Re: [PATCH] net: phy: realtek: Fix setting of PHY LEDs Mode B bit on RTL8211F

[Marek Vasut <marex@denx.de>]

On 8/21/24 4:16 AM, Sava Jakovljev wrote:
> From: Sava Jakovljev <savaj@meyersound.com>
> 
> The current implementation incorrectly sets the mode bit of the PHY chip.
> Bit 15 (RTL8211F_LEDCR_MODE) should not be shifted together with the
> configuration nibble of a LED- it should be set independently of the
> index of the LED being configured.
> As a consequence, the RTL8211F LED control is actually operating in Mode A.
> Fix the error by or-ing final register value to write with a const-value of
> RTL8211F_LEDCR_MODE, thus setting Mode bit explicitly.
> 
> Fixes: 17784801d888 ("net: phy: realtek: Add support for PHY LEDs on RTL8211F")
> 
> Signed-off-by: Sava Jakovljev <savaj@meyersound.com>
> ---
>   drivers/net/phy/realtek.c | 3 ++-
>   1 file changed, 2 insertions(+), 1 deletion(-)
> 
> diff --git a/drivers/net/phy/realtek.c b/drivers/net/phy/realtek.c
> index 87865918dab6..25e5bfbb6f89 100644
> --- a/drivers/net/phy/realtek.c
> +++ b/drivers/net/phy/realtek.c
> @@ -555,7 +555,7 @@ static int rtl8211f_led_hw_control_set(struct phy_device *phydev, u8 index,
>   				       unsigned long rules)
>   {
>   	const u16 mask = RTL8211F_LEDCR_MASK << (RTL8211F_LEDCR_SHIFT * index);
> -	u16 reg = RTL8211F_LEDCR_MODE;	/* Mode B */
> +	u16 reg = 0;
>   
>   	if (index >= RTL8211F_LED_COUNT)
>   		return -EINVAL;
> @@ -575,6 +575,7 @@ static int rtl8211f_led_hw_control_set(struct phy_device *phydev, u8 index,
>   	}
>   
>   	reg <<= RTL8211F_LEDCR_SHIFT * index;
> +	reg |= RTL8211F_LEDCR_MODE;	 /* Mode B */

Nice find, thanks !

Reviewed-by: Marek Vasut <marex@denx.de>