From: Jayesh Choudhary <j-choudhary@ti.com>
To: Aradhya Bhatia <a-bhatia1@ti.com>, Nishanth Menon <nm@ti.com>,
Vignesh Raghavendra <vigneshr@ti.com>,
Tero Kristo <kristo@kernel.org>, Rob Herring <robh+dt@kernel.org>,
Krzysztof Kozlowski <krzysztof.kozlowski+dt@linaro.org>,
Catalin Marinas <catalin.marinas@arm.com>,
Conor Dooley <conor+dt@kernel.org>, Will Deacon <will@kernel.org>,
Francesco Dolcini <francesco@dolcini.it>
Cc: Devicetree List <devicetree@vger.kernel.org>,
Linux Kernel List <linux-kernel@vger.kernel.org>,
Linux ARM Kernel List <linux-arm-kernel@lists.infradead.org>,
Tomi Valkeinen <tomi.valkeinen@ideasonboard.com>,
Rahul T R <r-ravikumar@ti.com>, Devarsh Thakkar <devarsht@ti.com>,
Jai Luthra <j-luthra@ti.com>
Subject: Re: [PATCH v4 5/6] arm64: dts: ti: k3-am625-beagleplay: Add HDMI support
Date: Tue, 8 Aug 2023 12:02:38 +0530 [thread overview]
Message-ID: <958bd2bc-4f82-fe42-264d-01a6bcb65990@ti.com> (raw)
In-Reply-To: <20230807153307.22174-6-a-bhatia1@ti.com>
On 07/08/23 21:03, Aradhya Bhatia wrote:
> From: Nishanth Menon <nm@ti.com>
>
> The DSS outputs DPI signals via its second video port (VP2). The DPI
> output from DSS is 24 bits (RGB888) and is forwarded to an HDMI
> transmitter (ITE-IT66121) on the BeaglePlay platform. For audio output,
> BeaglePlay uses mcasp1.
>
> Add pinmux info for DSS DPI signals.
>
> Further, add support for HDMI audio and video output.
>
> Signed-off-by: Nishanth Menon <nm@ti.com>
> [a-bhatia1: Edit sound node properties and HDMI node and label names]
> Signed-off-by: Aradhya Bhatia <a-bhatia1@ti.com>
> ---
> .../arm64/boot/dts/ti/k3-am625-beagleplay.dts | 158 ++++++++++++++++++
> 1 file changed, 158 insertions(+)
>
> diff --git a/arch/arm64/boot/dts/ti/k3-am625-beagleplay.dts b/arch/arm64/boot/dts/ti/k3-am625-beagleplay.dts
> index e07ddff22e07..582410be9570 100644
> --- a/arch/arm64/boot/dts/ti/k3-am625-beagleplay.dts
> +++ b/arch/arm64/boot/dts/ti/k3-am625-beagleplay.dts
> @@ -192,6 +192,34 @@ usr: button-usr {
>
> };
>
> + hdmi0: connector-hdmi {
> + compatible = "hdmi-connector";
> + label = "hdmi";
> + type = "a";
> + port {
> + hdmi_connector_in: endpoint {
> + remote-endpoint = <&it66121_out>;
> + };
> + };
> + };
> +
> + sound {
> + compatible = "simple-audio-card";
> + simple-audio-card,name = "it66121 HDMI";
> + simple-audio-card,format = "i2s";
> + simple-audio-card,bitclock-master = <&hdmi_dailink_master>;
> + simple-audio-card,frame-master = <&hdmi_dailink_master>;
> +
> + hdmi_dailink_master: simple-audio-card,cpu {
> + sound-dai = <&mcasp1>;
> + system-clock-direction-out;
> + };
> +
> + simple-audio-card,codec {
> + sound-dai = <&it66121>;
> + };
> + };
> +
> /* Workaround for errata i2329 - just use mdio bitbang */
> mdio0: mdio {
> compatible = "virtual,mdio-gpio";
> @@ -422,6 +450,57 @@ pmic_irq_pins_default: pmic-irq-default-pins {
> AM62X_IOPAD(0x01f4, PIN_INPUT_PULLUP, 0) /* (D16) EXTINTn */
> >;
> };
> +
> + hdmi_gpio_pins_default: hdmi-gpio-default-pins {
> + pinctrl-single,pins = <
> + AM62X_IOPAD(0x0094, PIN_INPUT_PULLUP | PIN_DEBOUNCE_CONF6, 7) /* (N20) GPMC0_BE1n.GPIO0_36 */
