From: Kumar Gala <galak@kernel.crashing.org>
To: Jeff Garzik <jgarzik@pobox.com>
Cc: linux-ide@vger.kernel.org,
Linux Kernel list <linux-kernel@vger.kernel.org>,
linuxppc-dev list <linuxppc-dev@ozlabs.org>
Subject: libata badness
Date: Thu, 31 Jul 2008 13:53:45 -0500 [thread overview]
Message-ID: <95646AC3-5385-4F59-8EBA-20F811168A87@kernel.crashing.org> (raw)
I'm getting the following badness with top of tree on a embedded
PowerPC w/a ULI 1575 bridge (M5229 IDE):
02:1f.0 IDE interface: Acer Laboratories Inc. [ALi] M5229 IDE (rev c8)
If you need more info let me know.
- k
ahci 0000:02:1f.1: AHCI 0001.0000 32 slots 4 ports 3 Gbps 0xf impl
SATA mode
ahci 0000:02:1f.1: flags: ncq sntf ilck pm led clo pmp pio slum part
------------[ cut here ]------------
Badness at c021e700 [verbose debug info unavailable]
NIP: c021e700 LR: c021e6e8 CTR: c022ce90
REGS: ef82bca0 TRAP: 0700 Not tainted (2.6.27-rc1-00495-g33bd9fe-
dirty)
MSR: 00029032 <EE,ME,IR,DR> CR: 22044022 XER: 20000000
TASK = ef830000[1] 'swapper' THREAD: ef82a000 CPU: 1
GPR00: 00000001 ef82bd50 ef830000 00000000 00009032 00000000 ef0b64fc
00000000
GPR08: ef937c10 c022f93f efbfc8e0 ef900b60 22044028 fffdd3ff 0ffe8700
c044c17c
GPR16: c04d52ec ef82f458 ef82f4f4 ef82f4f4 c044c234 c044c5d8 c044c5d8
c044c220
GPR24: c044c218 c04d52f0 00000080 c022f940 00000000 c044c244 efbec490
00000000
NIP [c021e700] ata_host_activate+0x40/0x10c
LR [c021e6e8] ata_host_activate+0x28/0x10c
Call Trace:
[ef82bd50] [c021e6e8] ata_host_activate+0x28/0x10c (unreliable)
[ef82bd80] [c022f48c] ahci_init_one+0x8b4/0xd68
[ef82be30] [c01b69c0] pci_device_probe+0x84/0xa8
[ef82be50] [c01e5438] driver_probe_device+0xb4/0x1e8
[ef82be70] [c01e55f0] __driver_attach+0x84/0x88
[ef82be90] [c01e4ba0] bus_for_each_dev+0x5c/0xa4
[ef82bec0] [c01e5254] driver_attach+0x24/0x34
[ef82bed0] [c01e44b8] bus_add_driver+0x1d8/0x24c
[ef82bef0] [c01e5810] driver_register+0x70/0x160
[ef82bf10] [c01b6c54] __pci_register_driver+0x64/0xc4
[ef82bf30] [c04aaa60] ahci_init+0x28/0x38
[ef82bf40] [c048717c] do_one_initcall+0x38/0x1ac
[ef82bfb0] [c04874e0] kernel_init+0x1f0/0x1fc
[ef82bff0] [c0013b04] kernel_thread+0x44/0x60
Instruction dump:
7cbb2b78 90010034 7cda3378 7cf93b78 7c7e1b78 4bff9dbd 7c7f1b79 408200c8
2f9c0000 409e002c 313bffff 7c09d910 <0f000000> 80010034 7fc3f378
7f24cb78
scsi0 : ahci
scsi1 : ahci
scsi2 : ahci
scsi3 : ahci
ata1: SATA max UDMA/133 abar m1024@0x80006000 port 0x80006100
ata2: SATA max UDMA/133 abar m1024@0x80006000 port 0x80006180
ata3: SATA max UDMA/133 abar m1024@0x80006000 port 0x80006200
ata4: SATA max UDMA/133 abar m1024@0x80006000 port 0x80006280
ata1: SATA link down (SStatus 0 SControl 300)
ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
ata2.00: qc timeout (cmd 0xec)
ata2.00: failed to IDENTIFY (I/O error, err_mask=0x4)
ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
ata2.00: qc timeout (cmd 0xec)
ata2.00: failed to IDENTIFY (I/O error, err_mask=0x4)
ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
ata2.00: qc timeout (cmd 0xec)
ata2.00: failed to IDENTIFY (I/O error, err_mask=0x4)
ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
ata3: SATA link down (SStatus 0 SControl 300)
ata4: SATA link down (SStatus 0 SControl 300)
scsi4 : pata_ali
scsi5 : pata_ali
ata5: PATA max UDMA/133 cmd 0x1200 ctl 0x1208 bmdma 0x1220
ata6: PATA max UDMA/133 cmd 0x1210 ctl 0x1218 bmdma 0x1228
ata5.00: ATAPI: TSSTcorp CDW/DVD SH-M522C, TS06, max UDMA/33
ata5.00: WARNING: ATAPI DMA disabled for reliablity issues. It can be
enabled
ata5.00: WARNING: via pata_ali.atapi_dma modparam or corresponding
sysfs node.
