From: Sibi Sankar <quic_sibis@quicinc.com>
To: Jimmy Chen <jinghung.chen3@hotmail.com>,
LKML <linux-kernel@vger.kernel.org>,
Andy Gross <agross@kernel.org>
Cc: Konrad Dybcio <konrad.dybcio@somainline.org>,
Rob Herring <robh+dt@kernel.org>,
Bjorn Andersson <bjorn.andersson@linaro.org>,
Douglas Anderson <dianders@chromium.org>,
Alan Huang <alan-huang@quanta.corp-partner.google.com>,
Krzysztof Kozlowski <krzysztof.kozlowski+dt@linaro.org>,
<devicetree@vger.kernel.org>, <linux-arm-msm@vger.kernel.org>
Subject: Re: [PATCH v8 3/3] arm64: dts: qcom: Add LTE SKUs for sc7280-villager family
Date: Wed, 24 Aug 2022 15:41:35 +0530 [thread overview]
Message-ID: <93bf8a59-34e3-e461-35c9-4f0f344dee32@quicinc.com> (raw)
In-Reply-To: <SG2PR03MB5006B0C3E57803E3B1E0EDBCCC949@SG2PR03MB5006.apcprd03.prod.outlook.com>
Hey Jimmy,
Thanks for the patch.
On 7/26/22 3:15 PM, Jimmy Chen wrote:
> This adds LTE skus for villager device tree files.
>
> Signed-off-by: Jimmy Chen <jinghung.chen3@hotmail.com>
> Reviewed-by: Douglas Anderson <dianders@chromium.org>
> ---
>
> (no changes since v6)
>
> Changes in v6:
> - Remove v5 accidentally added sc7280-herobrine-herobrine-r1-lte.dts
>
> Changes in v5:
> - Reorder '.dtb' in Makefile
> - Put the "interconnects" line back
>
> Changes in v4:
> - Reorder 'status' last
>
> arch/arm64/boot/dts/qcom/Makefile | 2 ++
> .../boot/dts/qcom/sc7280-chrome-common.dtsi | 11 -----------
> .../boot/dts/qcom/sc7280-herobrine-crd.dts | 1 +
> .../dts/qcom/sc7280-herobrine-herobrine-r1.dts | 1 +
> .../boot/dts/qcom/sc7280-herobrine-lte-sku.dtsi | 17 +++++++++++++++++
> .../qcom/sc7280-herobrine-villager-r0-lte.dts | 14 ++++++++++++++
> .../qcom/sc7280-herobrine-villager-r1-lte.dts | 14 ++++++++++++++
> arch/arm64/boot/dts/qcom/sc7280-idp.dts | 1 +
> 8 files changed, 50 insertions(+), 11 deletions(-)
> create mode 100644 arch/arm64/boot/dts/qcom/sc7280-herobrine-lte-sku.dtsi
> create mode 100644 arch/arm64/boot/dts/qcom/sc7280-herobrine-villager-r0-lte.dts
> create mode 100644 arch/arm64/boot/dts/qcom/sc7280-herobrine-villager-r1-lte.dts
>
> diff --git a/arch/arm64/boot/dts/qcom/Makefile b/arch/arm64/boot/dts/qcom/Makefile
> index 2c1605e00d349..24eacbf330880 100644
> --- a/arch/arm64/boot/dts/qcom/Makefile
> +++ b/arch/arm64/boot/dts/qcom/Makefile
> @@ -103,7 +103,9 @@ dtb-$(CONFIG_ARCH_QCOM) += sc7180-trogdor-r1-lte.dtb
> dtb-$(CONFIG_ARCH_QCOM) += sc7280-herobrine-crd.dtb
> dtb-$(CONFIG_ARCH_QCOM) += sc7280-herobrine-herobrine-r1.dtb
> dtb-$(CONFIG_ARCH_QCOM) += sc7280-herobrine-villager-r0.dtb
> +dtb-$(CONFIG_ARCH_QCOM) += sc7280-herobrine-villager-r0-lte.dtb
> dtb-$(CONFIG_ARCH_QCOM) += sc7280-herobrine-villager-r1.dtb
> +dtb-$(CONFIG_ARCH_QCOM) += sc7280-herobrine-villager-r1-lte.dtb
> dtb-$(CONFIG_ARCH_QCOM) += sc7280-idp.dtb
> dtb-$(CONFIG_ARCH_QCOM) += sc7280-idp2.dtb
> dtb-$(CONFIG_ARCH_QCOM) += sc7280-crd-r3.dtb
