From: "Petr Vandrovec" <VANDROVE@vc.cvut.cz>
To: linux-kernel@vger.kernel.org
Subject: 2.5.50-bk: floppy: buffer layout error ...
Date: Tue, 3 Dec 2002 19:12:27 +0100 [thread overview]
Message-ID: <94A09B0451B@vcnet.vc.cvut.cz> (raw)
Hi,
is there some known problem with error handling in floppy driver?
It complains loudly that "buffer layer error at fs/buffer.c:2641"
and fs/buffer.c:2690. It happened during floppy write. After reformatting
floppy write succeeded without any complaints.
Thanks,
Petr Vandrovec
end_request: I/O error, dev fd0, sector 2872
Buffer I/O error on device fd(2,0), logical block 359
buffer layer error at fs/buffer.c:2641
Pass this trace through ksymoops for reporting
Call Trace:
[<c014cdf3>] __buffer_error+0x33/0x38
[<c0150171>] check_ttfb_buffer+0x41/0x48
[<c01501a7>] drop_buffers+0x2f/0xb0
[<c01502bc>] try_to_free_buffers+0x94/0x108
[<c01311cd>] __remove_from_page_cache+0x2d/0x68
[<c014e586>] try_to_release_page+0x42/0x48
[<c0139b4d>] invalidate_complete_page+0x25/0xa4
[<c0139eeb>] invalidate_inode_pages+0x6f/0xcc
[<c014d415>] invalidate_bdev+0x19/0x20
[<c01525b5>] kill_bdev+0xd/0x28
[<c0153a12>] blkdev_put+0xbe/0x208
[<c0153b6e>] blkdev_close+0x12/0x18
[<c014c9e4>] __fput+0x30/0x144
[<c014c9b0>] fput+0x14/0x18
[<c014b45d>] filp_close+0x101/0x10c
[<c014b4d6>] sys_close+0x6e/0x8c
[<c0108dc7>] syscall_call+0x7/0xb
buffer layer error at fs/buffer.c:2690
Pass this trace through ksymoops for reporting
Call Trace:
[<c014cdf3>] __buffer_error+0x33/0x38
[<c01501df>] drop_buffers+0x67/0xb0
[<c01502bc>] try_to_free_buffers+0x94/0x108
[<c01311cd>] __remove_from_page_cache+0x2d/0x68
[<c014e586>] try_to_release_page+0x42/0x48
[<c0139b4d>] invalidate_complete_page+0x25/0xa4
[<c0139eeb>] invalidate_inode_pages+0x6f/0xcc
[<c014d415>] invalidate_bdev+0x19/0x20
[<c01525b5>] kill_bdev+0xd/0x28
[<c0153a12>] blkdev_put+0xbe/0x208
[<c0153b6e>] blkdev_close+0x12/0x18
[<c014c9e4>] __fput+0x30/0x144
[<c014c9b0>] fput+0x14/0x18
[<c014b45d>] filp_close+0x101/0x10c
[<c014b4d6>] sys_close+0x6e/0x8c
[<c0108dc7>] syscall_call+0x7/0xb
buffer layer error at fs/buffer.c:2641
Pass this trace through ksymoops for reporting
Call Trace:
[<c014cdf3>] __buffer_error+0x33/0x38
[<c0150171>] check_ttfb_buffer+0x41/0x48
[<c01501a7>] drop_buffers+0x2f/0xb0
[<c01502bc>] try_to_free_buffers+0x94/0x108
[<c01311cd>] __remove_from_page_cache+0x2d/0x68
[<c014e586>] try_to_release_page+0x42/0x48
[<c0139b4d>] invalidate_complete_page+0x25/0xa4
[<c0139eeb>] invalidate_inode_pages+0x6f/0xcc
[<c014d415>] invalidate_bdev+0x19/0x20
[<c01525b5>] kill_bdev+0xd/0x28
[<c0153a12>] blkdev_put+0xbe/0x208
[<c0153b6e>] blkdev_close+0x12/0x18
[<c014c9e4>] __fput+0x30/0x144
[<c014c9b0>] fput+0x14/0x18
[<c014b45d>] filp_close+0x101/0x10c
[<c014b4d6>] sys_close+0x6e/0x8c
[<c0108dc7>] syscall_call+0x7/0xb
buffer layer error at fs/buffer.c:2690
Pass this trace through ksymoops for reporting
Call Trace:
[<c014cdf3>] __buffer_error+0x33/0x38
[<c01501df>] drop_buffers+0x67/0xb0