ata5.00: configured for UDMA/33
ata5.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6 frozen
ata5.00: cmd a0/00:00:00:24:00/00:00:00:00:00/a0 tag 0 pio 36 in
cdb 12 00 00 00 24 00 00 00 00 00 00 00 00 00 00 00
res 40/00:00:00:00:00/00:00:00:00:00/00 Emask 0x4 (timeout)
ata5.00: status: { DRDY }
ata5: soft resetting link
ata5.00: configured for UDMA/33
ata5: EH complete
ata5.00: limiting speed to UDMA/25:PIO4
ata5.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6 frozen
ata5.00: cmd a0/00:00:00:24:00/00:00:00:00:00/a0 tag 0 pio 36 in
cdb 12 00 00 00 24 00 00 00 00 00 00 00 00 00 00 00
res 40/00:00:00:00:00/00:00:00:00:00/00 Emask 0x4 (timeout)
ata5.00: status: { DRDY }
ata5: soft resetting link
ata5.00: configured for UDMA/25
ata5: EH complete
ata5.00: limiting speed to PIO4
ata5.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6 frozen
ata5.00: cmd a0/00:00:00:24:00/00:00:00:00:00/a0 tag 0 pio 36 in
cdb 12 00 00 00 24 00 00 00 00 00 00 00 00 00 00 00
res 40/00:00:00:00:00/00:00:00:00:00/00 Emask 0x4 (timeout)
ata5.00: status: { DRDY }
ata5: soft resetting link
ata5.00: configured for PIO4
ata5: EH complete
ata5.00: limiting speed to PIO3
ata5.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6 frozen
ata5.00: cmd a0/00:00:00:24:00/00:00:00:00:00/a0 tag 0 pio 36 in
cdb 12 00 00 00 24 00 00 00 00 00 00 00 00 00 00 00
res 40/00:00:00:00:00/00:00:00:00:00/00 Emask 0x4 (timeout)
ata5.00: status: { DRDY }
ata5: soft resetting link
ata5.00: configured for PIO3
ata5: EH complete
ata5.00: limiting speed to PIO0
ata5.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6 frozen
ata5.00: cmd a0/00:00:00:24:00/00:00:00:00:00/a0 tag 0 pio 36 in
cdb 12 00 00 00 24 00 00 00 00 00 00 00 00 00 00 00
res 40/00:00:00:00:00/00:00:00:00:00/00 Emask 0x4 (timeout)
ata5.00: status: { DRDY }
ata5: soft resetting link
ata5.00: configured for PIO0
ata5: EH complete
ata5.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6 frozen
ata5.00: cmd a0/00:00:00:24:00/00:00:00:00:00/a0 tag 0 pio 36 in
cdb 12 00 00 00 24 00 00 00 00 00 00 00 00 00 00 00
res 40/00:00:00:00:00/00:00:00:00:00/00 Emask 0x4 (timeout)
ata5.00: status: { DRDY }
ata5: soft resetting link
ata5.00: configured for PIO0
ata5: EH complete
ata5.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6 frozen
ata5.00: cmd a0/00:00:00:24:00/00:00:00:00:00/a0 tag 0 pio 36 in
cdb 12 00 00 00 24 00 00 00 00 00 00 00 00 00 00 00
res 40/00:00:00:00:00/00:00:00:00:00/00 Emask 0x4 (timeout)
ata5.00: status: { DRDY }
ata5: soft resetting link
ata5.00: configured for PIO0
ata5: EH complete
ata5.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6 frozen
ata5.00: cmd a0/00:00:00:24:00/00:00:00:00:00/a0 tag 0 pio 36 in
cdb 12 00 00 00 24 00 00 00 00 00 00 00 00 00 00 00
res 40/00:00:00:00:00/00:00:00:00:00/00 Emask 0x4 (timeout)
ata5.00: status: { DRDY }
ata5: soft resetting link
ata5.00: configured for PIO0
ata5: EH complete
ata5.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6 frozen
ata5.00: cmd a0/00:00:00:24:00/00:00:00:00:00/a0 tag 0 pio 36 in
cdb 12 00 00 00 24 00 00 00 00 00 00 00 00 00 00 00
res 40/00:00:00:00:00/00:00:00:00:00/00 Emask 0x4 (timeout)
ata5.00: status: { DRDY }
ata5: soft resetting link
ata5.00: configured for PIO0
ata5: EH complete