> diff --git a/arch/arm64/boot/dts/qcom/sc7280-chrome-common.dtsi b/arch/arm64/boot/dts/qcom/sc7280-chrome-common.dtsi
> index cfe2741456a1a..25f31c81b2b74 100644
> --- a/arch/arm64/boot/dts/qcom/sc7280-chrome-common.dtsi
> +++ b/arch/arm64/boot/dts/qcom/sc7280-chrome-common.dtsi
> @@ -83,17 +83,6 @@ spi_flash: flash@0 {
> };
> };
>
> -/* Modem setup is different on Chrome setups than typical Qualcomm setup */
> -&remoteproc_mpss {
> - status = "okay";
> - compatible = "qcom,sc7280-mss-pil";
> - iommus = <&apps_smmu 0x124 0x0>, <&apps_smmu 0x488 0x7>;
> - interconnects = <&mc_virt MASTER_LLCC 0 &mc_virt SLAVE_EBI1 0>;
> - memory-region = <&mba_mem>, <&mpss_mem>;
> - firmware-name = "qcom/sc7280-herobrine/modem/mba.mbn",
> - "qcom/sc7280-herobrine/modem/qdsp6sw.mbn";
> -};
> -
> &remoteproc_wpss {
> status = "okay";
> firmware-name = "ath11k/WCN6750/hw1.0/wpss.mdt";
> diff --git a/arch/arm64/boot/dts/qcom/sc7280-herobrine-crd.dts b/arch/arm64/boot/dts/qcom/sc7280-herobrine-crd.dts
> index e9ca6c5d24a16..921eccfec39ae 100644
> --- a/arch/arm64/boot/dts/qcom/sc7280-herobrine-crd.dts
> +++ b/arch/arm64/boot/dts/qcom/sc7280-herobrine-crd.dts
> @@ -9,6 +9,7 @@
>
> #include "sc7280-herobrine.dtsi"
> #include "sc7280-herobrine-audio-wcd9385.dtsi"
> +#include "sc7280-herobrine-lte-sku.dtsi"
>
> / {
> model = "Qualcomm Technologies, Inc. sc7280 CRD platform (rev5+)";
> diff --git a/arch/arm64/boot/dts/qcom/sc7280-herobrine-herobrine-r1.dts b/arch/arm64/boot/dts/qcom/sc7280-herobrine-herobrine-r1.dts
> index c1647a85a371a..c1a6719687252 100644
> --- a/arch/arm64/boot/dts/qcom/sc7280-herobrine-herobrine-r1.dts
> +++ b/arch/arm64/boot/dts/qcom/sc7280-herobrine-herobrine-r1.dts
> @@ -8,6 +8,7 @@
> /dts-v1/;
>
> #include "sc7280-herobrine.dtsi"
> +#include "sc7280-herobrine-lte-sku.dtsi"
>
> / {
> model = "Google Herobrine (rev1+)";
> diff --git a/arch/arm64/boot/dts/qcom/sc7280-herobrine-lte-sku.dtsi b/arch/arm64/boot/dts/qcom/sc7280-herobrine-lte-sku.dtsi
> new file mode 100644
> index 0000000000000..a92eeccd2b2a9
> --- /dev/null
> +++ b/arch/arm64/boot/dts/qcom/sc7280-herobrine-lte-sku.dtsi
> @@ -0,0 +1,17 @@
> +// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
> +/*
> + * Google Herobrine dts fragment for LTE SKUs
> + *
> + * Copyright 2022 Google LLC.
> + */
> +/* Modem setup is different on Chrome setups than typical Qualcomm setup */
> +
> +&remoteproc_mpss {
> + compatible = "qcom,sc7280-mss-pil";
> + iommus = <&apps_smmu 0x124 0x0>, <&apps_smmu 0x488 0x7>;
> + interconnects = <&mc_virt MASTER_LLCC 0 &mc_virt SLAVE_EBI1 0>;
> + memory-region = <&mba_mem>, <&mpss_mem>;
> + firmware-name = "qcom/sc7280-herobrine/modem/mba.mbn",
> + "qcom/sc7280-herobrine/modem/qdsp6sw.mbn";
> + status = "okay";
> +};
We shoud probably move the mpss_mem, mba_mem and rmtfs_mem here as
well, that way we save an additional ~255M.
