From: <micky_ching@realsil.com.cn>
To: <sameo@linux.intel.com>
Cc: <devel@linuxdriverproject.org>, <linux-kernel@vger.kernel.org>,
<gregkh@linuxfoundation.org>, <rogerable@realtek.com>,
<wei_wang@realsil.com.cn>,
Micky Ching <micky_ching@realsil.com.cn>
Subject: [PATCH v4 2/2] mfd: rtsx: add support for card reader rtl8402
Date: Wed, 18 Dec 2013 10:03:13 +0800 [thread overview]
Message-ID: <96801e56ed43b42be976b3ebfde1a8822019df2d.1387331869.git.micky_ching@realsil.com.cn> (raw)
In-Reply-To: <cover.1387331869.git.micky_ching@realsil.com.cn>
From: Micky Ching <micky_ching@realsil.com.cn>
rtl8402 is much like rtl8411, so just add it to rtl8411.c
Signed-off-by: Micky Ching <micky_ching@realsil.com.cn>
---
drivers/mfd/rtl8411.c | 44 ++++++++++++++++++++++++++++++++++++++++----
drivers/mfd/rtsx_pcr.c | 5 +++++
drivers/mfd/rtsx_pcr.h | 1 +
3 files changed, 46 insertions(+), 4 deletions(-)
diff --git a/drivers/mfd/rtl8411.c b/drivers/mfd/rtl8411.c
index 00ecf6b..2d96552 100644
--- a/drivers/mfd/rtl8411.c
+++ b/drivers/mfd/rtl8411.c
@@ -191,24 +191,25 @@ static int rtl8411_card_power_off(struct rtsx_pcr *pcr, int card)
BPP_LDO_POWB, BPP_LDO_SUSPEND);
}
-static int rtl8411_switch_output_voltage(struct rtsx_pcr *pcr, u8 voltage)
+static int rtl8411_do_switch_output_voltage(struct rtsx_pcr *pcr, u8 voltage,
+ int bpp_tuned18_shift, int bpp_asic_1v8)
{
u8 mask, val;
int err;
- mask = (BPP_REG_TUNED18 << BPP_TUNED18_SHIFT_8411) | BPP_PAD_MASK;
+ mask = (BPP_REG_TUNED18 << bpp_tuned18_shift) | BPP_PAD_MASK;
if (voltage == OUTPUT_3V3) {
err = rtsx_pci_write_register(pcr,
SD30_DRIVE_SEL, 0x07, pcr->sd30_drive_sel_3v3);
if (err < 0)
return err;
- val = (BPP_ASIC_3V3 << BPP_TUNED18_SHIFT_8411) | BPP_PAD_3V3;
+ val = (BPP_ASIC_3V3 << bpp_tuned18_shift) | BPP_PAD_3V3;
} else if (voltage == OUTPUT_1V8) {
err = rtsx_pci_write_register(pcr,
SD30_DRIVE_SEL, 0x07, pcr->sd30_drive_sel_1v8);
if (err < 0)
return err;
- val = (BPP_ASIC_1V8 << BPP_TUNED18_SHIFT_8411) | BPP_PAD_1V8;
+ val = (bpp_asic_1v8 << bpp_tuned18_shift) | BPP_PAD_1V8;
} else {
return -EINVAL;
}
@@ -216,6 +217,18 @@ static int rtl8411_switch_output_voltage(struct rtsx_pcr *pcr, u8 voltage)
return rtsx_pci_write_register(pcr, LDO_CTL, mask, val);
}
+static int rtl8411_switch_output_voltage(struct rtsx_pcr *pcr, u8 voltage)
+{
+ return rtl8411_do_switch_output_voltage(pcr, voltage,
+ BPP_TUNED18_SHIFT_8411, BPP_ASIC_1V8);
+}
+
+static int rtl8402_switch_output_voltage(struct rtsx_pcr *pcr, u8 voltage)
+{
+ return rtl8411_do_switch_output_voltage(pcr, voltage,
+ BPP_TUNED18_SHIFT_8402, BPP_ASIC_2V0);
+}
+
static unsigned int rtl8411_cd_deglitch(struct rtsx_pcr *pcr)
{
unsigned int card_exist;
@@ -295,6 +308,22 @@ static const struct pcr_ops rtl8411_pcr_ops = {
.force_power_down = rtl8411_force_power_down,
};
+static const struct pcr_ops rtl8402_pcr_ops = {
+ .fetch_vendor_settings = rtl8411_fetch_vendor_settings,
+ .extra_init_hw = rtl8411_extra_init_hw,
+ .optimize_phy = NULL,
+ .turn_on_led = rtl8411_turn_on_led,
+ .turn_off_led = rtl8411_turn_off_led,