ata5.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6 frozen
ata5.00: cmd a0/00:00:00:24:00/00:00:00:00:00/a0 tag 0 pio 36 in
cdb 12 00 00 00 24 00 00 00 00 00 00 00 00 00 00 00
res 40/00:00:00:00:00/00:00:00:00:00/00 Emask 0x4 (timeout)
ata5.00: status: { DRDY }
ata5: soft resetting link
ata5.00: configured for PIO0
ata5: EH complete
ata5.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6 frozen
ata5.00: cmd a0/00:00:00:24:00/00:00:00:00:00/a0 tag 0 pio 36 in
cdb 12 00 00 00 24 00 00 00 00 00 00 00 00 00 00 00
res 40/00:00:00:00:00/00:00:00:00:00/00 Emask 0x4 (timeout)
ata5.00: status: { DRDY }
ata5: soft resetting link
ata5.00: configured for PIO0
ata5: EH complete
ata5.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6 frozen
ata5.00: cmd a0/00:00:00:24:00/00:00:00:00:00/a0 tag 0 pio 36 in
cdb 12 00 00 00 24 00 00 00 00 00 00 00 00 00 00 00
res 40/00:00:00:00:00/00:00:00:00:00/00 Emask 0x4 (timeout)
ata5.00: status: { DRDY }
ata5: soft resetting link
ata5.00: configured for PIO0
ata5: EH complete
ata5.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6 frozen
ata5.00: cmd a0/00:00:00:24:00/00:00:00:00:00/a0 tag 0 pio 36 in
cdb 12 00 00 00 24 00 00 00 00 00 00 00 00 00 00 00
res 40/00:00:00:00:00/00:00:00:00:00/00 Emask 0x4 (timeout)
ata5.00: status: { DRDY }
ata5: soft resetting link
ata5.00: configured for PIO0
ata5: EH complete
ata5.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6 frozen
ata5.00: cmd a0/00:00:00:24:00/00:00:00:00:00/a0 tag 0 pio 36 in
cdb 12 00 00 00 24 00 00 00 00 00 00 00 00 00 00 00
res 40/00:00:00:00:00/00:00:00:00:00/00 Emask 0x4 (timeout)
ata5.00: status: { DRDY }
ata5: soft resetting link
ata5.00: configured for PIO0
ata5: EH complete
ata5.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6 frozen
ata5.00: cmd a0/00:00:00:24:00/00:00:00:00:00/a0 tag 0 pio 36 in
cdb 12 00 00 00 24 00 00 00 00 00 00 00 00 00 00 00
res 40/00:00:00:00:00/00:00:00:00:00/00 Emask 0x4 (timeout)
ata5.00: status: { DRDY }
ata5: soft resetting link
ata5.00: configured for PIO0
ata5: EH complete
ata5.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6 frozen
ata5.00: cmd a0/00:00:00:24:00/00:00:00:00:00/a0 tag 0 pio 36 in
cdb 12 00 00 00 24 00 00 00 00 00 00 00 00 00 00 00
res 40/00:00:00:00:00/00:00:00:00:00/00 Emask 0x4 (timeout)
ata5.00: status: { DRDY }
ata5: soft resetting link
ata5.00: configured for PIO0
ata5: EH complete
ata5.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6 frozen
ata5.00: cmd a0/00:00:00:24:00/00:00:00:00:00/a0 tag 0 pio 36 in
cdb 12 00 00 00 24 00 00 00 00 00 00 00 00 00 00 00
res 40/00:00:00:00:00/00:00:00:00:00/00 Emask 0x4 (timeout)
ata5.00: status: { DRDY }
ata5: soft resetting link
ata5.00: configured for PIO0
ata5: EH complete
ata5.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6 frozen
ata5.00: cmd a0/00:00:00:24:00/00:00:00:00:00/a0 tag 0 pio 36 in
cdb 12 00 00 00 24 00 00 00 00 00 00 00 00 00 00 00
res 40/00:00:00:00:00/00:00:00:00:00/00 Emask 0x4 (timeout)
ata5.00: status: { DRDY }
ata5: soft resetting link
ata5.00: configured for PIO0
ata5: EH complete
ata5.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6 frozen
ata5.00: cmd a0/00:00:00:24:00/00:00:00:00:00/a0 tag 0 pio 36 in
cdb 12 00 00 00 24 00 00 00 00 00 00 00 00 00 00 00
