mirror of https://lore.kernel.org/lkml/
 help / color / mirror / Atom feed
From: "Maíra Canal" <mcanal@igalia.com>
To: Cristian Ciocaltea <cristian.ciocaltea@collabora.com>,
	Maxime Ripard <mripard@kernel.org>,
	Dave Stevenson <dave.stevenson@raspberrypi.com>,
	Raspberry Pi Kernel Maintenance <kernel-list@raspberrypi.com>,
	Maarten Lankhorst <maarten.lankhorst@linux.intel.com>,
	Thomas Zimmermann <tzimmermann@suse.de>,
	David Airlie <airlied@gmail.com>, Simona Vetter <simona@ffwll.ch>
Cc: kernel@collabora.com, dri-devel@lists.freedesktop.org,
	linux-kernel@vger.kernel.org, Lucas Tanure <lucas.tanure@neat.no>
Subject: Re: [PATCH v4 2/9] drm/vc4: hdmi: Switch to drm_hdmi_mode_needs_scrambling()
Date: Tue, 10 Nov 2026 08:57:23 -0300	[thread overview]
Message-ID: <924b1db7-3498-4cc6-a57a-16b1c7c3bc73@igalia.com> (raw)
In-Reply-To: <20261110-vc4-common-scramb-v4-2-eaa141a0da0f@collabora.com>

On 09/11/26 21:13, Cristian Ciocaltea wrote:
> The VC4 HDMI driver has a local helper to check whether a mode requires
> scrambling.  It is equivalent to drm_hdmi_mode_needs_scrambling(), so
> use the common helper instead.
> 
> No functional change intended.
> 
> Acked-by: Maxime Ripard <mripard@kernel.org>
> Signed-off-by: Cristian Ciocaltea <cristian.ciocaltea@collabora.com>

Reviewed-by: Maíra Canal <mcanal@igalia.com>

Best regards,
- Maíra

> ---
>   drivers/gpu/drm/vc4/vc4_hdmi.c | 16 ++++------------
>   1 file changed, 4 insertions(+), 12 deletions(-)
> 
> diff --git a/drivers/gpu/drm/vc4/vc4_hdmi.c b/drivers/gpu/drm/vc4/vc4_hdmi.c
> index 22533f1c6207..d9383af60906 100644
> --- a/drivers/gpu/drm/vc4/vc4_hdmi.c
> +++ b/drivers/gpu/drm/vc4/vc4_hdmi.c
> @@ -129,15 +129,6 @@ static bool vc4_hdmi_supports_scrambling(struct vc4_hdmi *vc4_hdmi)
>   	return true;
>   }
>   
> -static bool vc4_hdmi_mode_needs_scrambling(const struct drm_display_mode *mode,
> -					   unsigned int bpc,
> -					   enum drm_output_color_format fmt)
> -{
> -	unsigned long long clock = drm_hdmi_compute_mode_clock(mode, bpc, fmt);
> -
> -	return clock > HDMI_1_3_TMDS_CHAR_RATE_MAX_HZ;
> -}
> -
>   static int vc4_hdmi_debugfs_regs(struct seq_file *m, void *unused)
>   {
>   	struct drm_debugfs_entry *entry = m->private;
> @@ -312,7 +303,7 @@ static int vc4_hdmi_reset_link(struct drm_connector *connector,
>   		return 0;
>   	}
>   
> -	scrambling_needed = vc4_hdmi_mode_needs_scrambling(&vc4_hdmi->saved_adjusted_mode,
> +	scrambling_needed = drm_hdmi_mode_needs_scrambling(&vc4_hdmi->saved_adjusted_mode,
>   							   vc4_hdmi->output_bpc,
>   							   vc4_hdmi->output_format);
>   	if (!scrambling_needed) {
> @@ -442,7 +433,8 @@ static int vc4_hdmi_connector_get_modes(struct drm_connector *connector)
>   		const struct drm_display_mode *mode;
>   
>   		list_for_each_entry(mode, &connector->probed_modes, head) {
> -			if (vc4_hdmi_mode_needs_scrambling(mode, 8, DRM_OUTPUT_COLOR_FORMAT_RGB444)) {
> +			if (drm_hdmi_mode_needs_scrambling(mode, 8,
> +							   DRM_OUTPUT_COLOR_FORMAT_RGB444)) {
>   				drm_warn_once(drm, "The core clock cannot reach frequencies high enough to support 4k @ 60Hz.");
>   				drm_warn_once(drm, "Please change your config.txt file to add hdmi_enable_4kp60.");
>   			}
> @@ -819,7 +811,7 @@ static void vc4_hdmi_enable_scrambling(struct drm_encoder *encoder)
>   	if (!vc4_hdmi_supports_scrambling(vc4_hdmi))
>   		return;
>   
> -	if (!vc4_hdmi_mode_needs_scrambling(mode,
> +	if (!drm_hdmi_mode_needs_scrambling(mode,
>   					    vc4_hdmi->output_bpc,
>   					    vc4_hdmi->output_format))
>   		return;
> 