[<c01502bc>] try_to_free_buffers+0x94/0x108
[<c01311cd>] __remove_from_page_cache+0x2d/0x68
[<c014e586>] try_to_release_page+0x42/0x48
[<c0139b4d>] invalidate_complete_page+0x25/0xa4
[<c0139eeb>] invalidate_inode_pages+0x6f/0xcc
[<c014d415>] invalidate_bdev+0x19/0x20
[<c01525b5>] kill_bdev+0xd/0x28
[<c0153a12>] blkdev_put+0xbe/0x208
[<c0153b6e>] blkdev_close+0x12/0x18
[<c014c9e4>] __fput+0x30/0x144
[<c014c9b0>] fput+0x14/0x18
[<c014b45d>] filp_close+0x101/0x10c
[<c014b4d6>] sys_close+0x6e/0x8c
[<c0108dc7>] syscall_call+0x7/0xb
buffer layer error at fs/buffer.c:2641
Pass this trace through ksymoops for reporting
Call Trace:
[<c014cdf3>] __buffer_error+0x33/0x38
[<c0150171>] check_ttfb_buffer+0x41/0x48
[<c01501a7>] drop_buffers+0x2f/0xb0
[<c01502bc>] try_to_free_buffers+0x94/0x108
[<c01311cd>] __remove_from_page_cache+0x2d/0x68
[<c014e586>] try_to_release_page+0x42/0x48
[<c0139b4d>] invalidate_complete_page+0x25/0xa4
[<c0139eeb>] invalidate_inode_pages+0x6f/0xcc
[<c014d415>] invalidate_bdev+0x19/0x20
[<c01525b5>] kill_bdev+0xd/0x28
[<c0153a12>] blkdev_put+0xbe/0x208
[<c0153b6e>] blkdev_close+0x12/0x18
[<c014c9e4>] __fput+0x30/0x144
[<c014c9b0>] fput+0x14/0x18
[<c014b45d>] filp_close+0x101/0x10c
[<c014b4d6>] sys_close+0x6e/0x8c
[<c0108dc7>] syscall_call+0x7/0xb
buffer layer error at fs/buffer.c:2690
Pass this trace through ksymoops for reporting
Call Trace:
[<c014cdf3>] __buffer_error+0x33/0x38
[<c01501df>] drop_buffers+0x67/0xb0
[<c01502bc>] try_to_free_buffers+0x94/0x108
[<c01311cd>] __remove_from_page_cache+0x2d/0x68
[<c014e586>] try_to_release_page+0x42/0x48
[<c0139b4d>] invalidate_complete_page+0x25/0xa4
[<c0139eeb>] invalidate_inode_pages+0x6f/0xcc
[<c014d415>] invalidate_bdev+0x19/0x20
[<c01525b5>] kill_bdev+0xd/0x28
[<c0153a12>] blkdev_put+0xbe/0x208
[<c0153b6e>] blkdev_close+0x12/0x18
[<c014c9e4>] __fput+0x30/0x144
[<c014c9b0>] fput+0x14/0x18
[<c014b45d>] filp_close+0x101/0x10c
[<c014b4d6>] sys_close+0x6e/0x8c
[<c0108dc7>] syscall_call+0x7/0xb
buffer layer error at fs/buffer.c:2641
Pass this trace through ksymoops for reporting
Call Trace:
[<c014cdf3>] __buffer_error+0x33/0x38
[<c0150171>] check_ttfb_buffer+0x41/0x48
[<c01501a7>] drop_buffers+0x2f/0xb0
[<c01502bc>] try_to_free_buffers+0x94/0x108
[<c01311cd>] __remove_from_page_cache+0x2d/0x68
[<c014e586>] try_to_release_page+0x42/0x48
[<c0139b4d>] invalidate_complete_page+0x25/0xa4
[<c0139eeb>] invalidate_inode_pages+0x6f/0xcc
[<c014d415>] invalidate_bdev+0x19/0x20
[<c01525b5>] kill_bdev+0xd/0x28
[<c0153a12>] blkdev_put+0xbe/0x208
[<c0153b6e>] blkdev_close+0x12/0x18
[<c014c9e4>] __fput+0x30/0x144
[<c014c9b0>] fput+0x14/0x18
[<c014b45d>] filp_close+0x101/0x10c
[<c014b4d6>] sys_close+0x6e/0x8c
[<c0108dc7>] syscall_call+0x7/0xb
buffer layer error at fs/buffer.c:2690
Pass this trace through ksymoops for reporting
Call Trace:
[<c014cdf3>] __buffer_error+0x33/0x38
[<c01501df>] drop_buffers+0x67/0xb0
[<c01502bc>] try_to_free_buffers+0x94/0x108
[<c01311cd>] __remove_from_page_cache+0x2d/0x68