res 40/00:00:00:00:00/00:00:00:00:00/00 Emask 0x4 (timeout)
ata5.00: status: { DRDY }
ata5: soft resetting link
ata5.00: configured for PIO0
ata5: EH complete
ata5.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6 frozen
ata5.00: cmd a0/00:00:00:24:00/00:00:00:00:00/a0 tag 0 pio 36 in
cdb 12 00 00 00 24 00 00 00 00 00 00 00 00 00 00 00
res 40/00:00:00:00:00/00:00:00:00:00/00 Emask 0x4 (timeout)
ata5.00: status: { DRDY }
ata5: soft resetting link
ata5.00: configured for PIO0
ata5: EH complete
ata5.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6 frozen
ata5.00: cmd a0/00:00:00:24:00/00:00:00:00:00/a0 tag 0 pio 36 in
cdb 12 00 00 00 24 00 00 00 00 00 00 00 00 00 00 00
res 40/00:00:00:00:00/00:00:00:00:00/00 Emask 0x4 (timeout)
ata5.00: status: { DRDY }
ata5: soft resetting link
ata5.00: configured for PIO0
ata5: EH complete
ata5.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6 frozen
ata5.00: cmd a0/00:00:00:24:00/00:00:00:00:00/a0 tag 0 pio 36 in
cdb 12 00 00 00 24 00 00 00 00 00 00 00 00 00 00 00
res 40/00:00:00:00:00/00:00:00:00:00/00 Emask 0x4 (timeout)
ata5.00: status: { DRDY }
ata5: soft resetting link
ata5.00: configured for PIO0
ata5: EH complete
ata5.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6 frozen
ata5.00: cmd a0/00:00:00:24:00/00:00:00:00:00/a0 tag 0 pio 36 in
cdb 12 00 00 00 24 00 00 00 00 00 00 00 00 00 00 00
res 40/00:00:00:00:00/00:00:00:00:00/00 Emask 0x4 (timeout)
ata5.00: status: { DRDY }
ata5: soft resetting link
ata5.00: configured for PIO0
ata5: EH complete
ata5.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6 frozen
ata5.00: cmd a0/00:00:00:24:00/00:00:00:00:00/a0 tag 0 pio 36 in
cdb 12 00 00 00 24 00 00 00 00 00 00 00 00 00 00 00
res 40/00:00:00:00:00/00:00:00:00:00/00 Emask 0x4 (timeout)
ata5.00: status: { DRDY }
ata5: soft resetting link
ata5.00: configured for PIO0
ata5: EH complete
ata5: WARNING: synchronous SCSI scan failed without making any progress,
switching to async
next reply other threads:[~2008-07-31 18:54 UTC|newest]
Thread overview: 25+ messages / expand[flat|nested] mbox.gz Atom feed top
2008-07-31 18:53 Kumar Gala [this message]
2008-07-31 19:02 ` Ben Dooks
2008-07-31 20:24 ` Kumar Gala
2008-07-31 20:37 ` Scott Wood
2008-07-31 21:04 ` Anton Vorontsov
2008-07-31 21:58 ` Kumar Gala
2008-08-01 10:43 ` Ben Dooks
2008-08-01 12:46 ` Kumar Gala
-- strict thread matches above, loose matches on Subject: below --
2004-10-04 12:12 William Knop
2004-10-04 13:59 ` Jon Lewis
2004-10-04 15:50 ` William Knop
2004-10-04 16:06 ` Mark Lord
2004-10-04 16:24 ` William Knop
2004-10-04 16:30 ` Jeff Garzik
2004-10-04 16:09 ` Jon Lewis
2004-10-04 16:34 ` William Knop
2004-10-04 16:30 ` Jeff Garzik
2004-10-04 16:55 ` William Knop
2004-10-04 17:42 ` William Knop
2004-10-04 17:50 ` Jim Paris
2004-10-04 18:03 ` William Knop
2004-10-04 18:01 ` Jeff Garzik
2004-10-04 22:47 ` Neil Brown
2004-10-05 3:11 ` William Knop
2004-10-05 4:49 ` Brad Campbell
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=95646AC3-5385-4F59-8EBA-20F811168A87@kernel.crashing.org \
--to=galak@kernel.crashing.org \
--cc=jgarzik@pobox.com \
--cc=linux-ide@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linuxppc-dev@ozlabs.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox
all inboxes | Powered by JetHome®