Re: [PATCH 3/4] arm64: dts: qcom: sm7225-fairphone-fp4: Add camera fixed regulators

[Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>]

On 12/10/25 2:05 AM, Luca Weiss wrote:
> Add multiple fixed regulators that are found on the phone, which provide
> power to the cameras.
> 
> Signed-off-by: Luca Weiss <luca.weiss@fairphone.com>
> ---
>  arch/arm64/boot/dts/qcom/sm7225-fairphone-fp4.dts | 40 +++++++++++++++++++++++
>  1 file changed, 40 insertions(+)
> 
> diff --git a/arch/arm64/boot/dts/qcom/sm7225-fairphone-fp4.dts b/arch/arm64/boot/dts/qcom/sm7225-fairphone-fp4.dts
> index c2f856a56b2b..0cfb24e3941d 100644
> --- a/arch/arm64/boot/dts/qcom/sm7225-fairphone-fp4.dts
> +++ b/arch/arm64/boot/dts/qcom/sm7225-fairphone-fp4.dts
> @@ -246,6 +246,46 @@ active-config0 {
>  			};
>  		};
>  	};
> +
> +	vreg_32m_cam_dvdd_1p05: regulator-32m-cam-dvdd-1p05 {
> +		compatible = "regulator-fixed";
> +		regulator-name = "32M_CAM_DVDD_1P05";
> +		regulator-min-microvolt = <1050000>;
> +		regulator-max-microvolt = <1050000>;
> +		gpio = <&pm6150l_gpios 2 GPIO_ACTIVE_HIGH>;

It'd be useful to also explicitly describe the pinmux/cfg states
of the PMIC pins, since these can be a little surprising at boot

Konrad