+ .enable_auto_blink = rtl8411_enable_auto_blink,
+ .disable_auto_blink = rtl8411_disable_auto_blink,
+ .card_power_on = rtl8411_card_power_on,
+ .card_power_off = rtl8411_card_power_off,
+ .switch_output_voltage = rtl8402_switch_output_voltage,
+ .cd_deglitch = rtl8411_cd_deglitch,
+ .conv_clk_and_div_n = rtl8411_conv_clk_and_div_n,
+ .force_power_down = rtl8411_force_power_down,
+};
+
static const struct pcr_ops rtl8411b_pcr_ops = {
.fetch_vendor_settings = rtl8411b_fetch_vendor_settings,
.extra_init_hw = rtl8411b_extra_init_hw,
@@ -471,3 +500,10 @@ void rtl8411b_init_params(struct rtsx_pcr *pcr)
else
set_pull_ctrl_tables(pcr, rtl8411b_qfn64);
}
+
+void rtl8402_init_params(struct rtsx_pcr *pcr)
+{
+ rtl8411_init_common_params(pcr);
+ pcr->ops = &rtl8402_pcr_ops;
+ set_pull_ctrl_tables(pcr, rtl8411);
+}
diff --git a/drivers/mfd/rtsx_pcr.c b/drivers/mfd/rtsx_pcr.c
index 11e20af..2af55bb 100644
--- a/drivers/mfd/rtsx_pcr.c
+++ b/drivers/mfd/rtsx_pcr.c
@@ -57,6 +57,7 @@ static DEFINE_PCI_DEVICE_TABLE(rtsx_pci_ids) = {
{ PCI_DEVICE(0x10EC, 0x5227), PCI_CLASS_OTHERS << 16, 0xFF0000 },
{ PCI_DEVICE(0x10EC, 0x5249), PCI_CLASS_OTHERS << 16, 0xFF0000 },
{ PCI_DEVICE(0x10EC, 0x5287), PCI_CLASS_OTHERS << 16, 0xFF0000 },
+ { PCI_DEVICE(0x10EC, 0x5286), PCI_CLASS_OTHERS << 16, 0xFF0000 },
{ 0, }
};
@@ -1061,6 +1062,10 @@ static int rtsx_pci_init_chip(struct rtsx_pcr *pcr)
case 0x5287:
rtl8411b_init_params(pcr);
break;
+
+ case 0x5286:
+ rtl8402_init_params(pcr);
+ break;
}
dev_dbg(&(pcr->pci->dev), "PID: 0x%04x, IC version: 0x%02x\n",
diff --git a/drivers/mfd/rtsx_pcr.h b/drivers/mfd/rtsx_pcr.h
index e9feadb..07e4c2e 100644
--- a/drivers/mfd/rtsx_pcr.h
+++ b/drivers/mfd/rtsx_pcr.h
@@ -30,6 +30,7 @@
void rts5209_init_params(struct rtsx_pcr *pcr);
void rts5229_init_params(struct rtsx_pcr *pcr);
void rtl8411_init_params(struct rtsx_pcr *pcr);
+void rtl8402_init_params(struct rtsx_pcr *pcr);
void rts5227_init_params(struct rtsx_pcr *pcr);
void rts5249_init_params(struct rtsx_pcr *pcr);
void rtl8411b_init_params(struct rtsx_pcr *pcr);
--
1.7.9.5
next prev parent reply other threads:[~2013-12-18 2:04 UTC|newest]
Thread overview: 5+ messages / expand[flat|nested] mbox.gz Atom feed top
2013-12-18 2:03 [PATCH v4 0/2] mfd: rtsx: decrease driver size and add new device micky_ching
2013-12-18 2:03 ` [PATCH v4 1/2] mfd: rtsx: add set pull control macro and simplify rtl8411 micky_ching
2013-12-18 2:03 ` micky_ching [this message]
2013-12-18 6:53 ` [PATCH v4 0/2] mfd: rtsx: decrease driver size and add new device Dan Carpenter
2013-12-18 9:26 ` Lee Jones
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=96801e56ed43b42be976b3ebfde1a8822019df2d.1387331869.git.micky_ching@realsil.com.cn \
--to=micky_ching@realsil.com.cn \
--cc=devel@linuxdriverproject.org \
--cc=gregkh@linuxfoundation.org \
--cc=linux-kernel@vger.kernel.org \
--cc=rogerable@realtek.com \
--cc=sameo@linux.intel.com \
--cc=wei_wang@realsil.com.cn \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox
all inboxes | Powered by JetHome®