> + AM62X_IOPAD(0x0054, PIN_OUTPUT_PULLUP, 7) /* (P21) GPMC0_AD6.GPIO0_21 */
> + >;
> + };
> +
> + mcasp_hdmi_pins_default: mcasp-hdmi-default-pins {
> + pinctrl-single,pins = <
> + AM62X_IOPAD(0x0090, PIN_INPUT, 2) /* (M24) GPMC0_BE0n_CLE.MCASP1_ACLKX */
> + AM62X_IOPAD(0x0098, PIN_INPUT, 2) /* (U23) GPMC0_WAIT0.MCASP1_AFSX */
> + AM62X_IOPAD(0x008c, PIN_OUTPUT, 2) /* (L25) GPMC0_WEn.MCASP1_AXR0 */
> + AM62X_IOPAD(0x0088, PIN_INPUT, 2) /* (L24) GPMC0_OEn_REn.MCASP1_AXR1 */
> + AM62X_IOPAD(0x0084, PIN_INPUT, 2) /* (L23) GPMC0_ADVn_ALE.MCASP1_AXR2 */
> + AM62X_IOPAD(0x007c, PIN_INPUT, 2) /* (P25) GPMC0_CLK.MCASP1_AXR3 */
> + >;
> + };
> +
> + dss0_pins_default: dss0-default-pins {
> + pinctrl-single,pins = <
> + AM62X_IOPAD(0x0100, PIN_OUTPUT, 0) /* (AC25) VOUT0_VSYNC */
> + AM62X_IOPAD(0x00f8, PIN_OUTPUT, 0) /* (AB24) VOUT0_HSYNC */
> + AM62X_IOPAD(0x0104, PIN_OUTPUT, 0) /* (AC24) VOUT0_PCLK */
> + AM62X_IOPAD(0x00fc, PIN_OUTPUT, 0) /* (Y20) VOUT0_DE */
> + AM62X_IOPAD(0x00b8, PIN_OUTPUT, 0) /* (U22) VOUT0_DATA0 */
> + AM62X_IOPAD(0x00bc, PIN_OUTPUT, 0) /* (V24) VOUT0_DATA1 */
> + AM62X_IOPAD(0x00c0, PIN_OUTPUT, 0) /* (W25) VOUT0_DATA2 */
> + AM62X_IOPAD(0x00c4, PIN_OUTPUT, 0) /* (W24) VOUT0_DATA3 */
> + AM62X_IOPAD(0x00c8, PIN_OUTPUT, 0) /* (Y25) VOUT0_DATA4 */
> + AM62X_IOPAD(0x00cc, PIN_OUTPUT, 0) /* (Y24) VOUT0_DATA5 */
> + AM62X_IOPAD(0x00d0, PIN_OUTPUT, 0) /* (Y23) VOUT0_DATA6 */
> + AM62X_IOPAD(0x00d4, PIN_OUTPUT, 0) /* (AA25) VOUT0_DATA7 */
> + AM62X_IOPAD(0x00d8, PIN_OUTPUT, 0) /* (V21) VOUT0_DATA8 */
> + AM62X_IOPAD(0x00dc, PIN_OUTPUT, 0) /* (W21) VOUT0_DATA9 */
> + AM62X_IOPAD(0x00e0, PIN_OUTPUT, 0) /* (V20) VOUT0_DATA10 */
> + AM62X_IOPAD(0x00e4, PIN_OUTPUT, 0) /* (AA23) VOUT0_DATA11 */
> + AM62X_IOPAD(0x00e8, PIN_OUTPUT, 0) /* (AB25) VOUT0_DATA12 */
> + AM62X_IOPAD(0x00ec, PIN_OUTPUT, 0) /* (AA24) VOUT0_DATA13 */
> + AM62X_IOPAD(0x00f0, PIN_OUTPUT, 0) /* (Y22) VOUT0_DATA14 */
> + AM62X_IOPAD(0x00f4, PIN_OUTPUT, 0) /* (AA21) VOUT0_DATA15 */
> + AM62X_IOPAD(0x005c, PIN_OUTPUT, 1) /* (R24) GPMC0_AD8.VOUT0_DATA16 */
> + AM62X_IOPAD(0x0060, PIN_OUTPUT, 1) /* (R25) GPMC0_AD9.VOUT0_DATA17 */
> + AM62X_IOPAD(0x0064, PIN_OUTPUT, 1) /* (T25) GPMC0_AD10.VOUT0_DATA18 */
> + AM62X_IOPAD(0x0068, PIN_OUTPUT, 1) /* (R21) GPMC0_AD11.VOUT0_DATA19 */
> + AM62X_IOPAD(0x006c, PIN_OUTPUT, 1) /* (T22) GPMC0_AD12.VOUT0_DATA20 */
> + AM62X_IOPAD(0x0070, PIN_OUTPUT, 1) /* (T24) GPMC0_AD13.VOUT0_DATA21 */
> + AM62X_IOPAD(0x0074, PIN_OUTPUT, 1) /* (U25) GPMC0_AD14.VOUT0_DATA22 */
> + AM62X_IOPAD(0x0078, PIN_OUTPUT, 1) /* (U24) GPMC0_AD15.VOUT0_DATA23 */
> + >;
> + };
> };
>
> &mcu_pmx0 {
> @@ -670,6 +749,46 @@ &main_i2c2 {
> pinctrl-0 = <&i2c2_1v8_pins_default>;
> clock-frequency = <100000>;
> status = "okay";
> +
> + it66121: bridge-hdmi@4c {
> + compatible = "ite,it66121";
> + pinctrl-names = "default";
> + pinctrl-0 = <&hdmi_gpio_pins_default>;
> + reg = <0x4c>;
> +
> + #sound-dai-cells = <0>;
> +
> + interrupt-parent = <&main_gpio0>;
> + interrupts = <36 IRQ_TYPE_EDGE_FALLING>;
> +
> + vcn33-supply = <&vdd_3v3>;
> + vcn18-supply = <&buck2_reg>;
> + vrf12-supply = <&buck3_reg>;
> +
Fix unnecessary line breaks in this node.
