From: "Nícolas F. R. A. Prado" <nfraprado@collabora.com>
To: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Cc: Matthias Brugger <matthias.bgg@gmail.com>,
kernel@collabora.com, linux-kernel@vger.kernel.org,
linux-arm-kernel@lists.infradead.org,
linux-mediatek@lists.infradead.org
Subject: Re: [PATCH] soc: mediatek: cmdq: Don't log an error when gce-client-reg is not found
Date: Wed, 28 Feb 2024 09:44:04 -0500 [thread overview]
Message-ID: <957b44d3-ef48-4682-8db5-3261e582ac8f@notapiano> (raw)
In-Reply-To: <6389f1e3-57b2-453a-af6f-6bc7f725ad31@collabora.com>
On Wed, Feb 28, 2024 at 10:41:15AM +0100, AngeloGioacchino Del Regno wrote:
> Il 26/02/24 22:31, Nícolas F. R. A. Prado ha scritto:
> > Most of the callers to this function do not require CMDQ support, it is
> > optional, so the missing property shouldn't cause an error message.
> > Furthermore, the callers that do require CMDQ support already log at the
> > error level when an error is returned.
> >
> > Change the log message in this helper to be printed at the debug level
> > instead.
>
> CMDQ is optional, yes. At least, for some devices it is.
>
> Full story, though, wants that if you use the CPU for register manipulation
> instead of programming the GCE (even with threading, fantastic!) you will
> trigger various performance issues.
>
> In the end, you *don't want* to use the CPU if GCE is available!
>
> The reasons why the CMDQ/GCE is optional are:
> - You can check register-by-register r/w for debugging scenarios by using
> the CPU to manipulate them instead of having something magically doing
> that for you at a certain (pre-set, yes, but still!) point;
> - Not all SoCs have the same amount of GCE threads and channels, some may
> support writing to IP block X through the GCE, some may not, but both
> may support writing for IP block Y through this mailbox;
> - MediaTek chose to support both ways, enabling means to debug stuff upstream,
> the other choice would've been to never support CPU register R/W on some IPs
>
> ... and btw - about the last part: Kudos, MediaTek.
Thank you for all the insight! :)
>
> Now, I also get why you're raising this, but we have to find an agreement here
> on a different way to proceed that satisfies all of us.
>
> First of all..
>
> Which device on which SoC is missing the GCE client register DT property?
> Do said SoC really not have a GCE client register for that device?
This is what I see:
On mt8192-asurada-spherion:
mediatek-mutex 14001000.mutex: error -2 can't parse gce-client-reg property (0)
On mt8195-cherry-tomato:
mtk-mmsys 14000000.syscon: error -2 can't parse gce-client-reg property (0)
mtk-mmsys 14f00000.syscon: error -2 can't parse gce-client-reg property (0)
mediatek-mutex 1c016000.mutex: error -2 can't parse gce-client-reg property (0)
mtk-mmsys 1c01a000.syscon: error -2 can't parse gce-client-reg property (0)
mediatek-mutex 1c101000.mutex: error -2 can't parse gce-client-reg property (0)
So yes, there are a few missing. I will send patches adding them so we can get
the best performance possible upstream.
>
> Is any upstream supported SoC really lacking a GCE register for the upstream
> supported IPs?
>
> I'm not sure.... :-)
>
> P.S.: I guess that the alternative (that I somewhat dislike, and you can probably
> understand why after reading the reasons above) would be to turn that into a
> dev_info() instead...
>
> P.P.S.: Having no GCE usually means that there's a performance issue! In that case,
> it's ... a mistake, so, an error, kind-of.... :-)
Given the performance impact, I agree that debug, and even info level is not a
good option. At the same time, the hardware still works correctly without the
GCE (as we have been running it so far without even realizing!), so I think
calling it an error is too much, and a warning would be the most suitable level,
as we just want to warn userspace: "Hey user, be advised that you're missing
GCE, so you'll get worse performance! It will still work though". What do you
think?
Thanks,
Nícolas
next prev parent reply other threads:[~2024-02-28 14:44 UTC|newest]
Thread overview: 4+ messages / expand[flat|nested] mbox.gz Atom feed top
2024-02-26 21:31 Nícolas F. R. A. Prado
2024-02-28 9:41 ` AngeloGioacchino Del Regno
2024-02-28 14:44 ` Nícolas F. R. A. Prado [this message]
2024-02-28 14:48 ` AngeloGioacchino Del Regno
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=957b44d3-ef48-4682-8db5-3261e582ac8f@notapiano \
--to=nfraprado@collabora.com \
--cc=angelogioacchino.delregno@collabora.com \
--cc=kernel@collabora.com \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-mediatek@lists.infradead.org \
--cc=matthias.bgg@gmail.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox
all inboxes | Powered by JetHome®