-Sibi
> diff --git a/arch/arm64/boot/dts/qcom/sc7280-herobrine-villager-r0-lte.dts b/arch/arm64/boot/dts/qcom/sc7280-herobrine-villager-r0-lte.dts
> new file mode 100644
> index 0000000000000..672cb78e3088f
> --- /dev/null
> +++ b/arch/arm64/boot/dts/qcom/sc7280-herobrine-villager-r0-lte.dts
> @@ -0,0 +1,14 @@
> +// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
> +/*
> + * Google Villager board device tree source
> + *
> + * Copyright 2022 Google LLC.
> + */
> +
> +#include "sc7280-herobrine-villager-r0.dts"
> +#include "sc7280-herobrine-lte-sku.dtsi"
> +
> +/ {
> + model = "Google Villager (rev0) with LTE";
> + compatible = "google,villager-rev0-sku0", "qcom,sc7280";
> +};
> diff --git a/arch/arm64/boot/dts/qcom/sc7280-herobrine-villager-r1-lte.dts b/arch/arm64/boot/dts/qcom/sc7280-herobrine-villager-r1-lte.dts
> new file mode 100644
> index 0000000000000..2f05a19cc388e
> --- /dev/null
> +++ b/arch/arm64/boot/dts/qcom/sc7280-herobrine-villager-r1-lte.dts
> @@ -0,0 +1,14 @@
> +// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
> +/*
> + * Google Villager board device tree source
> + *
> + * Copyright 2022 Google LLC.
> + */
> +
> +#include "sc7280-herobrine-villager-r1.dts"
> +#include "sc7280-herobrine-lte-sku.dtsi"
> +
> +/ {
> + model = "Google Villager (rev1+) with LTE";
> + compatible = "google,villager-sku0", "qcom,sc7280";
> +};
> diff --git a/arch/arm64/boot/dts/qcom/sc7280-idp.dts b/arch/arm64/boot/dts/qcom/sc7280-idp.dts
> index 6d3ff80582ae9..fba7e938ce35a 100644
> --- a/arch/arm64/boot/dts/qcom/sc7280-idp.dts
> +++ b/arch/arm64/boot/dts/qcom/sc7280-idp.dts
> @@ -10,6 +10,7 @@
> #include <dt-bindings/iio/qcom,spmi-adc7-pmr735a.h>
> #include "sc7280-idp.dtsi"
> #include "pmr735a.dtsi"
> +#include "sc7280-herobrine-lte-sku.dtsi"
>
> / {
> model = "Qualcomm Technologies, Inc. sc7280 IDP SKU1 platform";
>
next prev parent reply other threads:[~2022-08-24 10:12 UTC|newest]
Thread overview: 7+ messages / expand[flat|nested] mbox.gz Atom feed top
[not found] <20220726094549.263899-1-jinghung.chen3@hotmail.com>
2022-07-26 9:45 ` [PATCH v8 1/3] dt-bindings: arm: qcom: document sc7280 and villager board Jimmy Chen
2022-09-13 15:04 ` Bjorn Andersson
2022-07-26 9:45 ` [PATCH v8 2/3] arm64: dts: qcom: sc7280: Add herobrine-villager-r1 Jimmy Chen
2022-07-26 9:45 ` [PATCH v8 3/3] arm64: dts: qcom: Add LTE SKUs for sc7280-villager family Jimmy Chen
2022-08-24 10:11 ` Sibi Sankar [this message]
2022-08-24 15:25 ` Doug Anderson
2022-08-25 5:13 ` Sibi Sankar
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=93bf8a59-34e3-e461-35c9-4f0f344dee32@quicinc.com \
--to=quic_sibis@quicinc.com \
--cc=agross@kernel.org \
--cc=alan-huang@quanta.corp-partner.google.com \
--cc=bjorn.andersson@linaro.org \
--cc=devicetree@vger.kernel.org \
--cc=dianders@chromium.org \
--cc=jinghung.chen3@hotmail.com \
--cc=konrad.dybcio@somainline.org \
--cc=krzysztof.kozlowski+dt@linaro.org \
--cc=linux-arm-msm@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=robh+dt@kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox
all inboxes | Powered by JetHome®