> + reset-gpios = <&main_gpio0 21 GPIO_ACTIVE_LOW>;
> +
> + ports {
> + #address-cells = <1>;
> + #size-cells = <0>;
> +
> + port@0 {
> + reg = <0>;
> +
> + it66121_in: endpoint {
> + bus-width = <24>;
> + remote-endpoint = <&dpi1_out>;
> + };
> + };
> +
> + port@1 {
> + reg = <1>;
> +
> + it66121_out: endpoint {
> + remote-endpoint = <&hdmi_connector_in>;
> + };
> + };
> + };
> + };
> };
>
> &main_i2c3 {
> @@ -756,3 +875,42 @@ &main_uart6 {
> pinctrl-0 = <&wifi_debug_uart_pins_default>;
> status = "okay";
> };
> +
> +&dss {
> + status = "okay";
> + pinctrl-names = "default";
> + pinctrl-0 = <&dss0_pins_default>;
> +};
> +
> +&dss_ports {
> + /* VP2: DPI Output */
> + port@1 {
> + reg = <1>;
> +
> + dpi1_out: endpoint {
> + remote-endpoint = <&it66121_in>;
> + };
> + };
> +};
> +
> +&mcasp1 {
> + status = "okay";
> + #sound-dai-cells = <0>;
> +
> + pinctrl-names = "default";
> + pinctrl-0 = <&mcasp_hdmi_pins_default>;
> +
> + auxclk-fs-ratio = <2177>;
> +
> + op-mode = <0>; /* MCASP_IIS_MODE */
> + tdm-slots = <2>;
> +
Fix unnecessary line breaks in this node.
> + serial-dir = < /* 0: INACTIVE, 1: TX, 2: RX */
> + 1 0 0 0
> + 0 0 0 0
> + 0 0 0 0
> + 0 0 0 0
> + >;
> + tx-num-evt = <32>;
> + rx-num-evt = <32>;
> +};
next prev parent reply other threads:[~2023-08-08 20:18 UTC|newest]
Thread overview: 10+ messages / expand[flat|nested] mbox.gz Atom feed top
2023-08-07 15:33 [PATCH v4 0/6] arm64: ti: k3-am62: Add display support Aradhya Bhatia
2023-08-07 15:33 ` [PATCH v4 1/6] arm64: dts: ti: k3-am62x-sk-common: Update main-i2c1 frequency Aradhya Bhatia
2023-08-07 15:33 ` [PATCH v4 2/6] arm64: dts: ti: k3-am62-main: Add node for DSS Aradhya Bhatia
2023-08-08 6:19 ` Jayesh Choudhary
2023-08-07 15:33 ` [PATCH v4 3/6] arm64: dts: ti: k3-am62x-sk-common: Add HDMI support Aradhya Bhatia
2023-08-08 6:30 ` Jayesh Choudhary
2023-08-07 15:33 ` [PATCH v4 4/6] arm64: dts: ti: am62x-sk: Add overlay for HDMI audio Aradhya Bhatia
2023-08-07 15:33 ` [PATCH v4 5/6] arm64: dts: ti: k3-am625-beagleplay: Add HDMI support Aradhya Bhatia
2023-08-08 6:32 ` Jayesh Choudhary [this message]
2023-08-07 15:33 ` [PATCH v4 6/6] arm64: defconfig: Enable ITE_IT66121 HDMI transmitter Aradhya Bhatia
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=958bd2bc-4f82-fe42-264d-01a6bcb65990@ti.com \
--to=j-choudhary@ti.com \
--cc=a-bhatia1@ti.com \
--cc=catalin.marinas@arm.com \
--cc=conor+dt@kernel.org \
--cc=devarsht@ti.com \
--cc=devicetree@vger.kernel.org \
--cc=francesco@dolcini.it \
--cc=j-luthra@ti.com \
--cc=kristo@kernel.org \
--cc=krzysztof.kozlowski+dt@linaro.org \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-kernel@vger.kernel.org \
--cc=nm@ti.com \
--cc=r-ravikumar@ti.com \
--cc=robh+dt@kernel.org \
--cc=tomi.valkeinen@ideasonboard.com \
--cc=vigneshr@ti.com \
--cc=will@kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox
all inboxes | Powered by JetHome®