  reply	other threads:[~2026-11-10 11:58 UTC|newest]

Thread overview: 15+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2026-11-10  0:13 [PATCH v4 0/9] drm/vc4: hdmi: Convert to common HDMI 2.0 scrambling infrastructure Cristian Ciocaltea
2026-11-10  0:13 ` [PATCH v4 1/9] drm/vc4: hdmi: Use common TMDS char rate constants Cristian Ciocaltea
2026-11-10  0:13 ` [PATCH v4 2/9] drm/vc4: hdmi: Switch to drm_hdmi_mode_needs_scrambling() Cristian Ciocaltea
2026-11-10 11:57   ` Maíra Canal [this message]
2026-11-10  0:13 ` [PATCH v4 3/9] drm/vc4: hdmi: Switch to .force_ctx() connector helper Cristian Ciocaltea
2026-11-10  0:13 ` [PATCH v4 4/9] drm/vc4: hdmi: Propagate -EDEADLK to the top level Cristian Ciocaltea
2026-11-10 12:08   ` Maíra Canal
2026-11-10  0:13 ` [PATCH v4 5/9] drm/vc4: hdmi: Convert to drmm_connector_hdmi_init() Cristian Ciocaltea
2026-11-10  0:13 ` [PATCH v4 6/9] drm/vc4: hdmi: Convert to common HDMI 2.0 scrambling infrastructure Cristian Ciocaltea
2026-11-10 12:11   ` Maíra Canal
2026-11-10 12:51     ` Cristian Ciocaltea
2026-11-10  0:13 ` [PATCH v4 7/9] drm/vc4: hdmi: Clamp CEC clock divider to its register field width Cristian Ciocaltea
2026-11-10  0:13 ` [PATCH v4 8/9] drm/vc4: hdmi: Bump BCM2835 max pixel clock to 165 MHz Cristian Ciocaltea
2026-11-10  0:13 ` [PATCH v4 9/9] drm/vc4: hdmi: Defer pixel clock validation to HDMI helpers Cristian Ciocaltea
2026-11-10 12:48 ` [PATCH v4 0/9] drm/vc4: hdmi: Convert to common HDMI 2.0 scrambling infrastructure Cristian Ciocaltea

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=924b1db7-3498-4cc6-a57a-16b1c7c3bc73@igalia.com \
    --to=mcanal@igalia.com \
    --cc=airlied@gmail.com \
    --cc=cristian.ciocaltea@collabora.com \
    --cc=dave.stevenson@raspberrypi.com \
    --cc=dri-devel@lists.freedesktop.org \
    --cc=kernel-list@raspberrypi.com \
    --cc=kernel@collabora.com \
    --cc=linux-kernel@vger.kernel.org \
    --cc=lucas.tanure@neat.no \
    --cc=maarten.lankhorst@linux.intel.com \
    --cc=mripard@kernel.org \
    --cc=simona@ffwll.ch \
    --cc=tzimmermann@suse.de \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox

all inboxes | Powered by JetHome®