[<c014e586>] try_to_release_page+0x42/0x48
[<c0139b4d>] invalidate_complete_page+0x25/0xa4
[<c0139eeb>] invalidate_inode_pages+0x6f/0xcc
[<c014d415>] invalidate_bdev+0x19/0x20
[<c01525b5>] kill_bdev+0xd/0x28
[<c0153a12>] blkdev_put+0xbe/0x208
[<c0153b6e>] blkdev_close+0x12/0x18
[<c014c9e4>] __fput+0x30/0x144
[<c014c9b0>] fput+0x14/0x18
[<c014b45d>] filp_close+0x101/0x10c
[<c014b4d6>] sys_close+0x6e/0x8c
[<c0108dc7>] syscall_call+0x7/0xb
buffer layer error at fs/buffer.c:2641
Pass this trace through ksymoops for reporting
Call Trace:
[<c014cdf3>] __buffer_error+0x33/0x38
[<c0150171>] check_ttfb_buffer+0x41/0x48
[<c01501a7>] drop_buffers+0x2f/0xb0
[<c01502bc>] try_to_free_buffers+0x94/0x108
[<c01311cd>] __remove_from_page_cache+0x2d/0x68
[<c014e586>] try_to_release_page+0x42/0x48
[<c0139b4d>] invalidate_complete_page+0x25/0xa4
[<c0139eeb>] invalidate_inode_pages+0x6f/0xcc
[<c014d415>] invalidate_bdev+0x19/0x20
[<c01525b5>] kill_bdev+0xd/0x28
[<c0153a12>] blkdev_put+0xbe/0x208
[<c0153b6e>] blkdev_close+0x12/0x18
[<c014c9e4>] __fput+0x30/0x144
[<c014c9b0>] fput+0x14/0x18
[<c014b45d>] filp_close+0x101/0x10c
[<c014b4d6>] sys_close+0x6e/0x8c
[<c0108dc7>] syscall_call+0x7/0xb
buffer layer error at fs/buffer.c:2690
Pass this trace through ksymoops for reporting
Call Trace:
[<c014cdf3>] __buffer_error+0x33/0x38
[<c01501df>] drop_buffers+0x67/0xb0
[<c01502bc>] try_to_free_buffers+0x94/0x108
[<c01311cd>] __remove_from_page_cache+0x2d/0x68
[<c014e586>] try_to_release_page+0x42/0x48
[<c0139b4d>] invalidate_complete_page+0x25/0xa4
[<c0139eeb>] invalidate_inode_pages+0x6f/0xcc
[<c014d415>] invalidate_bdev+0x19/0x20
[<c01525b5>] kill_bdev+0xd/0x28
[<c0153a12>] blkdev_put+0xbe/0x208
[<c0153b6e>] blkdev_close+0x12/0x18
[<c014c9e4>] __fput+0x30/0x144
[<c014c9b0>] fput+0x14/0x18
[<c014b45d>] filp_close+0x101/0x10c
[<c014b4d6>] sys_close+0x6e/0x8c
[<c0108dc7>] syscall_call+0x7/0xb
buffer layer error at fs/buffer.c:2641
Pass this trace through ksymoops for reporting
Call Trace:
[<c014cdf3>] __buffer_error+0x33/0x38
[<c0150171>] check_ttfb_buffer+0x41/0x48
[<c01501a7>] drop_buffers+0x2f/0xb0
[<c01502bc>] try_to_free_buffers+0x94/0x108
[<c01311cd>] __remove_from_page_cache+0x2d/0x68
[<c014e586>] try_to_release_page+0x42/0x48
[<c0139b4d>] invalidate_complete_page+0x25/0xa4
[<c0139eeb>] invalidate_inode_pages+0x6f/0xcc
[<c014d415>] invalidate_bdev+0x19/0x20
[<c01525b5>] kill_bdev+0xd/0x28
[<c0153a12>] blkdev_put+0xbe/0x208
[<c0153b6e>] blkdev_close+0x12/0x18
[<c014c9e4>] __fput+0x30/0x144
[<c014c9b0>] fput+0x14/0x18
[<c014b45d>] filp_close+0x101/0x10c
[<c014b4d6>] sys_close+0x6e/0x8c
[<c0108dc7>] syscall_call+0x7/0xb
reply other threads:[~2002-12-03 18:05 UTC|newest]
Thread overview: [no followups] expand[flat|nested] mbox.gz Atom feed
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=94A09B0451B@vcnet.vc.cvut.cz \
--to=vandrove@vc.cvut.cz \
--cc=linux-kernel@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox
Powered by JetHome