7:04 ` Krzysztof Kozlowski
2023-06-01 4:20 ` [PATCH RESEND 3/4] dt-bindings: arm: qcom: document MI01.9 board based on IPQ5332 family Kathiravan T
2023-06-01 17:28 ` Krzysztof Kozlowski
2023-06-02 7:04 ` Krzysztof Kozlowski
2023-06-01 4:20 ` [PATCH RESEND 4/4] arm64: dts: qcom: ipq5332: add support for the RDP474 variant Kathiravan T
2023-06-01 17:29 ` Krzysztof Kozlowski [this message]
2023-06-02 4:05 ` Kathiravan T
2023-06-02 7:04 ` Krzysztof Kozlowski
2023-06-02 8:22 ` Kathiravan T
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=91c63634-eb39-fdca-2c76-6f8182c2d47c@linaro.org \
--to=krzysztof.kozlowski@linaro.org \
--cc=agross@kernel.org \
--cc=andersson@kernel.org \
--cc=conor+dt@kernel.org \
--cc=devicetree@vger.kernel.org \
--cc=konrad.dybcio@linaro.org \
--cc=krzysztof.kozlowski+dt@linaro.org \
--cc=linux-arm-msm@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=quic_kathirav@quicinc.com \
--cc=robh+dt@kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox
all inboxes | Powered by JetHome®